Abstract
For robotic machining, accurate and automatic inspection of finished surface is necessary for implementation in the site lapping process. Modern inspection systems based on smart sensor technology such as image processing and machine vision have been widely spread into many industries. These systems along with the smart factory concept not only enhance the inspection accuracy but also decrease human works substantially. In this paper, we propose a method for automatic levelling of machined surface with respect to roughness values, adopting specular light-based vision technique. The study mainly concerns the development of surface roughness levelling system associated with textural analysis related to surface topography. It is supported by the fundamental property of light reflection: reflection changes from diffuse to specular depending upon surface texture. A rough surface having tool marks produces contrast in grayscale values, resulting in the decrease of intensity value and vice versa. Image processing technique was adopted to find the underlying grayscale values of inspected surface. The result showed a nonlinear increase in grayscale values as roughness decreases. The highest image resolution can be achieved when surface normal corresponds to perspective center of camera, so the concept was extended for inclined and curved surfaces. To obtain high accuracy in precise measurements, a multiscale measuring method was developed for a wide range of roughness, which does not require an isolated system, but only change in camera distance for high-resolution measurement. The proposed technique showed surface roughness levelling with high accuracy and resolution up to 20 nm (Ra). The results indicate that this technique can be used for multiscale surface levelling of the free-form metal surfaces.
Similar content being viewed by others
Availability of data and material
All data generated or analyzed during this study are included in this published article.
References
Tadic B, Todorovic PM, Luzanin O, Miljanic D, Jeremic BM, Bogdanovic B, Vukelic D (2013) Using specially designed high-stiffness burnishing tool to achieve high-quality surface finish. Int J Adv Manuf Technol 11
Martínez SS, Ortega Vázquez C, Gámez García J, Gómez Ortega J (2017) Quality inspection of machined metal parts using an image fusion technique. Measurement 111:374–383
Wang Q, Wu Y, Li Y, Lu D, Bitoh T (2019) Proposal of a tilted helical milling technique for high-quality hole drilling of CFRP: analysis of hole surface finish. Int J Adv Manuf Technol 101(1):1041–1049
Mohammad AEK, Hong J, Wang D (2018) Design of a force-controlled end-effector with low-inertia effect for robotic polishing using macro-mini robot approach. Robot Comput Integr Manuf 49:54–65
Gong Y, Xu J, Buchanan RC (2018) Surface roughness: a review of its measurement at micro-/nano-scale. Physical Sciences Reviews 3(1)
Xie X (2008) A review of recent advances in surface defect detection using texture analysis techniques. ELCVIA: electronic letters on computer vision and image analysis 1–22
De Chiffre L, Lonardo P, Trumpold H, Lucca DA, Goch G, Brown CA, Raja J, Hansen HN (2000) Quantitative characterisation of surface texture. CIRP Ann 49(2):635–652
Dixson RG, Koening RGJ, Fu J, Vorburger TV, Renegar BT (2000) Accurate dimensional metrology with atomic force microscopy. Metrology, Inspection, and Process Control for Microlithography XIV 3998:362–368
Vacharanukul K, Mekid S (2005) In-process dimensional inspection sensors. Measurement 38(3):204–218
Persson A, Andersson M, Oden A, Sandborgh-Englund G (2006) A three-dimensional evaluation of a laser scanner and a touch-probe scanner. J Prosthet Dent 95(3):194–200
Kalt E, Monfared R, Jackson M (2016) Towards an automated polishing system: capturing manual polishing operations
Xu X, Hu H (2009) Development of non-contact surface roughness measurement in last decades. Int Conf Meas Technol Mechatron Autom 1:210–213
Diaz E, Thériault J-M (2018) Influence of surface roughness, volume diffusion and particle size in reflectance infrared spectroscopy. Algorithms and Technologies for Multispectral, Hyperspectral, and Ultraspectral Imagery XXIV 10644:106441K
Lu E, Liu J, Gao R, Yi H, Wang W, Suo X (2018) Designing indices to measure surface roughness based on the color distribution statistical matrix (CDSM). Tribol Int 122:96–107
Albers BJ, Schwendemann TC, Baykara MZ, Pilet N, Liebmann M, Altman EI, Schwarz UD (2009) Three-dimensional imaging of short-range chemical forces with picometre resolution. Nat Nanotechnol 4(5):307–310
Townsend A, Senin N, Blunt L, Leach R, Taylor JS (2016) Surface texture metrology for metal additive manufacturing: a review
Ravimal D, Kim H, Koh D, Hong JH, Lee S-K (2020) Image-based inspection technique of a machined metal surface for an unmanned lapping process. Int J Precis Eng Manuf-Green Technol 7(3):547–557
Park JG, Lee D-H, Kim H-S, Yeo W-J, Jeon M, Bae JY, Kim DU, Lee K-S, Kim G-H, Chang KS, Kim IJ (2021) Novel approach to Improve the optical performance by machining process without surface finishing. Int J Precis Eng Manuf-Green Technol
Fu S, Cheng F, Tjahjowidodo T (2020) Surface topography measurement of mirror-finished surfaces using fringe-patterned illumination. Metals 10(1):69
Krishnan BR, Vijayan V, Pillai TP, Sathish T (2019) Influence of surface roughness in turning process — an analysis using artificial neural network. Trans Can Soc Mech Eng
Gan J, Li Q, Wang J, Yu H (2017) A hierarchical extractor-based visual rail surface inspection system. IEEE Sens J 17(23):7935–7944
Zhang Y, Gibson GM, Hay R, Bowman RW, Padgett MJ, Edgar MP (2015) A fast 3D reconstruction system with a low-cost camera accessory. Sci Rep 5(1):10909
Manish R, Venkatesh A, Ashok SD (2018) Machine vision based image processing techniques for surface finish and defect inspection in a grinding process. Mater Today: Proc 5(2)12792–12802
Nguyen TP, Choi S, Park S-J, Park SH, Yoon J (2021) Inspecting method for defective casting products with Convolutional Neural Network (CNN). Int J Precis Eng Manuf-Green Technol 8(2):583–594
Liu Y, Yu F (2014) Automatic inspection system of surface defects on optical IR-CUT filter based on machine vision. Opt Lasers Eng 55:243–257
Le Bosse JC, Hansali G, Lopez J, Mathia T (1997) Characterisation of surface roughness by laser light scattering: specularly scattered intensity measurement. Wear 209(1):328–337
Peli E (1990) Contrast in complex images. J Opt Soc Am A JOSAA 7(10)2032–2040
Ragheb H, Hancock ER (2003) Rough surface estimation using the Kirchhoff model. Image Analysis 477–484
Haralick RM, Shanmugam K, Dinstein I (1973) Textural features for image classification. IEEE Transactions on Systems, Man, and Cybernetics, SMC 3(6)610–621
Shanmugamani R, Sadique M, Ramamoorthy B (2015) Detection and classification of surface defects of gun barrels using computer vision and machine learning. Measurement 60:222–230
Jansson DG, Rourke JM, Bell AC (1984) High-speed surface roughness measurement. J Eng Ind 106(1):34–39
Hu P, Zhou H, Chen J, Lee C, Tang K, Yang J, Shen S (2018) Automatic generation of efficient and interference-free five-axis scanning path for free-form surface inspection. Comput Aided Des 98:24–38
Kang D, Jang YJ, Won S (2013) Development of an inspection system for planar steel surface using multispectral photometric stereo. OE 52(3)039701
Acknowledgements
This research was supported by basic research (“NRF2018R1D1A1B0704949214”) of the National Research Foundation of Korea. The authors would also like to acknowledge support from Laser Micro/Nano Processing lab.
Funding
This research was supported by basic research (“NRF2018R1D1A1B0704949214”) of the National Research Foundation of Korea.
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Ethics approval
This article does not contain any studies with human participants or animals performed by any of the authors.
Consent to participate and publish
The authors declare that they participated in this paper willingly and give consent for the publication of this paper.
Conflict of interest
The authors declare no competing interests.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Dar, J., Ravimal, D., Lee, C. et al. Field surface roughness levelling of the lapping metal surface using specular white light. Int J Adv Manuf Technol 119, 2895–2909 (2022). https://doi.org/10.1007/s00170-021-08415-2
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00170-021-08415-2