Abstract
This paper proposes an analytical scheme for stability analysis in turning process by considering the motion of tailstock-supported workpiece using a compliance model of tool and work. A dynamic cutting force model based on relative motion between the cutting tool and workpiece is developed to study the chatter stability. Linear stability analysis is carried out in the frequency domain and the stability charts are obtained with and without considering workpiece flexibility. Variations of stability limits with workpiece dimensions and cutter position as well as the effects of cutting tool dynamics are studied and wherever possible results are compared with existing models. Experimental analysis is conducted on tailstock-supported workpiece to examine the correctness of the proposed stability model.
This is a preview of subscription content, log in via an institution to check access.
References
Tobias SA, Fishwick W (1958) The chatter on lathe tools under orthogonal cutting conditions. Trans ASME 80:1079–1088
Tobias SA (1961) Machine tool vibration. Wiley, New York
Merrit HE (1965) Theory of self-excited machine tool chatter. J Eng Ind Trans ASME 87:447–454
Tlusty J (1999) Manufacturing processes and equipment. Prentice Hall, Upper Saddle River
Altintas Y, Weck M (2004) Chatter stability of metal cutting and grinding. Ann CIRP 53:619–642
Chandiramani NK, Pothala T (2006) Dynamics of 2-DOF regenerative chatter during turning. J Sound Vibrat 290:448–464 doi:10.1016/j.jsv.2005.04.012
Dassanayake AV, Suh CS (2008) On nonlinear cutting response and tool chatter in turning operation. Com. Nonlinear Sc. Numer. Simulations 13:979–1001 doi:10.1016/j.cnsns.2006.08.003
Wang ZC, Cleghorn WL (2002) Stability analysis of spinning stepped-shaft workpieces in a turning process. J Sound Vibrat 250:356–367 doi:10.1006/jsvi.2001.3725
Ganguli A, Deraemaeker A, Preumont A (2007) Regenerative chatter reduction by active damping control. J Sound Vibrat 300:847–862 doi:10.1016/j.jsv.2006.09.005
Tarng YS, Hseih YW, Li TC (1996) Automatic selection of spindle speed for suppression of regenerative chatter in turning. Int J Adv Manuf Technol 11:12–17 doi:10.1007/BF01177179
Carrino L, Giorleo G, Polini W, Prisco U (2002) Dimensional errors in longitudinal turning based on the unified generalized mechanics of cutting approach, part-I; 3-D theory. Int J Mach Tools Manuf 42:1509–1515 doi:10.1016/S0890-6955(02)00117-7
Wang M, Fei R (1999) Improvement of machining stability using a tunable-stiffness boring bar containing an electrorheological fluid. Smart Mater Struct 8:511–514 doi:10.1088/0964-1726/8/4/309
Chen CK, Tsao YM (2006) A stability analysis of turning tailstock supported flexible work-piece. Int J Mach Tools Manuf 46:18–25 doi:10.1016/j.ijmachtools.2005.04.002
Chen CK, Tsao YM (2006) A stability analysis of regenerative chatter in turning process without using tailstock. Int J Adv Manuf Technol 29:648–654 doi:10.1007/s00170-005-2573-5
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Sekar, M., Srinivas, J., Kotaiah, K.R. et al. Stability analysis of turning process with tailstock-supported workpiece. Int J Adv Manuf Technol 43, 862–871 (2009). https://doi.org/10.1007/s00170-008-1764-2
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00170-008-1764-2