Summary
The use of a thermosensitive porous gel for dewatering organic slurries was investigated. The gel was synthesized from N-isopropylacrylamide (NIPAM), the monomer and N,N’-methylenebisacrylamide (MBAA), a crosslinker. A porous gel was produced by simple radical polymerization at higher temperature than the LCST (Lower Critical Solution Temperature) of the N-isopropylacrylamide polymer. At such a high temperature, phase separation occurs as polymerization proceeds, and a porous structure is formed. The thermosensitive porous gel, which was supported by stainless steel wire, was prepared and the effect of preparation conditions such as the concentration of crosslinker and monomer used on the dewatering performance of the gel was examined. The effects of these parameters on gel structure and the relationship between gel structure and absorption rates were also examined.
Similar content being viewed by others
References
Freitas RFS, Cussler EL (1987) Sep Sci Technol 22:911
Trank SJ, Johnson DW, Cussler EL (1989) Food Technol 6:78
Sassi AP, Shaw AJ, Han, SM, Blanch HW, Prausnitz JM (1996) Polymer 37:2151
Hirasa O (1986) Kobunshi 35:1100
Kishi R, Hirasa O, Ichijo H (1997) Polym Gels Networks 5:145
Huang X, Akehata T, Unno H, Hirasa O (1988) J Chem Eng Jpn 21:10
Huang X, Akehata T, Unno H, Hirasa O (1988) J Chem Eng Jpn 21:651
Huang X, Akehata T, Unno H, Hirasa O (1989) Biotechnol Bioeng 34:102
Akehata T, Mochizuki M, Kawakami T, Hayashi A (1996) Preprints of the 29thAutumn Meetings of the Society of Chemical Engineers, Japan 2:164 (in Japanese)
Kabra BG, Gehrike SH (1991) Polym Commun 32:322
Wu XS, Hoffman AS, Yager P (1992) Polym Sci A 30:2121
Gotoh T, Nakatani Y, Sakohara S (1998) J Appl Polym Sci 69:895
Gotoh T, Okamoto H, Sakohara S (2004) J Chem Eng Jpn 37:597
Tanaka T (1981) Sci Am 1:124
Flory PJ (1953) Principles of Polymer Chemistry Cornell Univ Press, New York
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Gotoh, T., Okamoto, H. & Sakohara, S. Dewatering of organic slurries using reinforced thermosensitive porous gels. Polym. Bull. 58, 213–223 (2007). https://doi.org/10.1007/s00289-006-0618-z
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00289-006-0618-z