Abstract
This paper presents the comparison of surface textures produced by high-precision cutting and abrasive processes on hardened steel parts. Investigations include surfaces generated by hard turning, belt grinding, and superfinishing (external honing) operations. As a result, several surfaces generated with different process kinematics and the Sa roughness parameter of about 0.05 μm were compared. Apart from the standard 2D and 3D roughness parameters, the fractal, motif, and frequency parameters were considered.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Jiang XJ, Whitehouse DJ (2012) Technological shifts in surface metrology. CIRP Ann Manuf Technol 61(2):815–836
De Chiffre L, Lonardo PM, Trumpold H, Lucca DA, Goch G, Brown CA, Raja J, Hansen HN (2000) Quantitative characterization of surface texture. CIRP Ann Manuf Technol 49(2):635–652
Lonardo PM, Trumpold H, De Chiffre L (1996) Progress in 3D surface microtopography characterization. CIRP Ann Manuf Technol 45(2):589–598
Tönshoff HK, Arendt C, Ben Amor C (2000) Cutting of hardened steel. CIRP Ann Manuf Technol 49(2):547–566
Klocke F (2011) Manufacturing processes 1. Cutting. Springer, Berlin
König W, Berktold A, Koch KF (1993) Turning versus grinding—a comparison of surface integrity aspects and attainable accuracies. CIRP Ann Manuf Technol 42(1):39–43
Davim JP (2011) Machining of hard materials. Springer, London
Klocke F, Brinksmeier E, Weinert K (2005) Capability profile of hard cutting and grinding processes. CIRP Ann Manuf Technol 54(2):557–580
Grzesik W, Rech J, Wanat T (2007) Surface finish on hardened bearing steel parts produced by superhard and abrasive tools. Int J Mach Tools Manuf 47:255–262
Grzesik W, Żak K (2012) Modification of surface finish produced by hard turning using superfinishing and burnishing operations. J Mater Process Technol 212:315–322
Griffiths B (2001) Manufacturing surface technology. Surface integrity and functional performance. Penton Press, London
Leach R (2013) Characterization of areal surface texture. Springer, Berlin
Michigan Metrology (2014) 3D surface roughness and wear measurements, analysis and inspection; Available at www.michmet.com
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Open Access This article is distributed under the terms of the Creative Commons Attribution License which permits any use, distribution, and reproduction in any medium, provided the original author(s) and the source are credited.
About this article
Cite this article
Grzesik, W., Rech, J. & Żak, K. Characterization of surface textures generated on hardened steel parts in high-precision machining operations. Int J Adv Manuf Technol 78, 2049–2056 (2015). https://doi.org/10.1007/s00170-015-6800-4
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00170-015-6800-4