Skip to main content
SpringerLink
Log in

Dynamic modeling of milling and effect of tool path on machining stability

  • ORIGINAL ARTICLE
  • Published:
The International Journal of Advanced Manufacturing Technology Aims and scope Submit manuscript

Abstract

Regenerative stability theory predicts a set of optimal, stable spindle speeds at integer fractions of the natural frequency of the most flexible mode of the system. Being able to predict these phenomena therefore makes it easier to choose cutting conditions to increase productivity. The three-dimensional study of milling with a spherical tool has been done, and a part of complex shape, it is the continuation of our work previously published. Recently, several theoretical models have been developed for various applications, but there have been very few studies on the particular case of three-axis, complex shape milling. In this paper, it is planned to study the stability of milling operations with a hemispherical tool, using differential equations with delay terms. In this paper, based on the 3D study using a different model, new parameters are introduced in order to compare it with the 2D study of the paper previously published. For a 6061-T6 aluminum alloy part, the model is based on the method of discretization by delay terms of the dynamic equation. Our work has been devoted to have the machining stability lobes in 3D format, along the entire trajectory (discretized in several interpolation segments) of the tool for a flat, inclined (ascending or descending) and complex shaped surface.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11
Fig. 12
Fig. 13
Fig. 14
Fig. 15
Fig. 16

Similar content being viewed by others

References

  1. Pruvot F (1993) Conception et calcul des machines-outils–volume: Généralités, Morphologie, Plan général

  2. Altintas Y, Ber A (2001) Manufacturing automation: metal cutting mechanics, machine tool vibrations, and CNC design. Appl Mech Rev 54(5):B84–B84

    Article  Google Scholar 

  3. Chen C-K, Tsao Y-M (2006) A stability analysis of regenerative chatter in turning process without using tailstock. Int J Adv Manuf Technol 29(7):648–654

    Article  Google Scholar 

  4. Ertürk A, Özgüven H et al (2007) Effect analysis of bearing and interface dynamics on tool point FRF for chatter stability in machine tools by using a new analytical model for spindle–tool assemblies. Int J Mach Tools Manuf 47(1):23–32

    Article  Google Scholar 

  5. Li H, Dai Y et al (2019) Improved precise integration method for chatter stability prediction of two-DOF milling system. Int J Adv Manuf Technol 101(5):1235–1246

    Article  Google Scholar 

  6. Wu Y, You Y et al (2020) An implicit exponentially fitted method for chatter stability prediction of milling processes. Int J Adv Manuf Technol 106(5):2189–2204

    Article  Google Scholar 

  7. Altintaş Y, Budak E (1995) Analytical prediction of stability lobes in milling. CIRP Annals 44(1):357–362

  8. Liu Y, Wang X et al (2017) Experimental investigation into the effect of chatter on surface micro-topography of gears in grinding. Proc Inst Mech Eng C J Mech Eng Sci 231(2):294–308

    Article  Google Scholar 

  9. Ikkache K, Chellil A et al (2019) Study of dynamic behavior milling for an aluminum alloy part of type 6061–T6. Springer, International Symposium on Materials and Sustainable Development

    Google Scholar 

  10. Wan S, Jin X et al (2019) Effect of vibration assistance on chatter stability in milling. Int J Mach Tools Manuf 145:103432

    Article  Google Scholar 

  11. Wojciechowski S, Maruda R et al (2017) Optimisation of machining parameters during ball end milling of hardened steel with various surface inclinations. Measurement 111:18–28

    Article  Google Scholar 

  12. Plaza EG, López PN (2017) Surface roughness monitoring by singular spectrum analysis of vibration signals. Mech Syst Signal Process 84:516–530

  13. Wan M, Feng J et al (2017) Identification of milling process damping using operational modal analysis. Int J Mach Tools Manuf 122:120–131

    Article  Google Scholar 

  14. Seguy S, Dessein G et al (2008) Surface roughness variation of thin wall milling, related to modal interactions. Int J Mach Tools Manuf 48(3–4):261–274

    Article  Google Scholar 

  15. Shiota R, Furuki T et al (2016) Investigation of control methods of chatter vibration based on analysis of end-milling chatter mark. Trans Tech Publ, Advanced Materials Research

    Book  Google Scholar 

  16. Lei N, Soshi M (2017) Vision-based system for chatter identification and process optimization in high-speed milling. Int J Adv Manuf Technol 89(9):2757–2769

    Article  Google Scholar 

  17. Grossi N, Scippa A et al (2018) On the generation of chatter marks in peripheral milling: A spectral interpretation. Int J Mach Tools Manuf 133:31–46

    Article  Google Scholar 

  18. Wang C, Zhang X et al (2018) Milling stability prediction and adaptive chatter suppression considering helix angle and bending. Int J Adv Manuf Technol 95(9):3665–3677

    Article  Google Scholar 

  19. Zhang J, Liu C (2019) Chatter stability prediction of ball-end milling considering multi-mode regenerations. Int J Adv Manuf Technol 100(1–4):131–142

    Article  Google Scholar 

  20. Soni D, Desai K (2020) Gaussian approach–based cutting force coefficient identification for flat-end milling operation. Int J Adv Manuf Technol 110(11):3023–3034

    Article  Google Scholar 

  21. Li J, Kilic ZM et al (2020) General cutting dynamics model for five-axis ball-end milling operations. J Manuf Sci Eng 142(12):121003

    Article  Google Scholar 

  22. Fontaine M, Moufki A et al (2007) Modelling of cutting forces in ball-end milling with tool–surface inclination: part I: predictive force model and experimental validation. J Mater Process Technol 189(1–3):73–84

    Article  Google Scholar 

  23. Davies MA, Pratt JR et al (2002) Stability prediction for low radial immersion milling. J Manuf Sci Eng 124(2):217–225

    Article  Google Scholar 

  24. Fontaine M, Devillez A et al (2006) Predictive force model for ball-end milling and experimental validation with a wavelike form machining test. Int J Mach Tools Manuf 46(3–4):367–380

    Article  Google Scholar 

Download references

Funding

No funding was received for this work.

Author information

Authors and Affiliations

  1. Laboratory of Solids, Systems Mechanics, Faculty of Technology, M hamed Bougara University of Boumerdes, BP 35000, Boumerdes, Algeria

    Kamel Ikkache

  2. Dynamic Motor and Vibroacoustics Laboratory, Faculty of Technology, M hamed Bougara University of Boumerdes, BP 35000, Boumerdes, Algeria

    Ahmed Chellil, Samir Lecheb & Hamza Mechakra

Authors
  1. Kamel Ikkache
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Ahmed Chellil
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Samir Lecheb
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. Hamza Mechakra
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Ahmed Chellil.

Ethics declarations

Conflict of interest

  • Potential conflict of interest exists:

  • We wish to draw the attention of the Editor to the following facts, which may be considered as potential conflicts of interest and to significant financial contributions to this work:

  • The nature of potential conflict of interest is described below:

    • No conflict of interest exists.

    • We wish to confirm that there are no known conflicts of interest associated with this publication and there has been no significant financial support for this work that could have influenced its outcome.

Research ethics

We further confirm that any aspect of the work covered in this manuscript that hasΤ involved human patients has been conducted with the ethical approval of all relevant bodies and that such approvals are acknowledged within the manuscript.

Authorship

  • We confirm that the manuscript has been read and approved by all named authors;

  • We confirm that the order of authors listed in the manuscript has been approved by all named authors.

Additional information

Publisher's Note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Ikkache, K., Chellil, A., Lecheb, S. et al. Dynamic modeling of milling and effect of tool path on machining stability. Int J Adv Manuf Technol 121, 1769–1783 (2022). https://doi.org/10.1007/s00170-022-09399-3

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s00170-022-09399-3

Keywords

Search

Navigation