Skip to main content
SpringerLink
Log in

Research on heat transfer of two-phase dispersed flow in narrow annular channel

  • Original
  • Published:
Heat and Mass Transfer Aims and scope Submit manuscript

Abstract

Narrow channel heat transfer technique is a new developing heat transfer technique in recent years. As the temperature of droplet, steam and wall are decided by forced convection heat transfer between the steam and the wall, between the droplet and the wall, between the steam and the droplet and radiation heat transfer, which makes heat transfer mechanism of dispersed flow be difficultly interpretative. Dispersed flow in narrow annular channel is analyzed in the paper, investigating the influence of all kinds of heat transfer processes on dispersed flow, building annular channel dispersed flow model using thermodynamic non-equilibrium model. Calculation results show heat transfer is mainly controlled by heat transfer process between steam and wall. When temperature is low, radiation can be ignored on heat transfer coefficient calculation. The calculation of model can provide a reference for engineering application of steam generator, refrigeration system and so on.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig 1.
Fig 2.
Fig 3.
Fig 4.
Fig 5.
Fig 6.
Fig 7.
Fig 8.

Similar content being viewed by others

References

  1. Mosyak A, Hetsroni G (1999) Analysis of dryout in horizontal and inclined tubes. Int J Multiphase Flow 25(8):1521–1543

    Article  CAS  Google Scholar 

  2. Groeneveld DC (1984) Inverted annular and low quality film boiling: a state of art report, Presented at international workshop fundamental aspects of post dryout heat transfer. Slat Lake City, UT, USA, p 4

    Google Scholar 

  3. Chen JC, Ozkaynak FT, Sundaram RK (1979) Vapor heat transfer in postCHF region including the effect of thermodynamic non equilibrium. Nucl Eng Des 51:143–155

    Article  Google Scholar 

  4. Bolle L, Moureau JC (1986) Spray cooling of hot surface. Multiphase Sci Technol 1

  5. Koizumi Y et al (1979) Post dryout heat transfer to R113 upward flow in a vertical tube. Int J Heat Mass Transfer 22:669–678

    Article  Google Scholar 

  6. Hffman TW, Rss LL (1972) A theoretical investigation of the effect of mass transfer of heat transfer to evaporation droplet. J Heat Mass Transfer 15:599

    Article  Google Scholar 

  7. Wang Z, Liu R, Jia D et al (2001) Post-dryout heat transfer for vertical narrow annular channel. J Xi’an Jiaotong Univ 9:921–925

    Google Scholar 

Download references

Author information

Authors and Affiliations

  1. Department of Engineering Mechanics, Tsinghua University, Beijing, China

    Zenghui Wang

  2. Department of Thermal Engineering, Tsinghua University, Beijing, China

    Tao Zhou

Authors
  1. Zenghui Wang
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Tao Zhou
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Zenghui Wang.

Rights and permissions

Reprints and permissions

About this article

Cite this article

Wang, Z., Zhou, T. Research on heat transfer of two-phase dispersed flow in narrow annular channel. Heat Mass Transfer 41, 792–798 (2005). https://doi.org/10.1007/s00231-004-0603-8

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s00231-004-0603-8

Keywords

Search

Navigation