Abstract
The goal of the study was to investigate the influence of bark of Turkish hazel (Corylus colurna L.) on strain transfer from xylem to bark surface. The study addresses issues of tree biomechanics that calls for a high-quality deformation data measured on trees’ surfaces in a noninvasive way. For these purposes, the optical technique employing 3D digital image correlation (3D-DIC) was used and tested against extensometers commonly used for such applications. The measured tree was subjected to bending by two pulling tests to induce the strain in tree stem, during which the analyzed area of interest (AOI) on the tree was studied in both variants with and without bark. The DIC technique successfully provided strain fields on a tree with bark and without despite its highly complicated structure. The absolute values of vertical strain measured by both techniques agree with each other in order of magnitude. However, 3D-DIC returns generally lower values than extensometers. Statistical tests proved (at p < 0.05) that the vertical strain measured on a bark was lower than that measured on wood, which confirms the hypothesis that bark layers reduce the strain transfer from wood to tree surface. The extent of strain reduction is highly dependent on force and was statistically detectable when the force reached ca. 5 kN. This is an important fact especially for practical use of optical measurements that are to replace standard extensometers. Measured displacements agreed with each other for both variants within a whole range of loads.
Similar content being viewed by others
References
Bauer G, Speck T (2012) Restoration of tensile strength in bark samples of Ficus benjamina due to coagulation of latex during fast self-healing of fissures. Ann Bot 109:807–811
Bodig J, Jayne BA (1993) Mechanics of wood and wood composites. Krieger Pub, New York
Crafts AS, Crisp CE (1971) Phloem transport in plants. California University, Davis
Crook MJ, Ennos AR (1996) The anchorage mechanics of deep rooted larch, Larix europea L. japonica. J Exp Bot 47:1509–1517
Einspahr DW, van Eperen RH, Fiscus ML (1984) Morphological and bark strength characteristics important to wood/bark adhesion in hardwoods. Wood Fiber Sci 16(3):339–348
Ennos AR (1995) Development of buttresses in rainforest trees: the influence of mechanical stress. In: Coutts MP, Grace J (eds) Wind and trees. Cambridge University Press, Cambridge, pp 293–301
Fraser AI (1962) The soil and roots as factors in tree stability. Forestry 35:117–127
Ghani MA, Stokes A, Fourcaud T (2008) The effect of root architecture and root loss through trenching on the anchorage of tropical urban trees (Eugenia grandis Wight). Trees 23:197–209
Jonsson MJ, Foetzki A, Kalberer M, Lundström T, Ammann W, Stöckli V (2006) Root-soil rotation stiffness of Norway spruce (Picea abies (L.) Karst) growing on subalpine forested slopes. Plant Soil 285:267–277
Lindroth A, Lagergren F, Grelle A, Klemedtsson L, Langvall O, Weslien P, Tuulik J (2009) Storms can cause Europe-wide reduction in forest carbon sink. Glob Chang Biol 15:346–355
Lundstrom T, Jonsson MJ, Kalberer M (2007) The root-soil system of Norway spruce subjected to turning moment: resistance as a function of rotation. Plant Soil 300(1–2):35–49
Mancuso S (ed) (2012) Measuring roots: an updated approach. Springer, Berlin. ISBN 978-3-642-22066-1
NASA (2013) Morton Arboretum Partners with NASA to understand why trees fail. http://www.nasa.gov/centers/glenn/technology/morton_tree.html. Last page update 3 Apr 2013
Niklas KJ (1999) The mechanical role of bark. Am J Bot 86(4):465–469
Paine CET, Stahl C, Courtois EA, Patino S, Sarmiento C, Baraloto C (2010) Functional explanations for variation in bark thickness in tropical rain forest trees. Funct Ecol 24:1202–1210
Panshin AJ, de Zeeuw C (1980) Textbook of wood technology—structure, identification, properties, and uses of the commercial woods of the United States and Canada. McGraw-Hill, New York
Peters WH, Ranson WF (1982) Digital imaging techniques in experimental stress analysis. Opt Eng 21(3):427–431
Quine CP (1995) Assessing the risk of wind damage to forests: practice and pitfalls. In: Coutts MP, Grace J (eds) Wind and Trees. Cambridge University Press, Cambridge, pp 379–403
Rahardjo H, Harnas FR, Indrawan IGB, Leong EC, Tan PY, Fong YK, Ow LF (2014) Understanding the stability of Samanea saman trees through tree pulling, analytical calculations and numerical models. Urban For Urban Green 13(2):355–364
Rosell JA, Gleason S, Mendez-Alonzo R, Chang Y, Westoby M (2013) Bark functional ecology: evidence for tradeoffs, functional coordination, and environment producing bark diversity. New Phytol. doi:10.1111/nph.12541
Sani L, Lisci R, Moschi M, Sarri D, Rimediotti M, Vieri M, Tofanelli S (2012) Preliminary experiments and verification of controlled pulling tests for tree stability assessments in Mediterranean urban areas. Biosyst Eng 112:218–226
Schelhaas MJ, Nabuurs GJ, Schuck A (2003) Natural disturbances in the European forests in the 19th and 20th centuries. Glob Chang Biol 9:1620–1633
Schweingruber FH, Börner A, Schulze ED (2006) Atlas of woody plant stems. Springer, Berlin, p 229. doi:10.1007/978-3-540-32525-3
Sebera V, Praus L, Tippner J, Kunecký J, Čepela J, Wimmer R (2014) Using optical full-field measurement based on digital image correlation to measure strain on a tree subjected to mechanical load. Trees-Struct Funct 28(4):1173–1184. ISSN 0931-1890
Sinn G, Wessolly L (1989) A contribution to the proper assessment of the strength and stability of trees. Arboric J 13:45–65
Stokes A (1999) Strain distribution during anchorage failure of Pinus pinaster Ait. At different ages and tree growth response to wind-induced root movement. Plant Soil 217:17–27
Sutton MA, Orteu JJ, Schreier HW (2009) Digital image correlation for shape and deformation measurements basic concepts, theory and applications. Springer, Heidelberg
Szorádová A, Praus L, Kolařík J (2013) Evaluation of the root system resistance against failure of urban trees using principal component analysis. Biosyst Eng 115(3):244–249
Wessolly L (1991) 2 New methods to measure the strength and stability of trees. Holz Roh Werkst 3:99–104
Acknowledgments
The authors thank the European Social Fund and the state budget of the Czech Republic, project “The Establishment of an International Research Team for the Development of New Wood-based Materials” reg. no. CZ.1.07/2.3.00/20.0269 (EE2.3.20.0269).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Sebera, V., Kunecký, J., Praus, L. et al. Strain transfer from xylem to bark surface analyzed by digital image correlation. Wood Sci Technol 50, 773–787 (2016). https://doi.org/10.1007/s00226-016-0819-z
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00226-016-0819-z