Avoid common mistakes on your manuscript.
Correction to: The International Journal of Advanced Manufacturing Technology (2023) 126:635–658
The original version of this article unfortunately contained a mistake.
The sentence with error is: "The volume of WC-86 (VWC − 86(C)) captured was determined by multiplying MWC − 86 with the density of WC-86 (ρWC − 86 = 16.3 × 10−3g mm−3) whereas the volume of Inconel 625 (VInconel 625 (C)) coating deposited was obtained by multiplying MInconel 625 with its density (ρInconel 625 = 7.44 × 10−3g mm−3)."
Should be corrected to: "The volume of WC-86 (VWC − 86(C)) captured was determined by dividing MWC − 86 with the density of WC-86 (ρWC − 86 = 16.3 × 10−3g mm−3) whereas the volume of Inconel 625 (VInconel 625 (C)) coating deposited was obtained by dividing MInconel 625 with its density (ρInconel 625 = 7.44 × 10−3g mm−3)."
The designation of the corresponding author, Eyitayo Olatunde Olakanmi, has corrected to: UNESCO Chair on Advanced Manufacturing is now changed to UNESCO Chair on Sustainable Manufacturing & Innovation Technologies (UCoSMIT).
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Olakanmi, E.O., Hoosain, S., Lawal, S.A. et al. Correction to: Process and materials design via statistical modeling for Inconel-625/tungsten carbide wear-resistant composite coatings fabricated by laser direct metal deposition technique. Int J Adv Manuf Technol 130, 4067 (2024). https://doi.org/10.1007/s00170-023-12943-4
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00170-023-12943-4