Abstract
The elastic analysis of thick-walled spheres made of functionally graded materials (FGMs) is considered to be one of the most important areas in many engineering designs. This paper presents the stresses and displacement fields in an FGM thick-walled sphere under constant interior and exterior pressure. The investigation was carried out using analytical and numerical methods. Exact and finite element (FE) models of the pressurized spherical vessel were created, assuming and implementing continuous changing of Young modulus along the radial direction. It is considered that the elastic modulus of the FGMs varies with thickness according to the nonlinear generalized formula. For a pressurized FGM sphere, the analytical solutions for displacement and stress distribution were developed and demonstrated in the radial direction. Finally, the analytical results are compared to the results from the FE analysis.
Similar content being viewed by others
References
Benslimane, A., Bouzidi, S., Methia, M.: Displacements and stresses in pressurized thick-walled FGM cylinders: exact and numerical solutions. Int. J. Press. Vessel. Pip. 168, 219–224 (2018)
Sharma, D., Kaur, R.: Thermoelastic analysis of FGM hollow cylinder for variable parameters and temperature distributions using FEM. Nonlinear Eng. 9, 256–264 (2020)
Benslimane, A., Benchallal, R., Mammeri, S., Methia, M., Khadimallah, M.A.: Investigation of displacements and stresses in thick-walled FGM cylinder subjected to thermo-mechanical loadings. Int. J. Comput. Methods Eng. Sci. Mech. 22, 138–149 (2020)
Kiani, Y., Eslami, M.R.: The GDQ approach to thermally nonlinear generalized thermoelasticity of a hollow sphere. Int. J. Mech. Sci. 118, 195–204 (2016)
Farhan, A.M., Abd-Alla, A.M., Khder, M.A.: Solution of a problem of thermal stresses in a non-homogeneous thermoelastic infinite medium of isotropic material by finite difference method. J. Ocean Eng. Sci. 4, 256–262 (2019)
Celebi, K., Yarimpabuç, D., Keles, I.: A novel approach to thermal and mechanical stresses in a FGM cylinder with exponentially-varying properties. J. Theor. Appl. Mech. 55, 343–351 (2017)
Bahoum, K., Diany, M., Mabrouki, M.: Stress analysis of compound cylinders subjected to thermo-mechanical loads. J. Mech. Sci. Technol. 31, 1805–1811 (2017)
Das, P., Islam, M.A., Somadder, S., Hasib, M.A.: Analytical and numerical analysis of functionally graded (FGM) axisymmetric cylinders under thermo-mechanical loadings. Mater. Today Commun. 33, 104405 (2022)
Tutuncu, N., Ozturk, M.: Exact solutions for stresses in functionally graded pressure vessels. Compos. Part B Eng. 32, 683–686 (2001)
You, L.H., Zhang, J.J., You, X.Y.: Elastic analysis of internally pressurized thick-walled spherical pressure vessels of functionally graded materials. Int. J. Press. Vessel. Pip. 82, 347–354 (2005)
Eslami, M.R., Babaei, M.H., Poultangari, R.: Thermal and mechanical stresses in a functionally graded thick sphere. Int. J. Press. Vessel. Pip. 82, 522–527 (2005)
Poultangari, R., Jabbari, M., Eslami, M.R.: Functionally graded hollow spheres under non-axisymmetric thermo-mechanical loads. Int. J. Press. Vessel. Pip. 85, 295–305 (2008)
Chen, Y.Z., Lin, X.Y.: Elastic analysis for thick cylinders and spherical pressure vessels made of functionally graded materials. Comput. Mater. Sci. 44, 581–587 (2008)
Tutuncu, N., Temel, B.: A novel approach to stress analysis of pressurized FGM cylinders, disks and spheres. Compos. Struct. 91, 385–390 (2009)
Borisov, A.V.: Elastic analysis of multilayered thick-walled spheres under external load. Mechanics. 84, 28–32 (2010)
Sadeghian, M., Toussi, H.E.: Axisymmetric yielding of functionally graded spherical vessel under thermo-mechanical loading. Comput. Mater. Sci. 50, 975–981 (2011)
Nejad, M.Z., Abedi, M., Lotfian, M.H., Ghannad, M.: An exact solution for stresses and displacements of pressurized FGM thick-walled spherical shells with exponential-varying properties. J. Mech. Sci. Technol. 26, 4081–4087 (2012)
Karami, K., Abedi, M., Zamani Nejad, M., Lotfian, M.H.: Elastic analysis of heterogeneous thick-walled spherical pressure vessels with parabolic varying properties. Front. Mech. Eng. 7, 433–438 (2012)
Atashipour, S.A., Sburlati, R., Atashipour, S.R.: Elastic analysis of thick-walled pressurized spherical vessels coated with functionally graded materials. Meccanica 49, 2965–2978 (2014). https://doi.org/10.1007/s11012-014-0047-2
Dryden, J., Jayaraman, K.: Effect of inhomogeneity on the stress in pipes. J. Elast. 83, 179–189 (2006)
Bell, W.W.: Special functions for scientists and engineers. Courier Corporation, USA (2004)
Abramowitz, M., Stegun, I.A., Romer, R.H.: Handbook of mathematical functions with formulas, graphs, and mathematical tables. Am. J. Phys. 56, 958 (1988)
Acknowledgements
We would like to thank and sincerely acknowledge the computational facilities provided by the Department of Mechanical Engineering, Khulna University of Engineering & Technology.
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflict of interest
We would like to confirm that there is no known conflict of interests associated with this publication, and there has been no significant financial support for this work that could have influenced its outcome.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Das, P., Islam, M.A., Somadder, S. et al. Analytical and numerical solutions of pressurized thick-walled FGM spheres. Arch Appl Mech 93, 2781–2792 (2023). https://doi.org/10.1007/s00419-023-02406-3
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00419-023-02406-3