Skip to main content
SpringerLink
Log in

Investigation of fiber waviness in fused deposition modeling printed continuous fiber-reinforced polymers

  • ORIGINAL ARTICLE
  • Published:
The International Journal of Advanced Manufacturing Technology Aims and scope Submit manuscript

Abstract

Fused deposition modeling (FDM) is a widely used method of 3D printing that can be used to easily create complex polymer parts for a wide variety of industries, but they have inherently low mechanical properties and are not suitable for use in higher load applications. Fiber reinforcement can be added to polymers to produce continuous fiber-reinforced polymers (CFRPs), which significantly improves the stiffness and strength of FDM-printed polymers. Fiber waviness (FW) has been shown to decrease mechanical properties in other forms of CFRPs, but its effect on FDM-printed CFRPs is not well understood. This study aims to determine the association of FW and stiffness for FDM-printed CFRPs, as well as to investigate improving print quality by changing process parameters. The strong negative association found between FW and stiffness indicates that increased FW decreases the stiffness of FDM-printed CFRPs. Additionally, changing the amount of tension applied to the fiber during printing had a significant effect on FW, as does the length of straight fiber paths. Finally, the breaking force and break location on the fibers are determined by factors other than FW. These findings are useful for improving print quality and broadening the application of FDM-printed CFRPs.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10

Similar content being viewed by others

References

  1. Zhang H, Huang T, Jiang Q, He L, Bismarck A, Hu Q (2021) Recent progress of 3D printed continuous fiber reinforced polymer composites based on fused deposition modeling: a review. J Mater Sci 56:12999–13022. https://doi.org/10.1007/s10853-021-06111-w

    Article  Google Scholar 

  2. Jagadeesh P, Puttegowda M, Rangappa SM, Alexey K, Gorbatyuk S, Khan A, Doddamani M, Siengchin S (2022) A comprehensive review on 3D printing advancements in polymer composites: technologies, materials, and applications. Int J Adv Manuf Technol 121:127–169. https://doi.org/10.1007/s00170-022-09406-7

    Article  Google Scholar 

  3. Wickramasinghe S, Do T, Tran P (2020) FDM-based 3D printing of polymer and associated composite: a review on mechanical properties, defects and treatments. Polymers (Basel) 12:1529. https://doi.org/10.3390/polym12071529

    Article  Google Scholar 

  4. Aliheidari N, Christ J, Tripuraneni R, Nadimpalli S, Ameli A (2018) Interlayer adhesion and fracture resistance of polymers printed through melt extrusion additive manufacturing process. Mater Des 156:351–361. https://doi.org/10.1016/j.matdes.2018.07.001

    Article  Google Scholar 

  5. Saroia J, Wang Y, Wei Q, Lei M, Li X, Guo Y, Zhang K (2020) A review on 3D printed matrix polymer composites: its potential and future challenges. Int J Adv Manuf Technol 106:1695–1721. https://doi.org/10.1007/s00170-019-04534-z

    Article  Google Scholar 

  6. Dickson AN, Abourayana HM, Dowling DP (2020) 3D printing of fibre-reinforced thermoplastic composites using fused filament fabrication—a review. Polymers (Basel) 12:2188. https://doi.org/10.3390/POLYM12102188

  7. Yao X, Luan C, Zhang D, Lan L, Fu J (2017) Evaluation of carbon fiber-embedded 3D printed structures for strengthening and structural-health monitoring. Mater Des 114:424–432. https://doi.org/10.1016/j.matdes.2016.10.078

    Article  Google Scholar 

  8. Heidari-Rarani M, Rafiee-Afarani M, Zahedi AM (2019) Mechanical characterization of FDM 3D printing of continuous carbon fiber reinforced PLA composites. Compos Part B Eng 175:107147. https://doi.org/10.1016/j.compositesb.2019.107147

    Article  Google Scholar 

  9. Yang C, Tian X, Liu T, Cao Y, Li D (2017) 3D printing for continuous fiber reinforced thermoplastic composites: mechanism and performance. Rapid Prototyp J 23:209–215. https://doi.org/10.1108/RPJ-08-2015-0098

    Article  Google Scholar 

  10. Matsuzaki R, Ueda M, Namiki M, Jeong T-K, Asahara H, Horiguchi K, Nakamura T, Todoroki A, Hirano Y (2016) Three-dimensional printing of continuous-fiber composites by in-nozzle impregnation. Sci Rep 6:23058. https://doi.org/10.1038/srep23058

    Article  Google Scholar 

  11. Bettini P, Alitta G, Sala G, Di Landro L (2017) Fused deposition technique for continuous fiber reinforced thermoplastic. J Mater Eng Perform 26:843–848. https://doi.org/10.1007/s11665-016-2459-8

    Article  Google Scholar 

  12. Agarwal K, Kuchipudi SK, Girard B, Houser M (2018) Mechanical properties of fiber reinforced polymer composites: a comparative study of conventional and additive manufacturing methods. J Compos Mater 52:3173–3181. https://doi.org/10.1177/0021998318762297

    Article  Google Scholar 

  13. Saeed K, McIlhagger A, Harkin-Jones E, McGarrigle C, Dixon D, Ali Shar M, McMillan A, Archer E (2022) Characterization of continuous carbon fibre reinforced 3D printed polymer composites with varying fibre volume fractions. Compos Struct 282:115033. https://doi.org/10.1016/j.compstruct.2021.115033

    Article  Google Scholar 

  14. Akhoundi B, Behravesh AH, Bagheri Saed A (2019) Improving mechanical properties of continuous fiber-reinforced thermoplastic composites produced by FDM 3D printer. J Reinf Plast Compos 38:99–116. https://doi.org/10.1177/0731684418807300

    Article  Google Scholar 

  15. Parmiggiani A, Prato M, Pizzorni M (2021) Effect of the fiber orientation on the tensile and flexural behavior of continuous carbon fiber composites made via fused filament fabrication. Int J Adv Manuf Technol 114:2085–2101. https://doi.org/10.1007/s00170-021-06997-5

    Article  Google Scholar 

  16. Kasmi S, Ginoux G, Allaoui S, Alix S (2021) Investigation of 3D printing strategy on the mechanical performance of coextruded continuous carbon fiber reinforced PETG. J Appl Polym Sci 138:50955. https://doi.org/10.1002/app.50955

  17. Fedulov B, Fedorenko A, Khaziev A, Antonov F (2021) Optimization of parts manufactured using continuous fiber three-dimensional printing technology. Compos Part B Eng 227:109406. https://doi.org/10.1016/j.compositesb.2021.109406

  18. Gao J, Li B, Bu H, Li X, Zhan X (2023) Effect of infill density and reinforced perimeters on tensile properties and fracture mechanism of 3D printing carbon fiber–reinforced composite. Int J Adv Manuf Technol 128:267–281. https://doi.org/10.1007/s00170-023-11871-7

  19. Mosleh N, Rezadoust AM, Dariushi S (2021) Determining process-window for manufacturing of continuous carbon fiber-reinforced composite Using 3D-printing. Mater Manuf Process 36:409–418. https://doi.org/10.1080/10426914.2020.1843664

    Article  Google Scholar 

  20. Qiao J, Li Y, Li L (2019) Ultrasound-assisted 3D printing of continuous fiber-reinforced thermoplastic (FRTP) composites. Addit Manuf 30:100926. https://doi.org/10.1016/j.addma.2019.100926

    Article  Google Scholar 

  21. Rivero-Romero O, Barrera-Fajardo I, Unfried-Silgado J (2023) Effects of printing parameters on fiber eccentricity and porosity level in a thermoplastic matrix composite reinforced with continuous banana fiber fabricated by FFF with in situ impregnation. Int J Adv Manuf Technol 125:1893–1901. https://doi.org/10.1007/s00170-022-10799-8

    Article  Google Scholar 

  22. Liu F, Ferraris E, Ivens J (2022) Mechanical investigation and microstructure performance of a two-matrix continuous carbon fibre composite fabricated by 3D printing. J Manuf Process 79:383–393. https://doi.org/10.1016/j.jmapro.2022.04.050

    Article  Google Scholar 

  23. Kumar MA, Khan MS, Mishra SB (2020) Effect of machine parameters on strength and hardness of FDM printed carbon fiber reinforced PETG thermoplastics. Mater Today Proc 27:975–983. https://doi.org/10.1016/j.matpr.2020.01.291

    Article  Google Scholar 

  24. Kulkarni P, Mali KD, Singh S (2020) An overview of the formation of fibre waviness and its effect on the mechanical performance of fibre reinforced polymer composites. Compos Part A Appl Sci Manuf 137:106013. https://doi.org/10.1016/j.compositesa.2020.106013

    Article  Google Scholar 

  25. Alves MP, Cimini Junior CA, Ha SK (2021) Fiber waviness and its effect on the mechanical performance of fiber reinforced polymer composites: an enhanced review. Compos Part A Appl Sci Manuf 149:106526. https://doi.org/10.1016/j.compositesa.2021.106526

    Article  Google Scholar 

  26. Thor M, Sause MGR, Hinterhölzl RM (2020) Mechanisms of origin and classification of out-of-plane fiber waviness in composite materials — a review. J Compos Sci 4:130. https://doi.org/10.3390/jcs4030130

  27. Mamalis D, Flanagan T, Brádaigh ÓCM (2018) Effect of fibre straightness and sizing in carbon fibre reinforced powder epoxy composites. Compos Part A Appl Sci Manuf 110:93–105. https://doi.org/10.1016/j.compositesa.2018.04.013

    Article  Google Scholar 

  28. Anisoprint Support (2020) Aura Settings Review. Anisoprint Sarl, Esch-sur-Alzette, Luxembourg. https://support.anisoprint.com/aura/settings-review/. Accessed 29 Aug 2023

  29. Doke J (2023) GRABIT, MATLAB Central File Exchange. https://www.mathworks.com/matlabcentral/fileexchange/7173-grabit

  30. R Core Team (2023) R: a language and environment for statistical computing. R Foundation for Statistical Computing, Vienna, Austria. https://www.r-project.org/

Download references

Funding

This work was supported by the University of Colorado Denver startup funding.

Author information

Authors and Affiliations

  1. Department of Mechanical Engineering, University of Colorado Denver, Denver, CO, USA

    Halston J. C. Sandford & Guoying Dong

  2. Department of Materials Science and Engineering, Monash University, Clayton, VIC, Australia

    Yunlong Tang

Authors
  1. Halston J. C. Sandford
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Yunlong Tang
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Guoying Dong
    View author publications

    You can also search for this author in PubMed Google Scholar

Contributions

All authors contributed to the study conception and design. Material preparation, data collection, and analysis were performed by HJCS. The first draft of this manuscript was written by HJCS, and all authors commented on previous versions of the manuscript. All authors read and approved the final manuscript.

Corresponding author

Correspondence to Guoying Dong.

Ethics declarations

Competing interests

The authors declare no competing interests.

Additional information

Publisher's Note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Rights and permissions

Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Sandford, H.J.C., Tang, Y. & Dong, G. Investigation of fiber waviness in fused deposition modeling printed continuous fiber-reinforced polymers. Int J Adv Manuf Technol 130, 3771–3780 (2024). https://doi.org/10.1007/s00170-023-12896-8

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s00170-023-12896-8

Keywords

Search

Navigation