Avoid common mistakes on your manuscript.
Correction to: The International Journal of Advanced Manufacturing Technology
The original article contained a mistake.
Figure 15a was missing. The correct image is shown below:
Lateral spread curves for different roll crowns: a roll crown = -150μm; b roll crown = -100μm; c roll crown = -50μm; d roll crown = 0μm
The original article has been corrected.
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Peng, W., Chen, X., Wang, Q. et al. Correction to: Mathematical modeling and simulated analysis of metal flow behavior during the FGC of ESP rolling process. Int J Adv Manuf Technol 127, 5049–5050 (2023). https://doi.org/10.1007/s00170-023-11589-6
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00170-023-11589-6