Abstract
Highly cross-linked ultrahigh molecular weight polyethylene (UHMWPE) was introduced to decrease wear debris and osteolysis. During cross-linking, free radicals are formed, making highly cross-linked polyethylene vulnerable to oxidative degradation. In order to reduce this process, anti-oxidant vitamin E can be incorporated in polyethylene. This review provides an overview of the effects of vitamin E incorporation on major complications in total joint arthroplasty: material failure due to oxidative degradation, wear debris and subsequent periprosthetic osteolysis, and prosthetic joint infections. Secondly, this review summarizes the first clinical results of total hip and knee arthroplasties with vitamin E incorporated highly cross-linked polyethylene. Based on in vitro studies, incorporation of vitamin E in polyethylene provides good oxidative protection and preserves low wear rates. Incorporation of vitamin E may have the beneficial effect of reduced inflammatory response to its wear particles. Some microorganisms showed reduced adherence to vitamin E–incorporated UHMWPE; however, clinical relevance is doubtful. Short-term clinical studies of total hip and knee arthroplasties with vitamin E–incorporated highly cross-linked UHMWPE reported good clinical results and wear rates similar to highly cross-linked UHMWPE without vitamin E.
Similar content being viewed by others
References
Heckmann ND, Sivasundaram L, Stefl MD, Kang HP, Basler ET, Lieberman JR (2018) Total hip arthroplasty bearing surface trends in the United States from 2007 to 2014: the rise of ceramic on polyethylene. J Arthroplast 33(6):1757–1763.e1. https://doi.org/10.1016/j.arth.2017.12.040
Nguyen LC, Lehil MS, Bozic KJ (2014) Trends in total knee arthroplasty implant utilization. J Arthroplast 30:739–742. https://doi.org/10.1016/j.arth.2014.12.009
Purdue PE, Koulouvaris P, Nestor BJ, Sculco TP (2006) The central role of wear debris in periprosthetic osteolysis. HSS J 2:102–113. https://doi.org/10.1007/s11420-006-9003-6
McKellop H, Shen FW, Lu B, Campbell P, Salovey R (2000) Effect of sterilization method and other modifications on the wear resistance of acetabular cups made of ultra-high molecular weight polyethylene. A hip-simulator study. J Bone Joint Surg Am 82-A:1708–1725
Bragdon CR, Doerner M, Martell J, Jarrett B, Palm H, Multicenter Study Group, Malchau H (2013) The 2012 John Charnley Award: clinical multicenter studies of the wear performance of highly crosslinked remelted polyethylene in THA. Clin Orthop Relat Res 471:393–402. https://doi.org/10.1007/s11999-012-2604-0
McCalden RW, MacDonald SJ, Rorabeck CH, Bourne RB, Chess DG, Charron KD (2009) Wear rate of highly cross-linked polyethylene in total hip arthroplasty. A randomized controlled trial. J Bone Joint Surg Am 91:773–782. https://doi.org/10.2106/JBJS.H.00244
Thomas GE, Simpson DJ, Mehmood S, Taylor A, McLardy-Smith P, Gill HS, Murray DW, Glyn-Jones S (2011) The seven-year wear of highly cross-linked polyethylene in total hip arthroplasty: a double-blind, randomized controlled trial using radiostereometric analysis. J Bone Joint Surg Am 93:716–722. https://doi.org/10.2106/JBJS.J.00287
Kurtz SM (2009) UHMWPE biomaterials handbook. Elsevier, London
Gomez-Barrena E, Puertolas JA, Munuera L, Konttinen YT (2008) Update on UHMWPE research: from the bench to the bedside. Acta Orthop 79:832–840. https://doi.org/10.1080/17453670810016939
Grupp TM, Holderied M, Mulliez MA, Streller R, Jager M, Blomer W, Utzschneider S (2014) Biotribology of a vitamin E-stabilized polyethylene for hip arthroplasty - influence of artificial ageing and third-body particles on wear. Acta Biomater 10:3068–3078. https://doi.org/10.1016/j.actbio.2014.02.052
Gascoyne TC, Petrak MJ, Turgeon TR, Bohm ER (2014) Wear of a sequentially annealed polyethylene acetabular liner. Acta Orthop 85:470–473. https://doi.org/10.3109/17453674.2014.949044
Kurtz SM, Manley M, Wang A, Taylor S, Dumbleton J (2002) Comparison of the properties of annealed crosslinked (crossfire) and conventional polyethylene as hip bearing materials. Bull Hosp Jt Dis 61:17–26
Oral E, Muratoglu OK (2011) Vitamin E diffused, highly crosslinked UHMWPE: a review. Int Orthop 35:215–223. https://doi.org/10.1007/s00264-010-1161-y
Currier BH, Currier JH, Mayor MB, Lyford KA, Collier JP, Van Citters DW (2007) Evaluation of oxidation and fatigue damage of retrieved crossfire polyethylene acetabular cups. J Bone Joint Surg Am 89:2023–2029
Kurtz SM, Austin MS, Azzam K, Sharkey PF, MacDonald DW, Medel FJ, Hozack WJ (2010) Mechanical properties, oxidation, and clinical performance of retrieved highly cross-linked crossfire liners after intermediate-term implantation. J Arthroplast 25:614–623.e1–2. https://doi.org/10.1016/j.arth.2009.04.022
Wannomae KK, Bhattacharyya S, Freiberg A, Estok D, Harris WH, Muratoglu O (2006) In vivo oxidation of retrieved cross-linked ultra-high-molecular-weight polyethylene acetabular components with residual free radicals. J Arthroplast 21:1005–1011. https://doi.org/10.1016/j.arth.2005.07.019
Oral E, Malhi AS, Muratoglu OK (2006) Mechanisms of decrease in fatigue crack propagation resistance in irradiated and melted UHMWPE. Biomaterials 27:917–925. https://doi.org/10.1016/j.biomaterials.2005.06.025
Oral E, Rowell SL, Muratoglu OK (2006) The effect of alpha-tocopherol on the oxidation and free radical decay in irradiated UHMWPE. Biomaterials 27:5580–5587. https://doi.org/10.1016/j.biomaterials.2006.07.017
Laura AD, Hothi H, Battisti C, Cerquiglini A, Henckel J, Skinner J, Hart A (2017) Wear of dual-mobility cups: a review article. Int Orthop 41:625–633. https://doi.org/10.1007/s00264-016-3326-9
Malatray M, Roux JP, Gunst S, Pibarot V, Wegrzyn J (2017) Highly crosslinked polyethylene: a safe alternative to conventional polyethylene for dual mobility cup mobile component. A biomechanical validation Int Orthop 41:507–512. https://doi.org/10.1007/s00264-016-3334-9
Oral E, Godleski Beckos C, Malhi AS, Muratoglu OK (2008) The effects of high dose irradiation on the cross-linking of vitamin E-blended ultrahigh molecular weight polyethylene. Biomaterials 29:3557–3560. https://doi.org/10.1016/j.biomaterials.2008.05.004
Parth M, Aust N, Lederer K (2002) Studies on the effect of electron beam radiation on the molecular structure of ultra-high molecular weight polyethylene under the influence of alpha-tocopherol with respect to its application in medical implants. J Mater Sci Mater Med 13:917–921
Oral E, Greenbaum ES, Malhi AS, Harris WH, Muratoglu OK (2005) Characterization of irradiated blends of alpha-tocopherol and UHMWPE. Biomaterials 26:6657–6663. https://doi.org/10.1016/j.biomaterials.2005.04.026
Rowell SL, Oral E, Muratoglu OK (2011) Comparative oxidative stability of alpha-tocopherol blended and diffused UHMWPEs at 3 years of real-time aging. J Orthop Res 29:773–780. https://doi.org/10.1002/jor.21288
Oral E, Wannomae KK, Rowell SL, Muratoglu OK (2007) Diffusion of vitamin E in ultra-high molecular weight polyethylene. Biomaterials 28:5225–5237. https://doi.org/10.1016/j.biomaterials.2007.08.025
Rohde H, Frankenberger S, Zahringer U, Mack D (2010) Structure, function and contribution of polysaccharide intercellular adhesin (PIA) to staphylococcus epidermidis biofilm formation and pathogenesis of biomaterial-associated infections. Eur J Cell Biol 89:103–111. https://doi.org/10.1016/j.ejcb.2009.10.005
MacKintosh EE, Patel JD, Marchant RE, Anderson JM (2006) Effects of biomaterial surface chemistry on the adhesion and biofilm formation of staphylococcus epidermidis in vitro. J Biomed Mater Res A 78:836–842. https://doi.org/10.1002/jbm.a.30905
Bordini B, Stea S, Castagnini F, Busanelli L, Giardina F, Toni A (2018) The influence of bearing surfaces on periprosthetic hip infections: analysis of thirty nine thousand, two hundred and six cementless total hip arthroplasties. Int Orthop. https://doi.org/10.1007/s00264-018-4097-2
Wolf C, Krivec T, Blassnig J, Lederer K, Schneider W (2002) Examination of the suitability of alpha-tocopherol as a stabilizer for ultra-high molecular weight polyethylene used for articulating surfaces in joint endoprostheses. J Mater Sci Mater Med 13:185–189
Shibata N, Tomita N (2005) The anti-oxidative properties of alpha-tocopherol in gamma-irradiated UHMWPE with respect to fatigue and oxidation resistance. Biomaterials 26:5755–5762. https://doi.org/10.1016/j.biomaterials.2005.02.035
Grupp TM, Fritz B, Kutzner I, Schilling C, Bergmann G, Schwiesau J (2017) Vitamin E stabilised polyethylene for total knee arthroplasty evaluated under highly demanding activities wear simulation. Acta Biomater 48:415–422. https://doi.org/10.1016/j.actbio.2016.10.031
Kurtz SM, Dumbleton J, Siskey RS, Wang A, Manley M (2009) Trace concentrations of vitamin E protect radiation crosslinked UHMWPE from oxidative degradation. J Biomed Mater Res A 90:549–563. https://doi.org/10.1002/jbm.a.3212230
Micheli BR, Wannomae KK, Lozynsky AJ, Christensen SD, Muratoglu OK (2012) Knee simulator wear of vitamin E stabilized irradiated ultrahigh molecular weight polyethylene. J Arthroplast 27:95–104. https://doi.org/10.1016/j.arth.2011.03.006
Haider H, Weisenburger JN, Kurtz SM, Rimnac CM, Freedman J, Schroeder DW, Garvin KL (2012) Does vitamin E-stabilized ultrahigh-molecular-weight polyethylene address concerns of cross-linked polyethylene in total knee arthroplasty? J Arthroplast 27:461–469. https://doi.org/10.1016/j.arth.2011.03.024
Wannomae KK, Christensen SD, Micheli BR, Rowell SL, Schroeder DW, Muratoglu OK (2010) Delamination and adhesive wear behavior of alpha-tocopherol-stabilized irradiated ultrahigh-molecular-weight polyethylene. J Arthroplast 25:635–643. https://doi.org/10.1016/j.arth.2009.04.005
Oral E, Wannomae KK, Hawkins N, Harris WH, Muratoglu OK (2004) Alpha-tocopherol-doped irradiated UHMWPE for high fatigue resistance and low wear. Biomaterials 25:5515–5522. https://doi.org/10.1016/j.biomaterials.2003.12.048
Oral E, Malhi AS, Wannomae KK, Muratoglu OK (2008) Highly cross-linked ultrahigh molecular weight polyethylene with improved fatigue resistance for total joint arthroplasty: recipient of the 2006 Hap Paul Award. J Arthroplast 23:1037–1044. https://doi.org/10.1016/j.arth.2007.09.027
Lerf R, Zurbrugg D, Delfosse D (2010) Use of vitamin E to protect cross-linked UHMWPE from oxidation. Biomaterials 31:3643–3648. https://doi.org/10.1016/j.biomaterials.2010.01.076
Oral E, Christensen SD, Malhi AS, Wannomae KK, Muratoglu OK (2006) Wear resistance and mechanical properties of highly cross-linked, ultrahigh-molecular weight polyethylene doped with vitamin E. J Arthroplast 21:580–591. https://doi.org/10.1016/j.arth.2005.07.009
Affatato S, Bracco P, Costa L, Villa T, Quaglini V, Toni A (2012) In vitro wear performance of standard, crosslinked, and vitamin-E-blended UHMWPE. J Biomed Mater Res A 100:554–560. https://doi.org/10.1002/jbm.a.33297
Bladen CL, Teramura S, Russell SL, Fujiwara K, Fisher J, Ingham E, Tomita N, Tipper JL (2013) Analysis of wear, wear particles, and reduced inflammatory potential of vitamin E ultrahigh-molecular-weight polyethylene for use in total joint replacement. J Biomed Mater Res B Appl Biomater 101:458–466. https://doi.org/10.1002/jbm.b.32904
N Gowland James (2014) The wear and biological activity of antioxidant UHMWPE for use in total hip replacements. PhD thesis, University of Leeds.
Bichara DA, Malchau E, Sillesen NH, Cakmak S, Nielsen GP, Muratoglu OK (2014) Vitamin E-diffused highly cross-linked UHMWPE particles induce less osteolysis compared to highly cross-linked virgin UHMWPE particles in vivo. J Arthroplast 29:232–237. https://doi.org/10.1016/j.arth.2014.03.044
Chen W, Bichara DA, Suhardi J, Sheng P, Muratoglu OK (2017) Effects of vitamin E-diffused highly cross-linked UHMWPE particles on inflammation, apoptosis and immune response against S. aureus. Biomaterials 143:46–56. https://doi.org/10.1016/j.biomaterials.2017.07.028
Reno F, Bracco P, Lombardi F, Boccafoschi F, Costa L, Cannas M (2004) The induction of MMP-9 release from granulocytes by vitamin E in UHMWPE. Biomaterials 25:995–1001. https://doi.org/10.1016/S0142-9612(03)00623-9
Reno F, Cannas M (2006) UHMWPE and vitamin E bioactivity: an emerging perspective. Biomaterials 27:3039–3043. https://doi.org/10.1016/j.biomaterials.2006.01.016
Gomez-Barrena E, Esteban J, Molina-Manso D, Adames H, Martinez-Morlanes MJ, Terriza A, Yubero F, Puertolas JA (2011) Bacterial adherence on UHMWPE with vitamin E: an in vitro study. J Mater Sci Mater Med 22:1701–1706. https://doi.org/10.1007/s10856-011-4340-5
Banche G, Bracco P, Bistolfi A, Allizond V, Boffano M, Costa L, Cimino A, Cuffini AM, Del Prever EM (2011) Vitamin E blended UHMWPE may have the potential to reduce bacterial adhesive ability. J Orthop Res 29:1662–1667. https://doi.org/10.1002/jor.21432
Banche G, Allizond V, Bracco P, Bistolfi A, Boffano M, Cimino A, Brach del Prever EM, Cuffini AM (2014) Interplay between surface properties of standard, vitamin E blended and oxidised ultra high molecular weight polyethylene used in total joint replacement and adhesion of Staphylococcus aureus and Escherichia coli. Bone Joint J 96-B:497–501. https://doi.org/10.1302/0301-620X.96B4/32895
Banche G, Bracco P, Allizond V, Bistolfi A, Boffano M, Cimino A, Brach del Prever EM, Cuffini AM (2015) Do crosslinking and vitamin E stabilization influence microbial adhesions on UHMWPE-based biomaterials? Clin Orthop Relat Res 473:974–986. https://doi.org/10.1007/s11999-014-4024-9
Williams DL, Vinciguerra J, Lerdahl JM, Bloebaum RD (2015) Does vitamin E-blended UHMWPE prevent biofilm formation? Clin Orthop Relat Res 473:928–935. https://doi.org/10.1007/s11999-014-3673-z
Kyomoto M, Shobuike T, Moro T, Yamane S, Takatori Y, Tanaka S, Miyamoto H, Ishihara K (2015) Prevention of bacterial adhesion and biofilm formation on a vitamin E-blended, cross-linked polyethylene surface with a poly(2-methacryloyloxyethyl phosphorylcholine) layer. Acta Biomater 24:24–34. https://doi.org/10.1016/j.actbio.2015.05.034
Halma JJ, Eshuis R, Vogely HC, van Gaalen SM, de Gast A (2014) An uncemented iso-elastic monoblock acetabular component: preliminary results. J Arthroplast 30:615–621. https://doi.org/10.1016/j.arth.2014.11.017
Sillesen NH, Greene ME, Nebergall AK, Nielsen PT, Laursen MB, Troelsen A, Malchau H (2015) Three year RSA evaluation of vitamin E diffused highly cross-linked polyethylene liners and cup stability. J Arthroplast 30:2060–1264. https://doi.org/10.1016/j.arth.2015.02.018
Salemyr M, Muren O, Ahl T, Boden H, Chammout G, Stark A, Skoldenberg O (2015) Vitamin-E diffused highly cross-linked polyethylene liner compared to standard liners in total hip arthroplasty. A randomized, controlled trial. Int Orthop 39:1499–1505. https://doi.org/10.1007/s00264-015-2680-3
Shareghi B, Johanson PE, Karrholm J (2015) Femoral head penetration of vitamin E-infused highly cross-linked polyethylene liners: a randomized radiostereometric study of seventy hips followed for two years. J Bone Joint Surg Am 97:1366–1371. https://doi.org/10.2106/JBJS.N.00595
Shareghi B, Johanson PE, Karrholm J (2017) Wear of vitamin E-infused highly cross-linked polyethylene at five years. J Bone Joint Surg Am 99:1447–1452. https://doi.org/10.2106/JBJS.16.00691
Nebergall AK, Troelsen A, Rubash HE, Malchau H, Rolfson O, Greene ME (2016) Five-year experience of vitamin E-diffused highly cross-linked polyethylene wear in total hip arthroplasty assessed by radiostereometric analysis. J Arthroplast 31:1251–1255. https://doi.org/10.1016/j.arth.2015.12.023
Nebergall AK, Greene ME, Laursen MB, Nielsen PT, Malchau H, Troelsen A (2017) Vitamin E diffused highly cross-linked polyethylene in total hip arthroplasty at five years: a randomised controlled trial using radiostereometric analysis. Bone Joint J 99-B:577–584. https://doi.org/10.1302/0301-620X.99B5.37521
Scemama C, Anract P, Dumaine V, Babinet A, Courpied JP, Hamadouche M (2017) Does vitamin E-blended polyethylene reduce wear in primary total hip arthroplasty: a blinded randomised clinical trial. Int Orthop 41:1113–1118. https://doi.org/10.1007/s00264-016-3320-2
Dumbleton JH, Manley MT, Edidin AA (2002) A literature review of the association between wear rate and osteolysis in total hip arthroplasty. J Arthroplasty 17(5):649–661. https://doi.org/10.1054/arth.2002.33664
Flament EM, Berend KR, Hurst JM, Morris MJ, Adams JB, Lombardi AV Jr (2016) Early experience with vitamin E antioxidant-infused highly cross-linked polyethylene inserts in primary total knee arthroplasty. Surg Technol Int XXIX:334–340
Bates MD, Mauerhan DR (2015) Early fracture of a vitamin-E-infused, highly cross-linked polyethylene liner after total hip arthroplasty: a case report. JBJS Case Connect 5:e65. https://doi.org/10.2106/JBJS.CC.N.00157
Barrack RL (2013) Retrieval analysis of an early fracture of a vitamin E-stabilized tibial liner in total knee arthroplasty: a case report. JBJS Case Connect 3:1–6. https://doi.org/10.2106/JBJS.CC.L.00276
Dale H, Fenstad AM, Hallan G, Havelin LI, Furnes O et al (2012) Increasing risk of prosthetic joint infection after total hip arthroplasty. Acta Orthop 83:449–458. https://doi.org/10.3109/17453674.2012.733918
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Opinions and assertions contained herein are those of the authors and are not construed as necessarily representing views of their employer.
Conflict of interest
The authors declare that they have no conflict of interest.
Rights and permissions
About this article
Cite this article
Lambert, B., Neut, D., van der Veen, H.C. et al. Effects of vitamin E incorporation in polyethylene on oxidative degradation, wear rates, immune response, and infections in total joint arthroplasty: a review of the current literature. International Orthopaedics (SICOT) 43, 1549–1557 (2019). https://doi.org/10.1007/s00264-018-4237-8
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00264-018-4237-8