Abstract
The paper presents a methodology for modeling profile of two circular-arc cams, which is based on the application of homogeneous coordinate transformation method. Analytical expressions that allow complete determining of all design parameters and coordinates of all the points of two circular-arc cams profile are defined. Also, analytical expressions for determining the kinematic performance such as displacement, velocity, acceleration and jerk are derived. The defined methodology is applied on concrete examples for which the analysis of the kinematic performance is also performed. Additionally, it is shown that a proper choice of the design parameters can significantly affect the improvement of the kinematic performance, especially the reduction of jerk as one of the most unfavorable occurrences in these mechanisms. The given methodology allows very efficient determination of all input data for parametric modeling and production of two circular-arc cams on numerical machines. This approach allows the fulfillment of one of the most important requirements of modern production–reduction of time necessary for design and manufacturing which causes reduction of costs.
Similar content being viewed by others
References
Chen FY (1982) Mechanics and design of cam mechanisms. Pergamon Press, New York
Rothbart HA (2004) Cam design handbook. McGraw-Hill, New York City
Chen FY (1977) A survey of the state of the art of cam system dynamics. Mech Mach Theory 12:201–224
Chironis NP (1991) Mechanisms and mechanical devices sourcebook. McGraw-Hill, New York
Magnani PL, Ruggieri G (1986) Meccanismi per macchine automatiche. UTET, Torino (in Italian)
Scotto LG (1971) In: Sistema (ed) Applicazioni di Meccanica Applicata alle Macchine. Roma
Lanni C, Ceccarelli M, Figliolini G (2002) An analytical design for three circular-arc cams. Mech Mach Theory 37:915–924
Hsieh Jung-Fa (2010) Design and analysis of cams with three circular-arc profiles. Mech Mach Theory 45:955–965
Lanni C, Ceccarelli M, Mendes Carvalho JC (2001) An analytical formulation for two circular-arc cams. CSME Trans Mech Eng 25(1):29–49
Chang Wen-Tung, Long-Iong Wu (2009) Computerized tolerance analysis of disk cam mechanisms with a roller follower. Eng Comput 25:247–260. doi:10.1007/s00366-008-0121-2
Lanni C, Ceccarelli M, Greco G (2004) An experimental characterization of cam profiles with three circular-arc profiles. Int J Gear Trans 2:49–60
Acknowledgments
The authors wish to express their gratitude to Serbian Ministry of Science and Technology for supporting this paper through project TR35038.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Bižić, M., Bulatović, R., Petrović, D. et al. Modeling profile and kinematic analysis of two circular-arc cams. Engineering with Computers 29, 535–546 (2013). https://doi.org/10.1007/s00366-012-0280-z
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00366-012-0280-z