Abstract
We evaluate how hotspots of different types of extreme summertime heat change under global warming increase of up to \(4\,^\circ \hbox {C}\); and which level of global warming allows us to avert the risk of these hotspots considering the irreducible range of possibilities defined by well-sampled internal variability. We use large samples of low-probability extremes simulated by the 100-member Max Planck Institute Grand Ensemble (MPI-GE) for five metrics of extreme heat: maximum absolute temperatures, return periods of extreme temperatures, maximum temperature variability, sustained tropical nights, and wet bulb temperatures. At \(2\,^\circ \hbox {C}\) of warming, MPI-GE projects maximum summer temperatures below \(50\,^\circ \hbox {C}\) over most of the world. Beyond \(2\,^\circ \hbox {C}\), this threshold is overshot in all continents, with the maximum projected temperatures in hotspots over the Arabic Peninsula. Extreme 1-in-100-years pre-industrial temperatures occur every 10–25 years already at \(1.5\,^\circ \hbox {C}\) of warming. At \(4\,^\circ \hbox {C}\), these 1-in-100-years extremes are projected to occur every 1 to 2 years over most of the world. The range of maximum temperature variability increases by 10–50% at \(2\,^\circ \hbox {C}\) of warming, and by 50–100% at \(4\,^\circ \hbox {C}\). Beyond \(2\,^\circ \hbox {C}\), heat stress is aggravated substantially over non-adapted areas by hot and humid conditions that occur rarely in a pre-industrial climate; while extreme pre-industrial tropical night conditions become common-pace already at \(1.5\,^\circ \hbox {C}\). At \(4\,^\circ \hbox {C}\) of warming, tropical night hotspots spread polewards globally, and are sustained during more than 99% of all summer months in the tropics; whilst extreme monthly mean wet bulb temperatures beyond \(26\,^\circ \hbox {C}\) spread both over large tropical as well as mid-latitude regions.
Similar content being viewed by others
Avoid common mistakes on your manuscript.
1 Introduction
Extreme heat will become more likely and more extreme under global warming (Meehl and Tebaldi 2004; IPCC 2013; Mora et al. 2017; Lewis et al. 2019). Extreme heat leads to increased heat-related mortality and illness, worsening the risk of heat exhaustion, dehydration, and cardio-vascular and kidney diseases (Kjellstrom et al. 2010; De Blois et al. 2015; Guo et al. 2017; Lee et al. 2019). Furthermore, it can also lead to ecological and socio-economical impacts, such as decreased labour productivity, increased risk of wildfires, decreased agricultural efficiency, habitat loss, ecosystem and crop failure, as well as render some regions partially uninhabitable (Kjellstrom et al. 2010; Sherwood and Huber 2010; Dunne et al. 2013; Gourdji et al. 2013; IPCC 2014; Bowman et al. 2017). Already under current global warming, extreme temperatures and high humidity together with insufficient infrastructure caused the death of thousands in the 2015 heatwaves in India and Pakistan (Wehner et al. 2016). Similarly, the combination of extreme daytime temperatures and lack of nighttime cooling caused more than 70.000 additional deaths over 16 European countries during the 2003 summer (Robine et al. 2008; Laaidi et al. 2012; Mitchell et al. 2016). By 2 °C of global warming above pre-industrial levels, one out of every two summer months are projected to be on average warmer than the extreme 2010 summer over Europe (Suarez-Gutierrez et al. 2018); and over parts of India and Pakistan, conditions equivalent to the 2015 heatwave could occur every year (Matthews et al. 2017). Here we investigate how global warming aggravates extreme summertime heat based on a robust sampling of high-impact, low-probability extremes for five different heat metrics, simulated by the largest ensemble of a comprehensive coupled-model. Our ultimate goal is twofold: to identify which regions become major risk hotspots for different forms of extreme heat, and to determine which maximum global warming level allows us to avert these risks, once the irreducible uncertainty that arises from internal variability is taken into account.
Extreme events are by definition rare, and occur intrinsically by chance due to chaotic internal variability. Therefore, to evaluate how the strength and frequency of such extremes change under warming, it is crucial to sufficiently sample internal variability. This sufficient sampling is necessary to capture the low-probability extremes at the tails of the distribution robustly, as the distribution itself changes under warming, and eliminates the need for the parametrizations of extreme value statistics. Furthermore, probability distributions that are well defined up to their tails for different levels of global warming are crucial to distinguish which events could be avoided by limiting global warming to fixed target temperature levels, versus which events are within the irreducible range of possibilities for such warming levels (Suarez-Gutierrez et al. 2018). Single-model large ensembles of simulations from comprehensive, fully-coupled climate models are the best available tools to sample internal variability and thus to evaluate the changing characteristics of low-probability extreme events in a warming world. Here, we use the currently largest of such ensembles: the 100-member Max Planck Institute Grand Ensemble (MPI-GE; Maher et al. 2019).
To evaluate how global warming aggravates heat extremes it is also crucial to consider the most relevant elements that define our vulnerability to extreme heat. The foremost element of extreme heat events are maximum temperatures. Yet some of the events with the largest impacts to date were events that combined the effect of extreme temperatures with other conditions that exacerbate heat stress, such as high humidity or nighttime temperatures (Laaidi et al. 2012; Wehner et al. 2016). To combine all these aspects, we evaluate the risk of extreme summertime heat with five different metrics: (i) maximum absolute temperatures, (ii) return periods of very extreme temperatures, (iii) maximum temperature variability, (iv) sustained tropical night temperatures, and (v) wet bulb temperatures.
To identify where summertime temperatures become most extreme under warming we investigate (i) maximum absolute temperatures. In contrast, we assess how frequent fixed extreme temperature levels that were very extreme under pre-industrial conditions become in terms of (ii) return periods of maximum temperatures. Another key aspect of our vulnerability to extreme heat that we investigate is (iii) absolute maximum temperature variability range, and how it changes in a warmer world. In climates of low temperature variability, such as the tropics, a shift towards a warmer mean state may imply conditions outside the historical range of adaptation and acclimatization, with relatively small temperature fluctuations resulting in large impacts (Mahlstein et al. 2011; Harrington et al. 2016; Gasparrini et al. 2017; King and Harrington 2018; Samset et al. 2019). Climates of high temperature variability, such as mid-latitude continental interiors, face a broad range of possible conditions, thus low-probability extremes characteristic of higher warming levels may happen before possible adaptation (Suarez-Gutierrez et al. 2018). Moreover, heat stress can worsen if variability changes under warming. An increase in variability, as projected over certain regions (Fischer et al. 2012; Donat et al. 2017; Bathiany et al. 2018; Suarez-Gutierrez et al. 2020), leads to heat extremes with increased amplitude and frequency, and to overall larger deviations from the mean state that impose bigger adaptational challenges. On the other hand, a decrease in variability implies that the effects of global warming are less likely to be temporarily counteracted by internal variability on any given summer, resulting on summer temperatures that are consistently warmer.
Alongside extreme maximum daytime temperature, heat stress can be exacerbated due to an absence of nighttime cooling that impedes organisms to recover from extreme daytime heat (Laaidi et al. 2012). These tropical night conditions occur when nighttime minimum temperatures are above \(20\,^\circ \hbox {C}\) to \(28\,^\circ \hbox {C}\), depending on the average climatic conditions of the region. Our bodies can, with time and within physiological limits, acclimatize to these conditions (Kjellstrom et al. 2010; Vicedo-Cabrera et al. 2018). However, for unadapted individuals in unadapted environments, this lack of restorative cooling is directly linked to increased heat-related hospitalizations and mortality, particularly if sustained over several days (Basu and Samet 2002; Laaidi et al. 2012; Royé 2017; Murage et al. 2017; Guo et al. 2017; Russo et al. 2019). There is overall agreement that a shift towards a warmer mean state results in higher minimum temperatures (Russo and Sterl 2011). Yet it remains unclear to what extent sustained tropical night conditions can be averted by limiting global warming. We investigate how (iv) the probability of tropical night conditions sustained for an entire month changes under warming, and quantify the maximum global warming level that allows us to avoid these conditions over non-adapted areas.
Lastly, we investigate extreme heat conditions involving simultaneous high temperature and humidity. Under high humidity, evaporative cooling loses efficiency, and combined with extreme temperatures, we become unable to maintain a stable body temperature (Sherwood and Huber 2010). Some evidence indicates that high humidity during extreme high temperature events in recent years does not significantly increase observed total mortality (Armstrong et al. 2019). On the other hand, studies find aggravated heat stress and associated mortality for observed high humidity and simultaneous high temperatures above certain thresholds (Mora et al. 2017); and that these thresholds are rarely surpassed under current global warming levels (Sherwood and Huber 2010; Im et al. 2017). The combined effect of temperature and humidity can be quantified using a variety of indices (Willett and Sherwood 2012; Buzan et al. 2015). We focus on one of the most commonly used, (v) wet bulb temperature (W; Sherwood and Huber 2010; Pal and Eltahir 2015; Im et al. 2017; Coffel et al. 2018; Brouillet and Joussaume 2019). W is defined as the temperature that an air parcel would reach through evaporative cooling once is fully saturated. As opposed to comfort-based heat indexes (Russo et al. 2017; Matthews et al. 2017; Li et al. 2018) or more complex heat stress measures considering the effect of wind chill and solar irradiation (Dunne et al. 2013; Fischer and Knutti 2013; Newth and Gunasekera 2018), W establishes the clear thermodynamic threshold of \(35\,^\circ \hbox {C}\) for which health impacts cannot be overcome by adaptation (Sherwood and Huber 2010). Exposure to instantaneous W values above \(35\,^\circ \hbox {C}\) during periods as short as a few hours may be lethal even for acclimated healthy individuals. However, harmful to deadly levels of heat stress can occur at instantaneous W levels as low as \(28\,^\circ \hbox {C}\), depending on individual conditions and level of physical activity (Dunne et al. 2013; Buzan et al. 2015; Coffel et al. 2018). Here we investigate how the most extreme W events change under warming, and determine the maximum global warming for which dangerous levels of W can be avoided.
Most previous studies evaluating how these heat stress metrics change under global warming are based on smaller multi-model ensembles (Dunne et al. 2013; Fischer and Knutti 2013; Seneviratne et al. 2016; Donat et al. 2017; Mishra et al. 2017; Matthews et al. 2017; Russo et al. 2017; Mora et al. 2017; Newth and Gunasekera 2018; Coffel et al. 2018; Li et al. 2018; Bathiany et al. 2018; Brouillet and Joussaume 2019), smaller regional model ensembles (Pal and Eltahir 2015; Im et al. 2017), atmosphere-only ensembles (Lewis et al. 2019), or smaller single-model ensembles (Sherwood and Huber 2010; Willett and Sherwood 2012; Mishra et al. 2017). These smaller ensemble sizes imply a potential misrepresentation of the severity of future extremes in these studies. In particular, and additionally to being based on multi-model ensembles, most studies of variability change under warming are constrained to using detrended quantities and standard deviation changes as a proxy for variability (Fischer et al. 2012; Donat et al. 2017; Bathiany et al. 2018). However, this combination does not allow a clean separation between internal variability and forced warming, and can lead to misleading results. Lastly, most studies explore changes linked to different forcing scenarios (e.g., Dunne et al. 2013; Fischer and Knutti 2013; Matthews et al. 2017; Coffel et al. 2018; Li et al. 2018; Bathiany et al. 2018; Brouillet and Joussaume 2019), complicating the link to changes under different global warming levels (e.g., Russo et al. 2017; Mishra et al. 2017).
In contrast, we base our analysis on the currently largest existing initial-condition ensemble of a comprehensive, fully-coupled Earth System Model—largest both in terms of forcing scenarios represented and in terms of independent members (Maher et al. 2019). MPI-GE consists of sets of 100 independent realizations under the same forcing conditions that start from different initial states, and allows for 1-in-100-years events to occur on average every simulated year. This design enables the characterization of internal variability that is well-sampled and not confounded by different responses to forcing or model configurations. In turn, these requirements are crucial to empirically evaluate the statistical significance of changes in extreme events, as well as in the range of events that are possible under different levels of global warming. In addition, MPI-GE presents a unique diversity of forcing conditions. This diversity allows us to robustly characterize and compare the well-sampled climates at \(0\,^\circ \hbox {C}\), \(1.5\,^\circ \hbox {C}\), \(2\,^\circ \hbox {C}\), \(3\,^\circ \hbox {C}\) and \(4\,^\circ \hbox {C}\) of global warming above pre-industrial conditions.
2 Data and methods
We use transient climate MPI-GE simulations under historical forcing and three future representative concentration pathways (RCP), namely RCP2.6, RCP4.5, and RCP8.5 (Bittner et al. 2016; Suarez-Gutierrez et al. 2017; Maher et al. 2019). The ensemble consists of sets of 100 realizations based on the same model physics and parametrizations and driven by the same external forcings, that start from different initial climate states taken from different points of the model’s pre-industrial control run. MPI-GE uses the model version MPI-ESM1.1 in the low resolution (LR) configuration, with resolution T63 and 47 vertical levels in the atmosphere (Giorgetta et al. 2013) and \(1.5\,^\circ\) resolution and 40 vertical levels in the ocean (Jungclaus et al. 2013). MPI-ESM1.1 is fairly similar to the the CMIP5 version of MPI-ESM (Taylor et al. 2012), but has a slightly lower equilibrium climate sensitivity of \(2.8\,^\circ \hbox {C}\) (Flato et al. 2013; Mauritsen et al. 2019). The relatively low resolution in MPI-ESM-LR is comparable to most of the models in the CMIP5 ensemble, and can influence the model’s ability to simulate small-scale processes and affect the reliability of our projections. Despite this, MPI-GE is capable of simulating extreme heat events as extreme as observed, i.e. the 2003 and 2010 European summers (Suarez-Gutierrez et al. 2018, 2020), unlike other large ensemble experiments of smaller size (Schaller et al. 2018).
We define changing global warming levels using global mean surface temperature (GMST), defined as the annually averaged, global mean, near-surface 2m air temperature anomaly with respect to pre-industrial conditions defined by the period 1851–1880. We focus on summer months defined as JJA for the Northern Hemisphere and DJF for the Southern Hemisphere. Probabilities, return levels, and return periods are calculated based on non-parametric empirical distributions. We use monthly-frequency output data available from MPI-GE to define the heat metrics used. We use the summer maximum value of daily maximum temperature (TXx), defined as the block maximum temperature reached each summer at each grid cell. We evaluate the likelihood of experiencing sustained tropical night conditions during an entire month, for summer months with block minimum values of daily minimum temperatures (TNn) above the tropical night threshold defined as the 95th percentile level of pre-indutrial minimum temperature TNn at each grid cell. We construct monthly wet-bulb temperature estimates (W) using monthly averages of near-surface 2m air temperatures and relative humidity based on the method described in Stull (2011). Ideally, to obtain the most accurate results W should be calculated instantaneously at the model time step. However, this is not possible in MPI-GE, with only monthly mean relative humidity output available. Calculating monthly W using monthly mean temperature and humidity, as opposed to calculating monthly W averages based on instantaneous data, can lead to a maximum overestimation of up to \(1.5\,^\circ \hbox {C}\) (Buzan et al. 2015). Although this overestimation varies with temperature, its 90% confidence range remains below \(0.5\,^\circ \hbox {C}\), and its median is in the 0.005-\(0.2\,^\circ \hbox {C}\) range for all temperatures considered (Buzan et al. 2015). To counteract this potential bias, we subtract the maximum median overestimation of \(0.2\,^\circ \hbox {C}\) from the monthly W estimates in this study. This correction does not alter our conclusions, and results for uncorrected W values are shown in the Supporting Information (SI) Fig. S2 and S3.
We construct representative samples of the climate conditions at \(0\,^\circ \hbox {C}\), \(1.5\,^\circ \hbox {C}\), \(2\,^\circ \hbox {C}\), \(3\,^\circ \hbox {C}\) and \(4\,^\circ \hbox {C}\) of mean global warming with respect to pre-industrial levels using MPI-GE transient climate simulations. GMST deviates from the long-term mean state on year-to-year timescales due to the effect of internal variability. Therefore, we calculate centered decadal-averaged GMST to robustly define each global warming level (Suarez-Gutierrez et al. 2018). We define years of \(0\,^\circ \hbox {C}\) of global warming as those years in which the centered decadal-averaged GMST is in the range of \(0 \pm 0.25\,^\circ \hbox {C}\) in the historical MPI-GE simulations. Analogously, for the remaining global warming levels we select years in which the centered decadal-averaged GMST is in the range of \(1.5\pm 0.25\,^\circ \hbox {C}\) from RCP2.6 simulations, \(2\pm 0.25\,^\circ \hbox {C}\) from RCP4.5 simulations, and \(3\pm 0.25\,^\circ \hbox {C}\) and \(4\pm 0.25\,^\circ \hbox {C}\) from RCP8.5 simulations. This time-slice method to define global warming levels from transient simulations is similar to the methods used in Schleussner et al. (2016); James et al. (2017); King and Karoly (2017) or Suarez-Gutierrez et al. (2018). However, we define each level based on a slightly larger range of decadal averaged GMST, to reach an adequate and homogeneous sample size of around 1000 simulated years for each warming level.
The climates at \(0\,^\circ \hbox {C}\), \(1.5\,^\circ \hbox {C}\) and \(2\,^\circ \hbox {C}\) of global warming are defined from transient simulations that are in a near-equilibrium state. On the other hand, the climates at \(3\,^\circ \hbox {C}\) and \(4\,^\circ \hbox {C}\) of global warming are defined from highly transient simulations, due to the lack of near-equilibrium simulations for higher warming levels. Similar highly transient simulations are commonly used to define fixed global warming levels (Schleussner et al. 2016; King and Karoly 2017). However, the climate conditions sampled from transient runs may differ from the near-equilibrium conditions at said warming level, such as in different warming patterns or different ocean heat content distributions (Gregory et al. 2015; Rogelj et al. 2017; Tebaldi and Knutti 2018; Rugenstein et al. 2019; King et al. 2020). On average, mean summer temperatures could be around 0.1–0.8 °C higher over some land areas in transient climates compared to their GMST-equivalent equilibrium states (King et al. 2020). The use of highly transient runs also implies that climates with slightly higher or lower levels of warming may be oversampled. Additionally, part of the differences between each warming level sampled from different RCPs may arise from differences beyond \(\hbox {CO}{_2}\) atmospheric concentrations, such as different land use changes or aerosol forcings.
2.1 MPI-GE evaluation
To evaluate the ability of MPI-GE to simulate observed current climate conditions globally, we compare it to the \(1{\,^\circ } \times 1{\,^\circ }\) gridded data from Berkeley Earth Surface Temperatures (BEST) climatology and monthly maximum temperature anomaly for the period 1850–2018 (Rohde et al. 2012). The average summertime monthly absolute maximum temperatures for current climate conditions defined by the period of 1990–2018 in MPI-GE are in good agreement to BEST observations in most regions of the world. MPI-GE average absolute maximum temperatures are larger than observations for parts of Australia, West Asia, or North and South America. In contrast, the simulated average is smaller than observations over parts of East Asia and most tropical regions, respectively highlighting areas where MPI-GE projections may over- or underestimate the risk in summertime heat extremes (Fig. 1).
We evaluate how MPI-GE captures the variability and forced changes in observed maximum summer temperatures using the evaluation framework in Suarez-Gutierrez et al. (2018) and Maher et al. (2019). This framework allows us to evaluate the whole simulated distribution, including its tails, and offers a more appropriate assessment of the simulated representation of the magnitude and frequency of observed extremes (Suarez-Gutierrez et al. 2018). We find that more than 85% of observed estimates occur within the central 75th percentile range of the ensemble over large regions; thus indicating that MPI-GE may overestimate the observed variability range in maximum temperatures in some regions (Fig. 2). In regions such as Europe or North America, this overestimation of variability translates in warm extremes that are adequately represented, while the magnitude of cold extremes appears to be overestimated (Fig. 2a, b), highlighting a bias in the shape or skewness of the simulated distribution. On the other hand, in regions such as the Persian Gulf or South Africa, we find that variability is overestimated both in the upper and lower tails of the simulated distribution. This tendency to overestimate the variability in observed maximum temperatures may indicate that MPI-GE also overestimates future projections of maximum temperatures. However, summer maximum temperatures exhibit large internal variability (Suarez-Gutierrez et al. 2018), and the observational record may be too short to sample long return period events at the same rate as the ensemble. Thus, hindering our ability to determine whether the amplitude and frequency of extreme events is truly overestimated in MPI-GE. However, we also find that observations occur within the ensemble spread in most land surfaces, with the exceptions of Central Africa or East Asia (Fig. 2). The spread in MPI-GE captures the magnitude of observed extremes adequately both under pre-industrial conditions and under historical global warming levels. This indicates that MPI-GE does not underestimate the observed variability in maximum temperatures, and it also does not under or overestimate the forced warming response. Therefore, our evaluation shows that MPI-GE provides an adequate, albeit potentially overestimated projection of the risk of future summertime heat.
3 Results and discussion
We construct the range of the climate conditions at five different global warming levels from MPI-GE simulations under historical, RCP2.6, RCP4.5, and RCP8.5 forcings (Fig. 3). To achieve homogeneous sample sizes of around 1000 simulated years for each climate conditions, we restrict our selection to the periods marked by the dashed black lines in Fig. 3a. The calculated probability distributions of GMST for the simulated years selected show the effect of sampling near-equilibrium conditions, as for GMST levels of \(0\,^\circ \hbox {C}\), \(1.5\,^\circ \hbox {C}\), or \(2\,^\circ \hbox {C}\), in comparison to sampling highly transient conditions, as for \(3\,^\circ \hbox {C}\) and \(4\,^\circ \hbox {C}\) of GMST (Fig. 3b). The latter exhibit GMST values that are more variable, resulting in wider probability distributions. However, the distributions are adequately centered around the represented GMST levels and present no substantial overlap, indicating that each sample distribution is distinguishable from the others and offers an adequate representation of the climate conditions of each warming level.
3.1 Maximum absolute temperatures
Maximum summer values of maximum monthly temperatures (TXx) in MPI-GE are comparable to the maximum temperatures observed at our current warming level conditions of around \(1\,^\circ \hbox {C}\) above pre-industrial levels (Hawkins et al. 2017) (Fig. 4). Observations represent the maximum value of the spatial average of maximum temperatures in each grid cell. Thus, localized maxima may be smoothed within each grid-cell, leading to maximum temperatures that are slightly lower than the maximum temperatures for specific locations (Fischer et al. 2013). With this consideration in mind, we find that although the observed temperature patterns are well represented in MPI-GE, the maximum absolute temperatures under pre-industrial conditions in the MPI-GE simulations are similar or higher than those observed under current global warming levels (Fig. 4, top). In regions such as North America, Argentina, Western Asia or Australia, this may occur because MPI-GE simulates maximum temperatures on average warmer than those observed (Fig. 1). In contrast, this can also occur due to a potential overestimation of temperature extremes over these regions in MPI-GE, that may result from an overestimation of temperature variability over some continental areas (Fig. 2). However, the large ensemble size in MPI-GE allows for simulated low-probability extremes with return periods over hundreds of years, and the observational record may just be too short to determine whether the ensemble overestimates very extreme temperatures or whether the Time of Emergence (Hawkins and Sutton 2012) has not yet been reached for TXx over these regions.
For warming levels of \(1.5\,^\circ \hbox {C}\) and \(2\,^\circ \hbox {C}\), TXx remains mostly below \(50\,^\circ \hbox {C}\), with some exceptions in the Arabic Peninsula, Northern India and Pakistan; while the areas where TXx reaches \(45\,^\circ \hbox {C}\) to \(50\,^\circ \hbox {C}\) spread in comparison to pre-industrial conditions over North and West Africa (Fig. 4). In contrast, for \(3\,^\circ \hbox {C}\) and \(4\,^\circ \hbox {C}\) of global warming, TXx is projected to exceed \(50\,^\circ \hbox {C}\) across all continents (Fig. 4). By 4 °C of warming, MPI-GE projects the highest summer maximum temperatures over West Asia, surpassing the \(60\,^\circ \hbox {C}\) threshold over Pakistan, Iraq and Saudi Arabia. Whereas for absolute TXx hotspots occur over India, the Arabic Peninsula and the Western Sahara, hotspots of TXx increase relative to pre-industrial levels occur in MPI-GE projections in regions such as Central Europe and Central North and South America (SI Fig. S1), in agreement with the relative TXx increase hotspots highlighted in previous studies (Seneviratne et al. 2016; Lewis et al. 2019).
3.2 Return periods of very extreme temperatures
In this section we investigate how the frequency of events that are extreme under pre-industrial conditions changes with global warming. As reference we choose extreme maximum summertime temperatures that occur on average once every hundred years under pre-industrial conditions (1-in-100-years events; Fig. 5, top). Under warming, these temperature levels characteristic of 1-in-100-years events occur more frequently than once every hundred years, thus becoming 1-in-x-years events for increasing global warming levels. Already at \(1.5\,^\circ \hbox {C}\) of global warming, these 1-in-100-years events could occur every 10 to 25 years in most regions of the globe; while in North Africa, extreme temperatures between 40 to \(50\,^\circ \hbox {C}\) are projected to occur every one to two years (Fig. 5). At \(2\,^\circ \hbox {C}\) of warming, these extreme temperatures are projected to occur more often than every 10 years over most of the world; while at \(3\,^\circ \hbox {C}\) of warming, they are projected to occur every 2 to 5 years in most regions, and every year in East Asia, North Africa and North America. By the point global warming reaches \(4\,^\circ \hbox {C}\) above pre-industrial levels, these very extreme events could occur more often than every one to two years almost all over the world (Fig. 5).
3.3 Maximum temperature variability
In this section we evaluate the range of year-to-year variability in summer maximum temperatures under global warming. Under pre-industrial conditions, absolute TXx variability simulated by MPI-GE is larger on mid and high latitudes, particularly in the Northern Hemisphere, and smaller in tropical regions (Fig. 6, top). Pre-industrial TXx variability reaches values well above \(10\,^\circ \hbox {C}\) in regions such as Eastern India, central Eurasia and other mid-latitude continental interiors. Most equatorial and tropical regions exhibit lower pre-industrial TXx variability, ranging from below \(4\,^\circ \hbox {C}\) to around \(8\,^\circ \hbox {C}\).
For global warming of \(1.5\,^\circ \hbox {C}\) and \(2\,^\circ \hbox {C}\), the change in TXx variability is dominated by a relative increase. The relative TXx variability increase is similar for both warming levels and remains mostly under 50%, reaching its maximum values in Central South America, North America and India (Fig. 6). For warming beyond \(2\,^\circ \hbox {C}\), TXx variability increases in these regions by more than 50%. Apart from the exceptions of Australia and some parts of Africa and East Asia, where TXx variability does not change substantially, at \(4\,^\circ \hbox {C}\) of global warming we find a substantial increase in the variability of summer maximum temperatures in large continental areas all across the globe, with maximum relative increase well above 100% (Fig. 6). For regions that exhibit low pre-industrial TXx variability, such as Central South America, this doubling of variability results on absolute TXx variability mostly below \(8\,^\circ \hbox {C}\) at \(4\,^\circ \hbox {C}\) of global warming (not shown). However, in regions of larger pre-industrial TXx variability, the doubling in TXx variability translates in a range of maximum year-to-year variations of summer maximum temperatures of up to \(14\,^\circ \hbox {C}\) in North America or Central Europe, and up to \(18\,^\circ \hbox {C}\) in India (not shown).
In addition, we also find a decrease in TXx variability ranging from 10 to 35% at \(4\,^\circ \hbox {C}\), most prominent in Southern Europe, North America, and high latitude regions such as Greenland (Fig. 6). The variability decrease over high latitude regions is most likely dominated by ice melt. Over mid latitude regions, TXx variability decrease occurs in the vicinity of transition zones between dry and wet climates, and is accompanied by strong variability increases (e.g., Central Europe, North America, Central Africa). This may occur due to decreasing moisture variability caused by overall dryer conditions as the high moisture variability area in the transition zones shifts polewards. A decrease in the frequency of wetter-than-normal summers may reduce temperature variability in the lower tail of the distribution due to decreased evaporative cooling. These results stand in contrast to results from previous studies evaluating standard deviation changes in multi-model ensembles, that find a consistent increase in summertime monthly mean temperature variability over land under global warming, particularly in the Northern Hemisphere (Bathiany et al. 2018).
3.4 Sustained tropical night temperatures
In this section we evaluate the risk of sustained tropical night temperatures, expressed as minimum temperatures higher than the tropical night threshold of pre-industrial 95th percentile monthly minimum temperature at each grid cell for the entirety of the month. These sustained tropical night conditions correspond with monthly minimum temperatures above \(20\,^\circ \hbox {C}\) over most tropical regions and some mid-latitude areas in the pre-industrial climate, and with temperatures higher than \(32\,^\circ \hbox {C}\) over the Western Sahara, parts of India and parts of the Arabic Peninsula (Fig. 7, top). Already at \(1.5\,^\circ \hbox {C}\) of global warming, the probability of these extreme sustained tropical night conditions exceeds 25% over most of the world, and probabilities above 50% spread polewards at \(2\,^\circ \hbox {C}\) of global warming (Fig. 7, middle). At \(3\,^\circ \hbox {C}\) of global warming, MPI-GE projects these extreme tropical night temperatures to be sustained during half or more of the summer months over most regions; with some exceptions over Australia, India, the Sahel, and the high latitudes, where probabilities remain in the 10–50% range (Fig. 7, bottom). By \(4\,^\circ \hbox {C}\) of global warming, our findings show that temperatures are projected to surpass these extreme conditions during every hour in every summer month over vast regions, including South East Asia, the Maritime Continent, Central Africa, and Central North and South America (Fig. 7, bottom). To avert the risk of common-place summertime tropical night conditions sustained during 25% or more of the summer months is not possible over most of the world, even by limiting global to \(1.5\,^\circ \hbox {C}\) (Fig. 8).
3.5 Extreme wet bulb temperatures
In this section we evaluate how the combination of simultaneous high temperature and high humidity measured as monthly wet bulb temperature (W) changes under global warming. Under pre-industrial climate conditions in MPI-GE, monthly W reaches maximum values above \(26\,^\circ \hbox {C}\) over Northern India and Pakistan; while remaining below \(24\,^\circ \hbox {C}\) on the majority of the world (Fig. 9, top). Beyond \(1.5\,^\circ \hbox {C}\) of global warming, projections of maximum absolute monthly W above \(26\,^\circ \hbox {C}\) spread over Northern India and East Asia; while monthly W above \(24\,^\circ \hbox {C}\) are projected to occur across all continents (Fig. 9). At \(4\,^\circ \hbox {C}\) of global warming, maximum monthly W levels above \(26\,^\circ \hbox {C}\) could occur over large land fractions across all continents; while projections surpass the \(28\,^\circ \hbox {C}\) danger threshold for vulnerable individuals on average for an entire month over parts of East China, the Arabic Peninsula, Pakistan and Northern India (Fig. 9).
In addition, instantaneous W values could exceed these monthly values by several degrees. The maximum monthly W estimates of \(26\,^\circ \hbox {C}\) from MPI-GE under pre-industrial climates and under \(1.5\,^\circ \hbox {C}\) of global warming are indeed several degrees lower than current maximum instantaneous W observed estimates of \(31\,^\circ \hbox {C}\) (Sherwood and Huber 2010; Im et al. 2017). Furthermore, the differences between monthly mean and instantaneous values are particularly large over extreme W hotspots such as South East and West Asia (Sherwood and Huber 2010; Im et al. 2017). Over these regions, daily W estimates under RCP8.5 forcing are projected to exceed the fatal \(35\,^\circ \hbox {C}\) threshold by the end of the century (Im et al. 2017). This comparison indicates that our projections using monthly W estimates may be somewhat conservative. However, previous maximum daily or instantaneous W projections are based on ensembles much smaller than MPI-GE, thus with a smaller probability of capturing very extreme events. Therefore, comparisons based on larger ensembles may yield even larger differences between maximum daily and monthly W estimates. On the other hand, we find good agreement between the regions of largest W increase under warming in MPI-GE and in previous studies (Sherwood and Huber 2010; Im et al. 2017; Brouillet and Joussaume 2019). This indicates that, although our monthly W estimates may underestimate the risk of reaching harmful instantaneous W levels within a month, the good agreement on the regions of largest W increase supports our conclusions regarding which regions become major heat-stress hotspots due to the combination of extreme temperature and humidity in a warmer world.
Lastly, we calculate the maximum global warming level that allows us to avert the risk of extreme hot and humid conditions characterized by monthly mean W above \(26\,^\circ \hbox {C}\) (Fig. 10). These extreme W conditions, that occur rarely in the pre-industrial climate of MPI-GE, can be averted over most regions of the world by maintaining global warming below \(2\,^\circ \hbox {C}\) (99% confidence), with some exceptions over Northern India or East China. For warming levels higher than \(2\,^\circ \hbox {C}\), the risk of extreme W conditions spreads over large land fractions across almost all continents. At \(4\,^\circ \hbox {C}\) of global warming, extreme W conditions above \(26\,^\circ \hbox {C}\) spread not only over large low-latitude and tropical regions, but also over mid-latitude regions in North America, East Asia, and Australia. Our results show that limiting global warming to \(2\,^\circ \hbox {C}\) under pre-industrial conditions is vital to avoid the exposure over large non-adapted regions to the combination of extreme temperature and humidity, one of the factors that exacerbates heat stress the most.
4 Summary and conclusions
We identify global risk hotspots of extreme summertime heat for five different metrics under five different levels of global warming, based on the robust sampling of low-probability extremes in the 100-member MPI-GE, currently the largest ensemble from a comprehensive climate model. These warming levels reflect near-equilibrium states for the climates at \(0\,^\circ \hbox {C}\), \(1.5\,^\circ \hbox {C}\) and \(2\,^\circ \hbox {C}\) of global warming, and transient conditions for the climates at \(3\,^\circ \hbox {C}\) and \(4\,^\circ \hbox {C}\) of global warming. We determine the maximum global warming level for which the risk of extreme heat conditions can be averted, as opposed to which conditions are part of the irreducible range of possibilities for each warming level. While MPI-GE adequately simulates the pattern of observed maximum absolute temperatures; the absolute maximum temperatures under preindustrial conditions are over some regions larger than those observed at the current warming level of \(1\,^\circ \hbox {C}\). This may indicate that MPI-GE overestimates either average maximum temperatures or maximum temperature variability in some areas. However, due to the relatively short length of the observational record, this can also indicate that extreme temperatures with return periods as long as those simulated by MPI-GE have not yet been recorded over these regions.
MPI-GE projects that, for global warming levels below \(2\,^\circ \hbox {C}\), maximum absolute summer temperatures stay below \(50\,^\circ \hbox {C}\) over most of the world, with some exceptions over maximum temperature hotspots in the Arabic Peninsula, Northern India and Pakistan. However, for warming levels beyond \(2\,^\circ \hbox {C}\), this threshold is overshot in all continents, with projected temperatures above \(60\,^\circ \hbox {C}\) in hotspots over Pakistan, Iraq or Saudi Arabia. We find that very extreme events that occur on average once every 100 years under pre-industrial conditions are projected to occur every 10 to 25 years at \(1.5\,^\circ \hbox {C}\) of warming, and more often than once every 10 years at \(2\,^\circ \hbox {C}\). At \(4\,^\circ \hbox {C}\) of warming, these 1-in-100-years events are projected to happen every one to two years over most of the world.
Our results also show that maximum temperature variability changes substantially under warming in large regions of the globe. Summer maximum temperature variability increases relative to pre-industrial levels up to 50% under \(2\,^\circ \hbox {C}\) of global warming, mostly in Central South America and North America, Central Europe and India. At \(4\,^\circ \hbox {C}\) of global warming we find hotspots of large maximum temperature variability increase over large continental areas, with maximum relative increase well above 100%. This 100% increase translates into maximum year-to-year variations of maximum temperatures of up to \(14\,^\circ \hbox {C}\) in North America and Central Europe, and up to \(18\,^\circ \hbox {C}\) in India. For regions such as Australia and large parts of Africa and East Asia, maximum temperature variability does not change substantially under warming. For high latitude regions and parts of Southern Europe, North America and South Africa, maximum temperature variability decreases by 10–35% at \(4\,^\circ \hbox {C}\) of global warming. Our results stand in contrast to previous studies, that indicate a consistent and substantial increase in summertime monthly mean temperature variability with global warming, especially in the Northern Hemisphere (Bathiany et al. 2018).
We find that for warming levels of \(1.5\,^\circ \hbox {C}\) above pre-industrial conditions, heat stress could be substantially aggravated by common-place sustained tropical night temperatures over non-adapted regions that rarely experience these conditions in a pre-industrial climate. At \(4\,^\circ \hbox {C}\) of global warming, extreme tropical night conditions are projected to occur almost everywhere in the world during more than a quarter of the summer months; while being sustained for the entirety of every summer month in tropical night hotspots over South East Asia, the Maritime Continent, Central Africa, and Central North and South America. Similarly, hot and humid conditions with extreme monthly wet bulb temperatures above \(26\,^\circ \hbox {C}\), that occur very rarely under pre-industrial conditions, are projected to occur over hotspots in North India and China already by \(1.5\,^\circ \hbox {C}\) of global warming. At \(4\,^\circ \hbox {C}\) of warming, these extreme wet bulb temperatures are projected to spread across most tropical regions as well as over mid latitude regions such as North America, Australia and South Asia. Over hotspot areas in India, Pakistan, China and the Arabian Peninsula, the most extreme monthly wet bulb temperatures are projected to exceed the \(28\,^\circ \hbox {C}\) danger threshold for vulnerable individuals on average for entire months.
We assess by how much global warming increase above pre-industrial conditions must be limited in order to avert the risk of extreme heat in five different metrics, considering the irreducible range of possibilities at each level of warming defined by well-sampled internal variability. Based on large samples of low-probability extremes for each of these heat metrics, we identify major hotspots over different regions—from maximum summertime temperatures of \(60\,^\circ \hbox {C}\) over hotspots in the Persian Gulf, maximum temperature variability increase beyond 100% over India or North America, to hotspots of extreme hot and humid conditions over India and China. These different heat-stress hotspots highlight the different potential risks and related adaptation measures that are necessary over different regions. With time and within limits, our society, economy, ecosystems, and even our bodies, are able to adapt to a warmer mean climate state. However, chaotic low-probability deviations from these mean climate conditions in the form of extreme events challenge our range of adaptability, potentially to its limits.
References
Armstrong B, Sera F, Vicedo-Cabrera AM, Abrutzky R, Åström DO, Bell ML, Chen BY, de Sousa Zanotti Stagliorio Coelho M, Correa PM, Dang TN, Diaz MH, Dung DV, Forsberg B, Goodman P, Guo YLL, Guo Y, Hashizume M, Honda Y, Indermitte E, niguez CI, Kan H, Kim H, Kyselý J, Lavigne E, Michelozzi P, Orru H, Ortega NV, Pascal M, Ragettli MS, Saldiva PHN, Schwartz J, Scortichini M, Seposo X, Tobias A, Tong S, Urban A, la Cruz Valencia CD, Zanobetti A, Zeka A, Gasparrini A (2019) The role of humidity in associations of high temperature with mortality: A multicountry, multicity study. Environ Health Perspect 127(9):097007. https://doi.org/10.1289/EHP5430
Basu R, Samet JM (2002) Relation between elevated ambient temperature and mortality: a review of the epidemiologic evidence. Epidemiol Rev 24(2):190–202. https://doi.org/10.1093/epirev/mxf007
Bathiany S, Dakos V, Scheffer M, Lenton TM (2018) Climate models predict increasing temperature variability in poor countries. Sci Adv. https://doi.org/10.1126/sciadv.aar5809
Bittner M, Schmidt H, Timmreck C, Sienz F (2016) Using a large ensemble of simulations to assess the northern hemisphere stratospheric dynamical response to tropical volcanic eruptions and its uncertainty. Geophys Res Lett 43:9324–9332. https://doi.org/10.1002/2016GL070587
Bowman DMJS, Williamson GJ, Abatzoglou JT, Kolden CA, Cochrane MA, Smith AMS (2017) Human exposure and sensitivity to globally extreme wildfire events. Nat Ecol Evolut. https://doi.org/10.1038/s41559-016-0058
Brouillet A, Joussaume S (2019) Investigating the role of the relative humidity in the co-occurrence of temperature and heat stress extremes in CMIP5 projections. Geophys Res Lett 46(20):11435–11443. https://doi.org/10.1029/2019GL084156. https://agupubs.onlinelibrary.wiley.com/doi/abs/10.1029/2019GL084156
Buzan JR, Oleson K, Huber M (2015) Implementation and comparison of a suite of heat stress metrics within the community land model version 4.5. Geosci Model Dev 8(2):151–170. https://doi.org/10.5194/gmd-8-151-2015
Coffel ED, Horton RM, de Sherbinin A (2018) Temperature and humidity based projections of a rapid rise in global heat stress exposure during the 21st century. Environ Res Lett 13(1):014001. https://doi.org/10.1088/1748-9326/aaa00e
De Blois J, Kjellstrom T, Agewall S, Ezekowitz JA, Armstrong PW, Atar D (2015) The effects of climate change on cardiac health. Cardiology 131(4):209–217. https://doi.org/10.1159/000398787
Donat MG, Pitman AJ, Seneviratne SI (2017) Regional warming of hot extremes accelerated by surface energy fluxes. Geophys Res Lett 44(13):7011–7019. https://doi.org/10.1002/2017GL073733
Dunne JP, Stouffer RJ, John JG (2013) Reductions in labour capacity from heat stress under climate warming. Nat Clim Chang. https://doi.org/10.1038/nclimate1827
Fischer EM, Knutti R (2013) Robust projections of combined humidity and temperature extremes. Nat Clim Chang. https://doi.org/10.1038/nclimate1682
Fischer EM, Rajczak J, Schär C (2012) Changes in European summer temperature variability revisited. Geophys Res Lett. https://doi.org/10.1029/2012GL052730
Fischer EM, Beyerle U, Knutti R (2013) Robust spatially aggregated projections of climate extremes. Nat Clim Chang 3(12):1033–1038. https://doi.org/10.1038/nclimate2051
Flato GJ, Marotzke J, Abiodun B, Braconnot P, Chou SC, Collins W, Cox P, Driouech F, Emori S, Eyring V, Forest C, Gleckler P, Guilyardi E, Jakob C, Kattsov V et al (2013) Evaluation of climate models. In: Stocker TF, Qin D, Plattner G-K, Tignor M, Allen SK, Boschung J, Nauels A, Xia Y, Bex V, Midgley PM (eds) Climate change 2013: the physical science basis. Contribution of working group I to the fifth assessment report of the Intergovernmental panel on climate change. Cambridge University Press, Cambridge, pp 741–866. https://doi.org/10.1017/CBO9781107415324.020
Gasparrini A, Guo Y, Sera F, Vicedo-Cabrera AM, Huber V, Tong S, de Sousa Zanotti Stagliorio Coelho M, Nascimento Saldiva PH, Lavigne E, Matus Correa P, Valdes Ortega N, Kan H, Osorio S, Kyselý J, Urban A, Jaakkola JJK, Ryti NRI, Pascal M, Goodman PG, Zeka A, Michelozzi P, Scortichini M, Hashizume M, Honda Y, Hurtado-Diaz M, Cesar Cruz J, Seposo X, Kim H, Tobias A, Íñiguez C, Forsberg B, Åström DO, Ragettli MS, Guo YL, Wu C, Zanobetti A, Schwartz J, Bell ML, Dang TN, Van DD, Heaviside C, Vardoulakis S, Hajat S, Haines A, Armstrong B, (2017) Projections of temperature-related excess mortality under climate change scenarios. Lancet Plant Health 1(9):e360–e367. https://doi.org/10.1016/S2542-5196(17)30156-0
Giorgetta MA, Jungclaus J, Reick CH, Legutke S, Bader J, Bottinger M, Brovkin V, Crueger T, Esch M, Fieg K et al (2013) Climate and carbon cycle changes from 1850 to 2100 in MPI-ESM simulations for the Coupled Model Intercomparison Project phase 5. JAMES 5:572–597. https://doi.org/10.1002/jame.20038
Gourdji SM, Sibley AM, Lobell DB (2013) Global crop exposure to critical high temperatures in the reproductive period: historical trends and future projections. Environ Res Lett 8(2):024041. https://doi.org/10.1088/1748-9326/8/2/024041
Gregory JM, Andrews T, Good P (2015) The inconstancy of the transient climate response parameter under increasing \(\text{ CO}_2\). Philos Trans R Soc A Math Phys Eng Sci 373(2054):20140417. https://doi.org/10.1098/rsta.2014.0417
Guo Y, Gasparrini A, Armstrong BG, Tawatsupa B, Tobias A, Lavigne E, de Sousa Zanotti Stagliorio Coelho M, Pan X, Kim H, Hashizume M, Honda Y, Guo YLL, Wu CF, Zanobetti A, Schwartz JD, Bell ML, Scortichini M, Michelozzi P, Punnasiri K, Li S, Tian L, Garcia SDO, Seposo X, Overcenco A, Zeka A, Goodman P, Dang TN, Dung DV, Mayvaneh F, Saldiva PHN, Williams G, Tong S, (2017) Heat wave and mortality: a multicountry, multicommunity study. Environ Health Perspect 125(8):087006. https://doi.org/10.1289/EHP1026
Harrington LJ, Frame DJ, Fischer EM, Hawkins E, Joshi M, Jones CD (2016) Poorest countries experience earlier anthropogenic emergence of daily temperature extremes. Environ Res Lett 11(5):055007. https://doi.org/10.1088/1748-9326/11/5/055007
Hawkins E, Sutton RT (2012) Time of emergence of climate signals. Geophys Res Lett. https://doi.org/10.1029/2011GL050087
Hawkins E, Ortega P, Suckling E, Schurer A, Hegerl G, Jones P, Joshi M, Osborn T, Masson-Delmotte V, Mignot J, Thorne P, van Oldenborgh G (2017) Estimating changes in global temperature since the preindustrial period. BAMS 98(9):1841–1856. https://doi.org/10.1175/BAMS-D-16-0007.1
Im ES, Pal JS, Eltahir EAB (2017) Deadly heat waves projected in the densely populated agricultural regions of South Asia. Sci Adv. https://doi.org/10.1126/sciadv.1603322
IPCC (2013) Summary for policymakers climate change 2013: the physical science basis. In: Stocker TF et al (eds) IPCC, Cambridge Univ Press, Cambridge, pp 571–657
IPCC (2014) Climate change 2014: impacts, adaptation, and vulnerability. Part A: global and sectoral aspects. Contribution of working group II to the fifth assessment report of the intergovernmental panel on climate change. In: Field CB, Barros VR, Dokken DJ, Mach KJ, Mastrandrea MD, Bilir TE, Chatterjee M, Ebi KI, Estrada YO, Genova RC, Girma B, Kissel ES, Levy AN, Maccracken S, Mastrandrea PR, White ll (eds), Cambridge University Press, Cambridge, p 1132
James R, Washington R, Schleussner CF, Rogelj J (2017) Characterizing half-a-degree difference: a review of methods for identifying regional climate responses to global warming targets. WIREs Clim Chang 8(8):e457. https://doi.org/10.1002/wcc.457
Jungclaus JH, Fischer N, Haak H, Lohmann K, Marotzke J, Matei D, Mikolajewicz U, Notz D, von Storch JS (2013) Characteristics of the ocean simulations in the Max Planck Institute Ocean Model (MPIOM) the ocean component of the MPI-Earth system model. JAMES 5(2):422–446. https://doi.org/10.1002/jame.20023
King AD, Harrington LJ (2018) The inequality of climate change from 1.5 to \(2^{\circ }\text{ C }\) of global warming. Geophys Res Lett 45(10):5030–5033. https://doi.org/10.1029/2018GL078430
King AD, Karoly D (2017) Climate extremes in Europe at 1.5 and 2 degrees of global warming. Environ Res Lett. https://doi.org/10.1088/1748-9326/aa8e2c
King AD, Lane TP, Henley BJ, Brown JR (2020) Global and regional impacts differ between transient and equilibrium warmer worlds. Nat Clim Chang 10(1):42–47. https://doi.org/10.1038/s41558-019-0658-7
Kjellstrom T, Butler AJ, Lucas RM, Bonita R (2010) Public health impact of global heating due to climate change: potential effects on chronic non-communicable diseases. Int J Public Health 55(2):97–103. https://doi.org/10.1007/s00038-009-0090-2
Laaidi K, Zeghnoun A, Dousset B, Bretin P, Vandentorren S, Giraudet E, Beaudeau P (2012) The impact of heat islands on mortality in paris during the august 2003 heat wave. Environ Health Perspect 120(2):254–259. https://doi.org/10.1289/ehp.1103532
Lee JY, Kim H, Gasparrini A, Armstrong B, Bell ML, Sera F, Lavigne E, Abrutzky R, Tong S, de Sousa Zanotti Stagliorio Coelho M, Saldiva PHN, Correa PM, Ortega NV, Kan H, Garcia SO, Kyselý J, Urban A, Orru H, Indermitte E, Jaakkola JJ, Ryti NR, Pascal M, Goodman PG, Zeka A, Michelozzi P, Scortichini M, Hashizume M, Honda Y, Hurtado M, Cruz J, Seposo X, Nunes B, ao Paulo Teixeira J, Tobias A, niguez CI, Forsberg B, Åström C, Vicedo-Cabrera AM, Ragettli MS, Guo YLL, Chen BY, Zanobetti A, Schwartz J, Dang TN, Van DD, Mayvaneh F, Overcenco A, Li S, Guo Y, (2019) Predicted temperature-increase-induced global health burden and its regional variability. Environ Int 131:105027. https://doi.org/10.1016/j.envint.2019.105027
Lewis SC, King AD, Perkins-Kirkpatrick SE, Mitchell DM (2019) Regional hotspots of temperature extremes under \(1.5^{\circ }\text{ C }\) and \(2^{\circ }\text{ C }\) of global mean warming. Weather Clim Extremes 26:100233. https://doi.org/10.1016/j.wace.2019.100233. http://www.sciencedirect.com/science/article/pii/S2212094719300556
Li J, Chen YD, Gan TY, Lau NC (2018) Elevated increases in human-perceived temperature under climate warming. Nat Clim Chang 8(1):43–47. https://doi.org/10.1038/s41558-017-0036-2
Maher N, Milinski S, Suarez-Gutierrez L, Botzet M, Dobrynin M, Kornblueh L, Kröger J, Takano Y, Ghosh R, Hedemann C, Li C, Li H, Manzini E, Notz D, Putrasahan D, Boysen L, Claussen M, Ilyina T, Olonscheck D, Raddatz T, Stevens B, Marotzke J (2019) The Max Planck Institute Grand Ensemble: enabling the exploration of climate system variability. JAMES 11(7):2050–2069. https://doi.org/10.1029/2019MS001639
Mahlstein I, Knutti R, Solomon S, Portmann RW (2011) Early onset of significant local warming in low latitude countries. Environ Res Lett 6(3):034009. https://doi.org/10.1088/1748-9326/6/3/034009
Matthews TKR, Wilby RL, Murphy C (2017) Communicating the deadly consequences of global warming for human heat stress. Proc Natl Acad Sci. https://doi.org/10.1073/pnas.1617526114
Mauritsen T, Bader J, Becker T, Behrens J, Bittner M, Brokopf R, Brovkin V, Claussen M, Crueger T, Esch M, Fast I, Fiedler S, Fläschner D, Gayler V, Giorgetta M, Goll DS, Haak H, Hagemann S, Hedemann C, Hohenegger C, Ilyina T, Jahns T, Jimenez de la Cuesta Otero D, Jungclaus J, Kleinen T, Kloster S, Kracher D, Kinne S, Kleberg D, Lasslop G, Kornblueh L, Marotzke J, Matei D, Meraner K, Mikolajewicz U, Modali K, Möbis B, Müller WA, Nabel JEMS, Nam CCW, Notz D, Nyawira SS, Paulsen H, Peters K, Pincus R, Pohlmann H, Pongratz J, Popp M, Raddatz T, Rast S, Redler R, Reick CH, Rohrschneider T, Schemann V, Schmidt H, Schnur R, Schulzweida U, Six KD, Stein L, Stemmler I, Stevens B, von Storch JS, Tian F, Voigt A, de Vrese P, Wieners KH, Wilkenskjeld S, Winkler A, Roeckner E (2019) Developments in the MPI-M Earth System Model version 1.2 (mpi-esm 1.2) and its response to increasing CO2. JAMES https://doi.org/10.1029/2018MS001400
Meehl GA, Tebaldi C (2004) More intense, more frequent, and longer lasting heat waves in the 21st century. Science 305(5686):994–997. https://doi.org/10.1126/science.1098704
Mishra V, Mukherjee S, Kumar R, Stone DA (2017) Heat wave exposure in India in current, \(1.5^{\circ }\text{ C }\), and \(2.0^{\circ }\text{ C }\) worlds. Environ Res Lett 12(12):124012. https://doi.org/10.1088/1748-9326/aa9388
Mitchell D, Heaviside C, Vardoulakis S, Huntingford C, Masato G, Guillod BP, Frumhoff P, Bowery A, Wallom D, Allen M (2016) Attributing human mortality during extreme heat waves to anthropogenic climate change. Environ Res Lett 11(7):074006. https://doi.org/10.1088/1748-9326/11/7/074006
Mora C, Dousset B, Caldwell IR, Powell FE, Geronimo RC, Bielecki CR, Counsell CWW, Dietrich BS, Johnston ET, Louis LV, Lucas MP, McKenzie MM, Shea AG, Tseng H, Giambelluca TW, Leon LR, Hawkins E, Trauernicht C (2017) Global risk of deadly heat. Nat Clim Chang 7:501. https://doi.org/10.1038/nclimate3322
Murage P, Hajat S, Kovats RS (2017) Effect of night-time temperatures on cause and age-specific mortality in London. Environ Epidemiol. https://doi.org/10.1097/EE9.0000000000000005
Newth D, Gunasekera D (2018) Projected changes in wet-bulb globe temperature under alternative climate scenarios. Atmosphere 9(5):187. https://doi.org/10.3390/atmos9050187
Pal JS, Eltahir EAB (2015) Future temperature in southwest Asia projected to exceed a threshold for human adaptability. Nat Clim Change. https://doi.org/10.1038/nclimate2833
Robine JM, Cheung SLK, Roy SL, Oyen HV, Griffiths C, Michel JP, Herrmann FR (2008) Death toll exceeded 70,000 in europe during the summer of 2003. CR Biol 331(2):171–178. https://doi.org/10.1016/j.crvi.2007.12.001
Rogelj J, Schleussner CF, Hare W (2017) Getting it right matters: temperature goal interpretations in geoscience research. Geophys Res Lett 44(20):10,662–10,665. https://doi.org/10.1002/2017GL075612. https://agupubs.onlinelibrary.wiley.com/doi/abs/10.1002/2017GL075612
Rohde R, Muller R, Jacobsen R, Muller E, Perlmutter S, Rosenfeld A, Wurtele J, Groom D, Wickham C (2012) A new estimate of the average earth surface land temperature spanning 1753 to 2011. Geoinf Geostat Overview 1:1. https://doi.org/10.4172/2327-4581.1000101
Royé D (2017) The effects of hot nights on mortality in Barcelona, Spain. Int J Biometeorol 61(12):2127–2140. https://doi.org/10.1007/s00484-017-1416-z
Rugenstein M, Bloch-Johnson J, Abe-Ouchi A, Andrews T, Beyerle U, Cao L, Chadha T, Danabasoglu G, Dufresne JL, Duan L, Foujols MA, Frölicher T, Geoffroy O, Gregory J, Knutti R, Li C, Marzocchi A, Mauritsen T, Menary M, Moyer E, Nazarenko L, Paynter D, Saint-Martin D, Schmidt GA, Yamamoto A, Yang S (2019) Longrunmip: motivation and design for a large collection of millennial-length aogcm simulations. BAMS 100(12):2551–2570. https://doi.org/10.1175/BAMS-D-19-0068.1
Russo S, Sterl A (2011) Global changes in indices describing moderate temperature extremes from the daily output of a climate model. J Geophys Res Atmos. https://doi.org/10.1029/2010JD014727
Russo S, Sillmann J, Sterl A (2017) Humid heat waves at different warming levels. Sci Rep 7(1):7477. https://doi.org/10.1038/s41598-017-07536-7
Russo S, Sillmann J, Sippel S, Barcikowska MJ, Ghisetti C, Smid M, O’Neill B (2019) Half a degree and rapid socioeconomic development matter for heatwave risk. Nat Commun 10(1):136. https://doi.org/10.1038/s41467-018-08070-4
Samset B, Stjern C, Lund M, Mohr C, Sand M, Daloz A (2019) How daily temperature and precipitation distributions evolve with global surface temperature. Earth Fut. https://doi.org/10.1029/2019EF001160
Schaller N, Sillmann J, Anstey J, Fischer EM, Grams CM, Russo S (2018) Influence of blocking on northern european and western russian heatwaves in large climate model ensembles. Environ Res Lett 13(5):054015. https://doi.org/10.1088/1748-9326/aaba55
Schleussner CF, Lissner TK, Fischer EM, Wohland J, Perrette M, Golly A, Rogelj J, Childers K, Schewe J, Frieler K, Mengel M, Hare W, Schaeffer M (2016) Differential climate impacts for policy-relevant limits to global warming: the case of \(1.5^\circ \text{ }\) and \(2^\circ \text{ C }\). Earth Syst Dyn 7(2):327–351. https://doi.org/10.5194/esd-7-327-2016
Seneviratne SI, Donat MG, Pitman AJ, Knutti R, Wilby RL (2016) Allowable CO2 emissions based on regional and impact-related climate targets. Nature 529(7587):477–483
Sherwood SC, Huber M (2010) An adaptability limit to climate change due to heat stress. Proc Natl Acad Sci 107(21):9552–9555. https://doi.org/10.1073/pnas.0913352107
Stull R (2011) Wet-bulb temperature from relative humidity and air temperature. J Appl Meteorol Climatol 50(11):2267–2269. https://doi.org/10.1175/JAMC-D-11-0143.1
Suarez-Gutierrez L, Li C, Thorne PW, Marotzke J (2017) Internal variability in simulated and observed tropical tropospheric temperature trends. Geophys Res Lett 44:5709–5719. https://doi.org/10.1002/2017GL073798
Suarez-Gutierrez L, Li C, Müller WA, Marotzke J (2018) Internal variability in european summer temperatures at \(1.5^{\circ }\text{ C }\) and \(2^{\circ }\text{ C }\) of global warming. Environ Res Lett 44:5709–5719. https://doi.org/10.1002/2017GL073798
Suarez-Gutierrez L, Li C, Müller WA, Marotzke J (2020) Dynamical and thermodynamical drivers of variability in European summer heat extremes. Clim Dyn. https://doi.org/10.1007/s00382-020-05233-2
Taylor KE, Stouffer RJ, Meehl GA (2012) An overview of CMIP5 and the experiment design. Bull Am Meteorol Soc 93:485–498. https://doi.org/10.1175/BAMS-D-11-00094.1
Tebaldi C, Knutti R (2018) Evaluating the accuracy of climate change pattern emulation for low warming targets. Environ Res Let 13(5):055006. https://doi.org/10.1088/1748-9326/aabef2
Vicedo-Cabrera AM, Sera F, Guo Y, Chung Y, Arbuthnott K, Tong S, Tobias A, Lavigne E, de Sousa Zanotti Stagliorio Coelho M, Saldiva PHN, Goodman PG, Zeka A, Hashizume M, Honda Y, Kim H, Ragettli MS, Röösli M, Zanobetti A, Schwartz J, Armstrong B, Gasparrini A (2018) A multi-country analysis on potential adaptive mechanisms to cold and heat in a changing climate. Environ Int 111:239–246. https://doi.org/10.1016/j.envint.2017.11.006. http://www.sciencedirect.com/science/article/pii/S0160412017310346
Wehner M, Stone D, Krishnan H, AchutaRao K, Castillo F (2016) The deadly combination of heat and humidity in India and Pakistan in summer 2015. Bull Am Meteorol Soc 97(12):S81–S86. https://doi.org/10.1175/BAMS-D-16-0145.1
Willett KM, Sherwood SC (2012) Exceedance of heat index thresholds for 15 regions under a warming climate using the wet-bulb globe temperature. Int J Climatol 32(2):161–177. https://doi.org/10.1002/joc.2257
Acknowledgements
Open access funding provided by Projekt DEAL. This research was supported by the Max Planck Society for the Advancement of Science and by the German Ministry of Education and Research (BMBF) under the MiKlip project FLEXFORDEC (Grant number 01LP1519A) and under the ClimXtreme project DecHeat (Grant number 01LP1901F). C.L. acknowledges funding from Clusters of Excellence CLICCS (EXC2037), University Hamburg, funded through the German Research Foundation (DFG). We acknowledge Luis Kornblueh, Jürgen Kröger, Michael Botzet, Yohei Takano, Sebastian Milinski, and Nicola Maher for producing and processing the historical, RCP2.6, RCP4.5, and RCP8.5 MPI-ESM Grand Ensemble simulations, and the Swiss National Computing Centre (CSCS) and the German Climate Computing Center (DKRZ) for providing the necessary computational resources. We would also like to acknowledge Berkeley Earth Laboratory for developing and facilitating the Berkeley Earth Surface Temperature observational compilations used in our study. We thank Andreas Lang and two anonymous reviewers for their insightful comments and suggestions. Further information on the simulation details and how to download MPI-GE output can be found here: https://www.mpimet.mpg.de/en/grand-ensemble/. Scripts used in the analysis and other supporting information that may be useful in reproducing the authors work are archived by the Max Planck Institute for Meteorology and publicly available by contacting publications@mpimet.mpg.de.
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Electronic supplementary material
Below is the link to the electronic supplementary material.
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Suarez-Gutierrez, L., Müller, W.A., Li, C. et al. Hotspots of extreme heat under global warming. Clim Dyn 55, 429–447 (2020). https://doi.org/10.1007/s00382-020-05263-w
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00382-020-05263-w