Abstract
As permanent magnet claw pole machine (PMCPM) is designed with a complex 3D magnetic structure, the 3D finite element method (FEM) is commonly used for its accurate performance analysis. However, using 3D FEM will consume a long time in the initial design stage. Its analysis time can be saved greatly by using the analytical method (AM) or equivalent magnetic circuit method (MCM), however, the obtained performance is not accurate and some performance even cannot be obtained if only one of these methods is used. To overcome the above constraints, this paper proposes a calculation method that combined analytical and equivalent magnetic circuit method (AMCM) to calculate the main electromagnetic performance of PMCPM quickly. Its calculated results are verified by corresponding results obtained by using the 3D FEM. It can be seen that the proposed AMCM is effective for calculating the main electromagnetic performance and designing of PMCPM.
Similar content being viewed by others
Availability of data and materials
Not applicable.
References
Li Y, Yu Z, Meng H, Wang J, Jing Y (2021) Design and optimization of hybrid-excited claw-pole machine for vehicle. IEEE Trans Appl Supercond 31(8):1–4. https://doi.org/10.1109/TASC.2021.3094433
Lorenz F, Werner R, Föse M (2018) Claw pole generator with adapted efficiency curve for small scale wind turbines. In: 2018 IEEE international conference on industrial technology (ICIT), pp 346–351. https://doi.org/10.1109/ICIT.2018.8352202
Du W, Zhao S, Zhang H, Zhang M, Gao J (2021) A novel claw pole motor with soft magnetic composites. IEEE Trans Magn 57(2):1–4. https://doi.org/10.1109/TMAG.2020.3019830
Liu CC, Wang DY, Wang SP, Wang YH (2020) A novel flux reversal claw pole machine with soft magnetic composite cores. IEEE Trans Appl Supercond 30(4):1–5. https://doi.org/10.1109/TASC.2020.2977281
Zhang W, Xu Y, Sun M (2021) Design of a novel claw pole transverse flux permanent magnet motor based on hybrid stator core. IEEE Trans Magn 57(6):1–5. https://doi.org/10.1109/TMAG.2021.3060748
Liu C, Zhu J, Wang Y, Guo Y, Lei G (2015) Comparison of claw-pole machines with different rotor structures. IEEE Trans Magn 51(11):1–4. https://doi.org/10.1109/TMAG.2015.2443022
Liu C et al (2018) Performance evaluation of an axial flux claw pole machine with soft magnetic composite cores. IEEE Trans Appl Supercond 28(3):1–5. https://doi.org/10.1109/TASC.2017.2777927
Li Y, Yu Z, Meng H, Wang J, Jing Y (2021) Design and optimization of hybrid-excited claw-pole machine for vehicle. IEEE Trans App Supercond 31(8):1–4. https://doi.org/10.1109/TASC.2021.3094433
Zhu ZQ, Howe D, Bolte E, Ackermann B (1993) Instantaneous magnetic field distribution in brushless permanent magnet DC motors. I. Open-circuit field. IEEE Trans Magn 29(1):124–135. https://doi.org/10.1109/20.195557
Zhu ZQ, Howe D (1993) Instantaneous magnetic field distribution in brushless permanent magnet DC motors. III. Effect of stator slotting. IEEE Trans Magn 29(1):143–151. https://doi.org/10.1109/20.195559
Zarko D, Ban D, Lipo TA (2006) Analytical calculation of magnetic field distribution in the slotted air gap of a surface permanent-magnet motor using complex relative air-gap permeance. IEEE Trans Magn 42(7):1828–1837. https://doi.org/10.1109/TMAG.2006.874594
Zhu ZQ, Wu LJ, Xia ZP (2010) An accurate subdomain model for magnetic field computation in slotted surface-mounted permanent-magnet machines. IEEE Trans Magn 46(4):1100–1115. https://doi.org/10.1109/TMAG.2009.2038153
Wang F, Liao Y, Chen J, Zhang C, Luo J, Ai Z (2017) Analytical calculation of air gap magnetic field in permanent magnet linear motors. In: 2017 12th IEEE conference on industrial electronics and applications (ICIEA), pp 1706–1711. https://doi.org/10.1109/ICIEA.2017.8283114
Guo B, Du Y, Peng F, Huang Y (2022) Magnetic field calculation in axial flux permanent magnet motor with rotor eccentricity. IEEE Trans Magn 58(9):1–4. https://doi.org/10.1109/TMAG.2022.3185708
Du T, Geng H, Zhang Y, Lin H, Li Y, Yu L (2019) Exact analytical method for active magnetic bearings with rotor eccentricity. IEEE Trans Magn 55(12):1–12. https://doi.org/10.1109/TMAG.2019.2942023
Huang L, Xiong B, Qian X (2022) Calculation and analysis of harmonic leakage reactance of asynchronous motors under overload condition. In: 2022 25th international conference on electrical machines and systems (ICEMS), pp 1–4. https://doi.org/10.1109/ICEMS56177.2022.9982876
Si M, Yang X, Zhao S, Si J (2015) Development of the equivalent magnetic circuit model for a surface-interior permanent magnet synchronous motor. In: 2015 6th international conference on power electronics systems and applications (PESA), pp 1–4. https://doi.org/10.1109/PESA.2015.7398952
Wang D, Wang X (2010) Analysis of static performance for flux-switching motor by nonlinear equivalent magnetic circuit model. In: 2010 International conference on electrical machines and systems, pp 1661–1665
Song J, Lee JH, Kim D, Kim Y, Jung S (2017) Analysis and modeling of concentrated winding variable flux memory motor using magnetic equivalent circuit method. IEEE Trans Magn 53(6):1–4. https://doi.org/10.1109/TMAG.2017.2657226
Lee J-J, Lee J, Kim K-S (2018) Design of a WFSM for an electric vehicle based on a nonlinear magnetic equivalent Circuit. IEEE Trans Appl Supercond 28(3):1–4. https://doi.org/10.1109/TASC.2018.2807438
Fu D, Si H, Wu X, Xu Y (2021) Nonlinear equivalent magnetic network of a transverse-flux permanent magnet linear motor based on combine steel with SMC. In: 2021 13th International symposium on linear drives for industry applications (LDIA), pp 1–4. https://doi.org/10.1109/LDIA49489.2021.9505982
Li C, Wu X (2021) No-load magnetic field calculation of eccentric pole permanent magnet motor based on equivalent magnetic network method. In: 2021 24th international conference on electrical machines and systems (ICEMS), pp 1065–1068. https://doi.org/10.23919/ICEMS52562.2021.9634213
Zhang J, Wang J, Yu Z, Li Y (2020) Analytical calculation for two layers pmsrm based on equivalent magnetic network method. In: 2020 IEEE international conference on applied superconductivity and electromagnetic devices (ASEMD), pp 1–2. https://doi.org/10.1109/ASEMD49065.2020.9276044
Su W, Wang D, Guo Y, Su Z (2019) The DMCM-based analytical calculation of radial vibration force in a nonsalient pole synchronous generator in no-load conditions. IEEE Trans Ind Electron 66(7):5364–5373. https://doi.org/10.1109/TIE.2018.2868285
Liu C, Wang X, Wang S, Wang Y, Lei G, Zhu J (2022) Magnetothermal coupling analysis of permanent magnet claw pole machine using combined 3D magnetic and thermal network method. IEEE Trans Appl Supercond 32(6):1–5. https://doi.org/10.1109/TASC.2022.3151037
Ma C et al (2021) Analytical model of open-circuit air-gap field distribution in interior permanent magnet machines based on magnetic equivalent circuit method and boundary conditions of macroscopic equations. IEEE Trans Magn 57(3):1–9. https://doi.org/10.1109/TMAG.2021.3051498
Jiang H, Su Z, Wang D (2021) Analytical calculation of active magnetic bearing based on distributed magnetic circuit method. IEEE Trans Energy Conversion 36(3):1841–1851. https://doi.org/10.1109/TEC.2020.3040975
Hsieh M-F, Lin I-H, Dorrell DG (2014) An analytical method combining equivalent circuit and magnetic circuit for BDFRG. IEEE Trans Magn 50(11):1–5. https://doi.org/10.1109/TMAG.2014.2325563
Laoubi Y, Dhifli M, Verez G, Amara Y, Barakat G (2015) Open circuit performance analysis of a permanent magnet linear machine using a new hybrid analytical model. IEEE Trans Magn 51(3):1–4. https://doi.org/10.1109/TMAG.2014.2361017
Funding
This work was supported by the National Natural Science Foundation of China under project 52007047, and in part by the Outstanding Youth Innovation Project funded by State Key Laboratory of Reliability and Intelligence of Electrical Equipment EERI_OY2021005.
Author information
Authors and Affiliations
Contributions
CL, proposed the main idea and wrote the whole paper, ZC finished the analytical model, SW finished the finite element analysis YW provided the useful suggestion to the whole work.
Corresponding author
Ethics declarations
Conflict of interest
The authors declare that they have no conflict of interest.
Ethical approval
Not applicable.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Liu, C., Chao, Z., Wang, S. et al. A quick electromagnetic performance analysis method for permanent magnet claw pole machine based on combined analytical and equivalent magnetic circuit method. Electr Eng 105, 1541–1553 (2023). https://doi.org/10.1007/s00202-023-01751-4
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00202-023-01751-4