Abstract
Stretch-forming based on loading at discrete points (SF-LDP) is a new stretch-forming process, by controlling the loading trajectory at each discrete point; the process can fulfill the sheet metal deformation along the prescribed forming path. In this paper, force-controlled SF-LDP process was proposed and discussed. The sheet metal deformations in SF-LDP were numerically analyzed and it is shown that the strains remain in a fixed ratio during the forming process and the three principal axes of strain are stationary and in the longitudinal, transverse, and thickness directions, respectively. Based on the characteristic analysis on the SF-LDP process, a precision design method for the loading trajectory described by stretch-forming force was presented, and the time course of the stretching force at each loading point is determined by taking into account the effect of material hardening and the friction between the sheet metal and stretch-forming die. A force-controlled SF-LDP process for a spherical surface part was designed and the loading trajectories were employed in the experiment, the measured results on the formed part demonstrate that the force-controlled SF-LDP process achieves qualified product without forming imperfections.
Similar content being viewed by others
References
Parris A (1996) Precision stretch forming for precision assembly. Ph.D. thesis, Department of Mechanical Engineering, Massachusetts Institute of Technology
Suri R, Otto K (1999) Variation modeling for a sheet stretch forming manufacturing system. CIRP Annals- Manufacturing Technology 48:397–400
Hardt DE, Norfleet WA, Valentin VM, Parris A (2001) In process control of strain in a stretch forming process. Transaction of the ASME Journal of Engineering Materials and technology 123:497–503
Peng JW, Li WD, Han JQ, Wan M, Meng B (2016) Kinetic locus design for longitudinal stretch forming of aircraft skin components. Int J Adv Manuf Technol 86:3571–3582
Anagnostou EL (2002) Optimized tooling design algorithm for sheet metal forming over reconfigurable compliant tooling. Ph. D. thesis, State University of New York at Stony Brook
Papazian JM (2002) Tools of change: reconfigurable forming dies raise the efficiency of small-lot production. Mech Eng 124:52–55
Cai ZY, Wang SH, Li MZ (2008) Numerical investigation of multi-point forming process for sheet metal: wrinkling, dimpling and springback. Int J Adv Manuf Technol 37(9–10):927–936
Cai ZY, Wang SH, Xu XD (2009) Numerical simulation for the multi-point stretch forming process of sheet metal. J Mater Process Technol 209:396–407
Wang SH, Cai ZY, Li MZ (2010) Numerical investigation of the influence of punch element in multi-point stretch forming process. Int J Adv Manuf Technol 49(5–8):475–483
Cai ZY, Li MZ (2006) A finite element method to generate digitized-die shape from the measured data of desired part. Int J Adv Manuf Technol 30(1–2):61–69
Siegert K, Rennet A, Fann KJ (1997) Prediction of the final part properties in sheet metal forming by CNC-controlled stretch forming. J Mater Process Technol 71:141–146
Siegert K, Fann KJ, Rennet A (1996) CNC-controlled segmented stretch-forming process. CIRP Annals Manufacturing Technology 45(1):273–276
Li MZ, Han QG, Fu WZ (2011) Study of a flexible stretch forming machine. Proc. 10th Int. Techn. Plast (ICTP 2011), Aachen, Germany, 655–658
Wang Y, Li MZ (2014) Research on three-dimensional surface parts in multi-gripper flexible stretch forming. Int J Adv Manuf Technol 71:1701–1707
Wang Y, Li MZ, Wang DM (2014) Modeling and numerical simulation of multi-gripper flexible stretch forming process. Int J Adv Manuf Technol 73:279–288
Park JW, Kim J, Kim KH, Kang BS (2014) Numerical and experimental study of stretching effect on flexible forming technology. Int J Adv Manuf Technol 73:1273–1280
Cai ZY, Wang M, Yang Z (2013) Numerical investigation on the process of stretch-forming based on discretely loading for spherical sheet metal parts. Adv Mater Res 816-817:682–685
Yang Z, Cai ZY, Che CJ, Li MZ (2016) Numerical simulation research on the loading trajectory in stretch forming process based on distributed displacement loading. Int J Adv Manuf Technol 82:1353–1362
Cai ZY, Yang Z, Che CJ, Li MZ (2016) Minimum deformation path sheet metal stretch-forming based on loading at discrete points. Int J Adv Manuf Technol 87:2683–2692
Peng HL (2013) Research on process and numerical simulation of flexible clamp stretch forming. Ph. D. thesis, Jilin University (in Chinese)
Author information
Authors and Affiliations
Corresponding authors
Rights and permissions
About this article
Cite this article
Cai, ZY., Liang, Xb., Yang, Z. et al. Force-controlled sheet metal stretch-forming process based on loading at discrete points. Int J Adv Manuf Technol 93, 1781–1789 (2017). https://doi.org/10.1007/s00170-017-0539-z
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00170-017-0539-z