Avoid common mistakes on your manuscript.
1 Correction to: The International Journal of Advanced Manufacturing Technology https://doi.org/10.1007/s00170-022-09614-1
The original article contained a mistake.
There are duplicate sentences found in Conclusion section. The correct paragraph is now shown below:
Conclusion:
-
3.
The technical advantage of the proposed spindle is mainly contributed to the water-lubricated hydrostatic thrust bearing, and the effect of eccentricity ratio on the temperature rise of the thrust bearing is not prominent when the eccentricity ratio is less than 0.5.
The original article has been corrected.
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Jiang, S., Lin, S. & Liu, F. Correction to: Thermal behavior of an improved face‑grinding spindle: water‑lubricated hydrostatic thrust bearing decreases temperature rise and increases axial stiffness. Int J Adv Manuf Technol 124, 4347 (2023). https://doi.org/10.1007/s00170-022-09747-3
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00170-022-09747-3