Abstract
CNC machining center linear axis thermal positioning errors, seen as the synthetic consequences of geometric and thermal errors, respectively generated due to the manufacturing and assembling inaccuracies and the asymmetric thermal deformation of the machining center structure, are significantly affected by varying position of the cutting point and shifting state of temperature field. Hence, developing a practical approach to reduce or even to eliminate thermal positioning errors is crucial. This paper proposes an approach to decouple and separate machining center linear axis thermal positioning errors, based on which a highly accurate prediction model of the thermal positioning error is formulated. A sensitivity analysis-based thermal critical point optimization method is presented where grey theory is borrowed to characterize the mapping between thermal positioning error and varying temperature fields, according to which the highly related temperature sensors are derived. The thermal positioning errors are then decoupled and separated into geometric and thermal errors by adopting multiple regression algorithm and linear fitting approach, respectively. Accordingly, the comprehensive thermal positioning error prediction model is constrcuted, based on which the compensation approach is also proposed. Next, the corresponding compensation module is developed within the SIEMENS 840D CNC system to realize the online compensation strategy, providing the engineering applications. Experimental validations are performed on a commercial machining center, where the thermal positioning errors of the Z-axis are measured with the help of a laser interferometer testing kit and a thermal inspection instrument. The data comparisons indicate that the maximum thermal positioning errors of the Z-axis in the cold and warm state are respectively decreased for 87.09\(\%\) and 49.87\(\%\)after activating the compensation module, which also suggests that the proposed approach is adequate and accurate to decouple and separate the thermal positioning errors.
Similar content being viewed by others
References
Bryan J (1990) International status of thermal error research (1990). CIRP annals 39(2):645–656
Mayr J, Jedrzejewski J, Uhlmann E, Donmez MA, Knapp W, Härtig F, Wendt K, Moriwaki T, Shore P, Schmitt R et al (2012) Thermal issues in machine tools. CIRP annals 61(2):771–791
Ramesh R, Mannan M, Poo A (2003) Thermal error measurement and modelling in machine tools.: Part i. influence of varying operating conditions. Int J Mach Tools Manuf. 43(4):391–404
Feng W, Li Z, Gu Q, Yang J (2015) Thermally induced positioning error modelling and compensation based on thermal characteristic analysis. Int J Mach Tools Manuf. 93:26–36
Świć A, Gola A, Sobaszek Ł, Šmidová N (2021) A thermo-mechanical machining method for improving the accuracy and stability of the geometric shape of long low-rigidity shafts. J Intell Manuf. 32(7):1939–1951
Zhang W, Zhang X, Zhang J, Zhao W (2019) Analysis of lead screw pre-stretching influences on the natural frequency of ball screw feed system. Precis Eng 57:30–44
Shi H, He B, Yue Y, Min C, Mei X (2019) Cooling effect and temperature regulation of oil cooling system for ball screw feed drive system of precision machine tool. Applied Thermal Engineering 161:114150
Liu S, Yang Z, Wei Q, Chen Y, Liu L (2021) Thermal error model of linear motor feed system based on Bayesian neural network. IEEE Access 9:112561–112572
Liu P, Yao X, Ge G, Du Z, Feng X, Yang J (2021) A dynamic linearization modeling of thermally induced error based on data-driven control for CNC machine tools. Int J Precis Eng Manuf 22(2):241–258
Tanaka S, Kizaki T, Tomita K, Tsujimura S, Kobayashi H, Sugita N (2023) Robust thermal error estimation for machine tools based on in-process multi-point temperature measurement of a single axis actuated by a ball screw feed drive system. J Manuf Process. 85:262–271
Yang H, Xing R, Du F (2020) Thermal error modelling for a high-precision feed system in varying conditions based on an improved Elman network. Int J Adv Manuf Technol. 106(1):279–288
Lei M, Yang J, Wang S, Zhao L, Xia P, Jiang G, Mei X (2019) Semi-supervised modeling and compensation for the thermal error of precision feed axes. Int J Adv Manuf Technol. 104(9):4629–4640
Li Z, Yang J, Fan K, Zhang Y (2015) Integrated geometric and thermal error modeling and compensation for vertical machining centers. Int J Adv Manuf Technol. 76(5):1139–1150
Liu PL, Du ZC, Li HM, Deng M, Feng XB, Yang JG (2021) Thermal error modeling based on BiLSTM deep learning for CNC machine tool. Advances in Manufacturing 9:235–249
Liu YC, Li KY, Tsai YC (2021) Spindle thermal error prediction based on LSTM deep learning for a CNC machine tool. Applied Sciences 11(12):5444
Liu J, Cai Y, Zhang Q, Zhang H, He H, Gao X, Ding L (2021) Thermal error analysis of tauren EDM machine tool based on FCM fuzzy clustering and RBF neural network. J Intell & Fuzzy Syst. (Preprint):1–12
Liu J, Ma C, Gui H, Wang S (2022) Transfer learning-based thermal error prediction and control with deep residual LSTM network. Knowledge-Based Systems 237:107704
Huang Y, Fan K, Lou Z, Sun W (2020) A novel modeling of volumetric errors of three-axis machine tools based on abbe and Bryan principles. Int J Mach Tools Manuf. 151
Kizaki T, Tsujimura S, Marukawa Y, Morimoto S, Kobayashi H (2021) Robust and accurate prediction of thermal error of machining centers under operations with cutting fluid supply. CIRP Annals 70(1):325–328
Li Y, Shi H, Ji S, Liang F (2021) Thermal positioning error modeling of servo axis based on empirical modeling method. Micromachines 12(2):201
Li Y, Chen Q, Gao F, Kou X, Liu Y, Wei X (2023) Synthetic positioning error modeling for a linear feed system based on GA-SVR algorithm. J Braz Soc Mech Sci Eng. 45(2):85
Baum C, Brecher C, Klatte M, Lee TH, Tzanetos F (2018) Thermally induced volumetric error compensation by means of integral deformation sensors. Procedia CIRP 72:1148–1153
Fujishima M, Narimatsu K, Irino N, Ido Y (2018) Thermal displacement reduction and compensation of a turning center. CIRP J Manuf Sci Technol. 22:111–115
Liu J, Ma C, Wang S (2020) Data-driven thermally-induced error compensation method of high-speed and precision five-axis machine tools. Mech Syst Signal Process. 138:106538
Bitar-Nehme E, Mayer J (2016) Thermal volumetric effects under axes cycling using an invar R-test device and reference length. Int J Mach Tools Manuf. 105:14–22
Wei X, Feng X, Miao E, Qian M, Pan Q (2022) Sub-regional thermal error compensation modeling for CNC machine tool worktables. Precis Eng. 73:313–325
230-3 I (2007) Test code for machine tools part 3: determination of thermal effects. (International Organisation for Standardization)
Ma C, Liu J, Wang S (2020) Thermal error compensation of linear axis with fixed-fixed installation. Int J Mech Sci. 175:105531
Liu H, Miao EM, Wei XY, Zhuang XD (2017) Robust modeling method for thermal error of CNC machine tools based on ridge regression algorithm. Int J Mach Tools Manuf. 113:35–48
Zhang S, Cheng Y, Huan C, Lin Z (2019) Systematic comparisons of exit air temperature and wall temperature for modelling non-uniform thermal environment of stratum ventilation. Build Environ. 149:120–133
Zimmermann N, Lang S, Blaser P, Mayr J (2020) Adaptive input selection for thermal error compensation models. CIRP Annals 69(1):485–488
Ma C, Zhao L, Mei X, Shi H, Yang J (2017) Thermal error compensation based on genetic algorithm and artificial neural network of the shaft in the high-speed spindle system. Proc IME B J Eng Manufact. 231(5):753–767
Kang CM, Zhao CY, Liu K, Li TJ, Yang B (2018) Comprehensive compensation method for thermal error of vertical drilling center. Trans Can Soc Mech Eng. 43(1):92–101
Li F, Li T, Jiang Y, Wang H, Ehmann KF (2019) Explicit error modeling of dynamic thermal errors of heavy machine tool frames caused by ambient temperature fluctuations. J Manuf Process. 48:320–338
Miao E, Liu Y, Liu H, Gao Z, Li W (2015) Study on the effects of changes in temperature-sensitive points on thermal error compensation model for CNC machine tool. Int J Mach Tools Manuf. 97:50–59
Li Y, Zhang J, Su D, Zhou C, Zhao W (2018) Experiment-based thermal behavior research about the feed drive system with linear scale. Adv Mech Eng. 10(11):1687814018812359
Shi H, Ma C, Yang J, Zhao L, Mei X, Gong G (2015) Investigation into effect of thermal expansion on thermally induced error of ball screw feed drive system of precision machine tools. Int J Mach Tools Manuf. 97:60–71
Acknowledgements
The authors appreciate Dr. Liang Mi of China Academy of Engineering Physics for the outstanding suggestions and guidance on experimentation research during the manuscript preparation.
Funding
This paper was financially supported by the Young Scholars Development Fund of SWPU under grant no. 201499010023, the Key Technology R &D Program of Sichuan Province under grant no. 2020ZDZX0003, the Natural Science Foundation of Sichuan Province under grant no. 2022NSFSC2002, and the Key Technology R &D Program of Sichuan Province under grant no. 2017GZ0057.
Author information
Authors and Affiliations
Contributions
Yao Xiaopeng wrote the manuscript and established the experimental platform, Hu Teng and Wang Xiaohu conducted the theoretical modeling and all the data recording and analyses, Mi Liang provided the measuring instruments and offered suggestions and guidance on the experimentation stage, and Yin Guofu provided the engineering suggestions. All authors reviewed the final manuscript.
Corresponding author
Ethics declarations
Conflict of interest
The authors declare no competing interests.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Teng Hu and Xiaohu Wang contributed equally to this work.
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Xiaopeng, Y., Teng, H., Xiaohu, W. et al. Study on an approach for decoupling and separating the thermal positioning errors of machining center linear axes. Int J Adv Manuf Technol 128, 1139–1153 (2023). https://doi.org/10.1007/s00170-023-11877-1
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00170-023-11877-1