Abstract
In this study, drilling of polyimide (PI) film by using a 248 nm excimer laser through photomask projection is presented. The parameter effects of laser fluence, shot number and repetition rate on the processing results are realized. A high-quality of microhole array with 50 μm thick PI film has been fabricated. When the projection process is carried out, differences in the diameters of the microhole in the front and back sides of the PI are observed, which cause a conical shape in the kerf. The formation of this conical shape in terms of laser process parameters is discussed. Besides, to improve the laser machining quality of PI microholes, the effects of the process parameters are investigated and characterized. In addition, before excimer laser drilling PI is conducted, the PI surface is pre-coated with, or left without, a thin film material to observe the formation of debris. The results shows that the formation of debris can be reduced significantly when a pre-coated thin film is applied on the PI surface.
Similar content being viewed by others
References
Hoffmann M, Kopka P, Voges E (1999) Optical fibre switches based on full wafer silicon micromachining. J Micromech Microeng 9:151–155
Momma C, Nolte S, Chichkov B N, Alvensleben F, Tunnermann A (1997) Precise micromachining with femtosecond laser pulses. Laser Optoelektron 29(3):82
Ashkenasi D, Rosenfeld A, Varel H, Wahmer M, Campbell EEB (1997) Laser processing of sapphire with picosecond and sub-picosecond pulses. Appl Surf Sci 120:65–80
Kruger J, Kautek W, Lenzer M, Sartania S, Spielmann C, Krausz F (1998) Laser micromachining of barium aluminum borosilicate glass with pulse durations between 20fs and 3ps. Appl Surface Sci 127–129:892–898
Ameer-Beg S, Perrie W, Rathbone S, Wright J, Weaver W, Champoux H (1999) Femtosecond laser microstructuring of materials. Appl Surf Sci 127–129:875
Bednarczyk S, Bechir R, Baclet P (1999) Laser micro-machining of small objects for high-energy laser experiments. Appl Phys A-Mater 69:S495–S500
Simon P, Ihlemann J (1996) Machining of submicron structures on metals and semiconductors by ultrashort UV-laser pulses. Appl Phys A 63:505
Ihlemann J, Wolf-Rottke B (1996) Excimer laser micro machining of inorganic dielectrics. Appl Surf Sci 106:282–286
Zergioti I, Mailis S, Vainos NA, Fotakis C, Chen S, Grigoropoulos CP (1998) Microdeposition of metals by femtosecond excimer laser. Appl Surf Sci 127–129:601–605
Leidinger D, Penz A, Schuocker D (1995) Improved manufacturing processes with high power lasers. Infrared Phys Technol 36:251–266
Rabello MS, White JR (1997) Crystallization and melting behaviour of photodegraded polypropylene: I. Chemi-Crystallization, Polymer 38:6379–6387
Bauerle D (1996) Laser processing and chemistry. Springer, Berlin Heidelberg New York, pp 191–207
Rubahn HG (1999) Laser applications in surface science and technology. Wiley, New York
Srinivasan R (1993) Appl Phys A 56A:417–423
Zhang Y, Lowe RM, Harvey E, Hannaford P, Endo A (2002) High aspect-ratio micromachining of polymers with an ultrafast laser. Appl Surf Sci 186:345–351
Gunji M, Nakanishi H, Washizu M (2005) Local in-situ hydrophilic treatment of micro-channels using surface discharge. 2005 international conference on solid state sensors, actuators and microsystems, Seoul, South Korea, pp 1187–1190
Oki A, Ogawa H, Nagai M, Shinbashi S, Takai M, Yokogawa A, Horiike Y (2004) Development of healthcare chips checking life-style-related diseases. Mater Sci Eng 24(6–8):837–843
Furuess RJ, Tsao TC, Rankin JS, Muth MJ, Manes KW (1999) Torque control for a form tool drilling operation. IEEE Trans Control Syst Technol 7:22–30
Dupont A, Caminat P, Bournot P, Gauchon JP (1995) Enhancement of material ablation using 248, 308, 532, 1064 nm laser pulse with a water film on the treated surface. Appl Phys 78:2022–2028
Williams SW, Marsden PJ (1996) New laser drilling techniques for porous surfaces. Second European forum on laminar flow technology, Bordeaux, France, June 1996
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Pan, C.T., Yang, H. & Wei, M.K. 248 nm excimer laser drilling PI film for nozzle plate application. Int J Adv Manuf Technol 34, 889–897 (2007). https://doi.org/10.1007/s00170-006-0653-9
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00170-006-0653-9