Abstract
A mixed model, numerical-analytical, is presented that allows one to predict the elastic properties of carbon nanotube (CNT)/polymer composites containing a random distribution of CNTs, while taking account of the curvature that they show when immersed in the polymer. This hybrid approach is a significant advance over micromechanical modeling and can be applied to all nanostructured composites.
Similar content being viewed by others
References
J.N. Coleman, U. Khan, W.J. Blau, Y.K. Gun’ko, Carbon 44, 1624–1652 (2006)
M. Moniruzzaman, K.I. Winey, Macromolecules 39, 5194–5205 (2006)
O. Breuer, U. Sundararaj, Polym. Compos. 25(6), 630–645 (2004)
D. Qian, E.C. Dickey, R. Andrews, T. Rantell, Appl. Phys. Lett. 76, 2868–2870 (2000)
R. Andrews, D. Jacques, M. Minot, T. Rantell, Macromol. Mater. Eng. 287, 395–403 (2002)
H. Xia, Q. Wang, K. Li, G.H. Hu, J. Appl. Polymer Sci. 93, 378–386 (2004)
Y.S. Song, J.R. Youn, Carbon 43, 1378–1385 (2005)
G.M. Odegard, T.S. Gates, K.E. Wise, C. Park, E.J. Siochi, Compos. Sci. Technol. 63, 1671–1687 (2003)
F.T. Fisher, R.D. Bradshaw, L.C. Brinson, Compos. Sci. Technol. 63, 1689–1703 (2003)
R.D. Bradshaw, F.T. Fisher, L.C. Brinson, Compos. Sci. Technol. 63, 1705–1722 (2003)
D. Shi, X. Feng, Y. Huang, K. Hwang, H. Gao, J. Eng. Mater. Technol. 126, 250–257 (2004)
S.J.V. Frankland, A. Caglar, D.W. Brenner, M. Griebel, J. Phys. Chem. B 106, 3046–3048 (2002)
A. Pantano, F. Cappello, Mecc., Int. J. Theor. Appl. Mech. 43, 263–270 (2008)
A. Pantano, G. Modica, F. Cappello, Mater. Sci. Eng. A 486, 222–227 (2008)
M. Garg, A. Pantano, M.C. Boyce, J. Eng. Mater. Technol. 129, 431–439 (2007)
A. Pantano, D.M. Parks, M.C. Boyce, Phys. Rev. Lett. 91, 145504 (2003)
A. Pantano, M.C. Boyce, D.M. Parks, J. Mech. Phys. Solids 52, 789–821 (2004)
A. Pantano, M.C. Boyce, D.M. Parks, Trans. ASME, J. Eng. Mater. Technol. 126, 279–284 (2004)
A. Pantano, D.M. Parks, M.C. Boyce, M. Buongiorno Nardelli, J. Appl. Phys. 92, 6756–6760 (2004)
T. Mori, K. Tanaka, Acta Metall. 21, 571–574 (1973)
Y. Benveniste, Mech. Mater. 6, 147 (1987)
G.J. Weng, J. Eng. Sci. 28, 1111–1120 (1990)
J. Schjodt-Thomsen, R. Pyrz, Mech. Mater. 33, 531–544 (2001)
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Pantano, A., Mantione, P. A numerical-analytical model for the characterization of composites reinforced by carbon nanotubes. Appl. Phys. A 99, 895–902 (2010). https://doi.org/10.1007/s00339-010-5635-y
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00339-010-5635-y