Erratum to: International Orthopaedics (SICOT) (2013) 37:1885–1889
DOI 10.1007/s00264-013-1964-8
The original version of this article contained mistake. The correct Figure legends for Figures 1, 3 and 5 should have been the following:
Fig. 1. HPC (high performance cutting) drill with internally applied cooling system via cooling channels through the tip (σ = 140°; Perschmann)[6]
Fig. 3. Temperature changes during drilling of cemented implants with an internally cooled HPC (high performance cutting) drill (D = 5.5 mm) [6]
Fig. 5. Thermographic scan of drilling procedure [6]
Corresponding reference is:
6. Brand S, Klotz J, Petri M, Ettinger M, Hassel T, Krettek C, Goesling T, Bach FW (2013) Temperature control with internally applied cooling in solid material drilling: an experimental, biomechanical study. Int Orthop. Mar 20 [Epub ahead of print]. doi:10.1007/s00264-013-1850-4
Author information
Authors and Affiliations
Corresponding author
Additional information
The online version of the original article can be found at http://dx.doi.org/10.1007/s00264-013-1964-8.
Rights and permissions
About this article
Cite this article
Brand, S., Klotz, J., Hassel, T. et al. Erratum to: Different thermal conductivity in drilling of cemented compared with cementless hip prostheses in the treatment of periprosthetic fractures of the proximal femur—an experimental biomechanical analysis. International Orthopaedics (SICOT) 39, 1881 (2015). https://doi.org/10.1007/s00264-015-2948-7
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00264-015-2948-7