Abstract
To demonstrate the efficacy of the vacuum pressure impregnation (VPI) with commercial wood preservative products to eliminate the quarantine organism, pinewood nematode (PWN), Bursaphelenchus xylophilus, and other nematodes from maritime pine (Pinus pinaster) wood, in vitro assays and industrial assays in horizontal industrial autoclave tanks were conducted. In vitro nematicidal activity assays through direct exposure of the PWN 3rd-stage dispersal juveniles, the resistance juvenile stage, extracted from naturally infected P. pinaster revealed 100% nematode mortality with three commercial wood preservatives. Nematode mortality was also assessed in VPI industrial assays with the three commercial wood preservatives using naturally PWN infected P. pinaster experimental units, with various diameters and sizes. After VPI treatment, the nematode mortality ranged from 99.9761 to 100%. After incubation, the mortality of the total number of nematodes increased and, in all sections, the nematode mortality was higher than 99.9981% and in some it was 100% indicating that wood impregnated with preservative products does not constitute an environment favorable to the reproduction and development of nematodes. Overall, our findings demonstrated that the efficiency of the VPI process results from the joint action of the physical effect of pressure and vacuum and of the nematicidal effect of the preservative product. VPI treatment can be considered a valuable approach to eliminate PWN and other nematodes from maritime pine wood avoiding the subsequent application of the heat treatment.
Similar content being viewed by others
1 Introduction
The introduction of quarantine pathogens into non-native areas has led to the development and application of quarantine procedures worldwide. Research has been conducted to develop phytosanitary methods to guard against the introduction and spread of these organisms. Presently, numerous pathogenic organisms are transported around the world through the international trade of wood and wood by-products. Some of these organisms are responsible for major economic losses and have also caused significant ecological impacts in forested areas. The pinewood nematode (PWN), Bursaphelenchus xylophilus (Steiner and Bührer, 1934) Nickle, 1970 (Nickle et al. 1981), the causal agent of the pine wilt disease (PWD), is one of these pathogens considered a A2 quarantine organism by the European and Mediterranean Plant Protection Organization (EPPO) and responsible for great losses in coniferous forests (EPPO 2013, 2022).
Since the international transport of wood and wood packaging material has been recognized as one of the most important means for PWN dispersion to non-affected areas, the International Plant Protection Convention (IPPC) has adopted technical requirements for the treatment of wood and wood packaging material (crates, boxes, packing cases, dunnage, pallets, cable drums and spools/reels) following the International Standards for Phytosanitary Measures No. 15 (ISPM 15). This standard describes phytosanitary measures that reduce the risk of introduction and spread of quarantine pests associated with the movement in international trade and establishes the basis for the harmonization of international phytosanitary measures, specifying the treatments for quarantine organisms that are harmful to forests, namely the PWN (FAO 2013).
According to the ISPM 15, all wood packaging material must be subjected to heat treatment (HT), microwave dielectric heating, fumigated with methyl bromide (restricted in many countries) or sulfuryl fluoride. The HT is the most widely used process worldwide and is conducted in industrial heat chambers with the requirement that the wood, including its core, reaches a minimum of 56 °C for 30 continuous minutes (FAO 2013). Nevertheless, the IPPC identified the need to develop and implement alternative treatments. Wood impregnation under vacuum pressure impregnation (VPI) with commercial wood preservative products, used worldwide for wood protection against wood decay organisms (insects, fungi, bacteria), can be effective to eliminate PWN from wood at industrial scale, eliminating the posterior use of HT. This impregnation process permits: (i) durability; (ii) deep penetration of the preservative product; (iii) controlled treatment conditions and (iv) processes adapted to industrial and large-scale production. Most of the wood is impregnated in industrial treatment autoclave tanks by a process called full-cell process or Bethell Method. In this process, the preservative product is applied by vacuum and pressure cycles and the wood cells are filled with the impregnation agent to receive the largest possible amount of preservative product inside the wood (Lebow and Anthony 2012; Kirker and Lebow 2021).
In Europe, chemicals used for wood preservation must be approved and validated by the European Chemicals Agency (ECA) and within this agency there are chemicals approved with different applications and toxicities. Nowadays, most of the commercial brands are composed of a mixture of different substances, including biocides, fungicides, and bactericides.
Data on the effectiveness of the wood impregnation process with a commercial preservative product by vacuum and pressure in the elimination of PWN and other nematodes (100% of mortality) have already been achieved in an industrial assay performed with naturally infected trunks with 15 cm diameter (Fonseca et al. 2017). In addition, in vitro laboratory assays conducted with several commercial wood preservatives using PWN inoculated wood blocks also revealed effectiveness in the PWN elimination, concluding that wood impregnated with preservative products does not represent a risk for PWN dissemination (Arcos et al. 2015).
In Portugal, since 1999, when the PWN was reported, in Pinus pinaster Aiton, in the Setúbal Peninsula (Mota et al. 1999), all industrial wood impregnation companies have faced a problem. All wood impregnated with preservative products used for sleepers, poles, fences, shingles, decking, cladding, windows, log cabins, and many other applications also need to be subjected to an additional HT, to comply with the requirements of the ISPM 15, increasing costs and production time. In view of this situation, and exploring the scientific results already reported, a multidisciplinary working group was created to evaluate the efficacy of wood impregnation treatment by pressure and vacuum with preservative products in the elimination of PWN and other nematodes from maritime pine wood. This working group, led by the Associação das Indústrias de Madeira e Mobiliário de Portugal (AIMMP), is composed of nematologists, wood technicians and industrial wood impregnation companies.
The main objectives of this working group were to evaluate the nematicidal activity of commercial wood preservative products and, to assess the effectiveness of the VPI treatment with different preservative products in the elimination of PWN and other nematodes from P. pinaster wood.
2 Materials and methods
2.1 Selection of trunks naturally infected with PWN
Fifty declining P. pinaster trees were identified and their trunks debarked and stored. Only the trunks with diameter, at least at one of the ends (base or top) equal or greater than 25 cm, corresponding to the highest diameter of the trunks treated in the companies, were selected for the extraction, identification, and quantification of PWN and other nematodes. Circular sections, 2–3 cm thick, were sawed from each end of each trunk, and 100 g of wood from each section was sampled and nematodes extracted using the tray method (Whitehead and Hemming 1965; EPPO 2013). The identification of PWN was based on female and male morphological diagnostic characters (female tail terminus shape, vulval flap presence and male spicules) (EPPO 2013, 2022). The identification of the other nematodes was based on the main morphological characters (anterior end, stylet, vulva, spicules, posterior end) and followed the nematode classification by Hodda (2022). The quantification of B. xylophilus and other nematodes was carried out under an inverted stereoscopic microscope.
The number of B. xylophilus/g of wood was calculated to verify whether this number was between 100 and 20 000/g of wood and with more than 60% of 3rd -stage dispersal juveniles (JIII), according to the technical requirements for the development and validation of wood treatments (Magnusson and Schröder 2009). Then, the selected trunks (6) with a high density of PWN (more than 100 PWN/g) were stored at the industrial companies in a covered and dry location to reach the optimum moisture content for impregnation (approximately 25%). The wood moisture content in each trunk was measured in three spots using a digital wood moisture meter (Gann HT65, Germany), and the wood moisture content of each trunk was estimated by using the average of three measurement values. When the trunks reached the optimal moisture content value to impregnate the wood in an autoclave, only three trunks (Trunks 4, 6 and 8) displayed a high population density of PWN and other nematodes. The trunks 4, 6 and 8 were then used in the industrial assays.
2.2 Wood preservatives
Three copper-based preservative products (Table 1) were supplied by the three companies where the industrial wood impregnation assays were performed. The preservative concentrations and retention values used in the industrial assays were the ones applied routinely in the three companies for exterior timbers used in permanent contact with ground or fresh water (Class 4SP) (Table 1).
2.3 Nematicidal activity of preservative products- in vitro assays
The nematicidal activity of the three preservative products was assessed in three in vitro laboratory assays. through direct exposure of JIII nematodes extracted from naturally infected P. pinaster wood. This juvenile stage is the most common developmental stage in naturally infected wood and considered the most resistant stage (EPPO, 2022).
After extracting the nematodes from the wood, using the tray method (EPPO 2013), the aqueous suspension was observed under an inverted stereoscopic microscope and the JIII were separated.
Each treatment consisted of five replicates, with tap water used as a control. In each of the replicates, 1 mL of the preservative product was used with the concentration applied in the impregnation (preservative X − 4.3%; preservative Y − 5%; preservative Z − 5.8%), in each of the companies. The product was transferred to excavated glass blocks and kept in a humid chamber, in the dark, during the assay. Twenty JIII were transferred to five glass blocks/treatment, corresponding to 100 nematodes/treatment, and nematode mortality was monitored. Nematodes that were distended and showed no movement when touched with the eyelash were transferred to tap water and considered dead only when, after one hour, no movement was detected (Esteves et al. 2017; Maleita et al. 2017).
In the 1st assay, the treatments were carried out with the three preservative products, supplied by the companies, and nematode mortality was monitored and quantified at 0, 2, 4, 6, 8, 10, 12 and 14 h. In the 2nd assay, nematode mortality, after exposure to the preservative products X and Y, was monitored and quantified after 30, 60, 75, 90 and 120 min, since that, in the 1st assay, the 1st observation was only performed after 2 h of exposure to the preservatives, where 100% mortality was detected. In the 3rd assay, to confirm the nematicidal effect of the three preservative products, photographic records of PWN (mixed developmental stages) directly extracted from infected wood were obtained after 30 min of exposure to each of the preservative products, using a stereoscopic microscope with a digital camera (Leica M80, IC80 HD, Leica Microsystems, Germany).
2.4 Industrial assays
Trunk 4 was selected to be used with water impregnation and named W4. Trunk 6 that had a high diameter corresponding to a high weight and number of nematodes was divided in half. One of the halves was used in the impregnation assay with the preservative product X and designated as X6. The other half, designated as Y6, was used in the impregnation assay with the preservative product Y. Trunk 8 was used in the impregnation assay with the preservative product Z and named as Z8.
Afterwards, the trunks W4, X6, Y6 and Z8 were divided into two sections (W4-T/W4-B, X6-T/X6-B, Y6-T/Y6-B and Z8-T/Z8-B), representative of the top (T) and of the base (B). The two sections of each trunk were divided again to obtain four experimental units/treatment (W4-T1, W4-T2, W4-B1, W4-B2; X6-T1, X6-T2, X6-B1, X6-B2; Y6-T1, Y6-T2, Y6-B1, Y6-B2 and Z8-T1, Z8-T2, Z8-B1, Z8-B2), which were measured, weighed, and used as replicates. To estimate the number of nematodes in each experimental unit, before treatment, a slice approximately 3–4 cm thick, of the corresponding sections, was removed and weighed. The nematodes were extracted, identified, and quantified as described above. The number of nematodes (B. xylophilus and other nematodes) was estimated/100 g of wood. Before each assay, the moisture content in each of the experimental units was determined as described before.
Then, the four naturally infected experimental units were introduced into industrial autoclaves for VPI with water and the preservative products X, Y and Z, at room temperature (Fig. 1). In the case of VPI with water, the experimental units were introduced into an empty autoclave (Fig. 1a). In the case of the preservative products, the experimental units were introduced together with wooden posts included in a real treatment (Fig. 1b-d).
2.5 VPI treatment conditions
The VPI treatments with water and with the three preservative products were carried out in horizontal industrial autoclaves at room temperature under vacuum and pressure, being the treatment cycles pre-defined and programmed according to the specifications of the companies where the treatments were conducted (Table 2).
2.6 Nematode extraction and quantification after VPI treatment
After VPI, the four impregnated experimental units were removed from the industrial autoclave, left to drain for 3 days. Each of the four experimental units/treatment was divided into two obtaining eight experimental units/treatment. These units were cut into slices of approximately 3–4 cm, placed in plastic bags, labelled, and transported to the NEMATO-lab for extraction, identification, and quantification of nematodes. Four experimental units were analysed two to five days after the VPI treatment and four after incubation for 21 days at 20–25 ºC to allow for the hatching of the juveniles and/or reproduction of nematodes (EPPO 2013; Bonifácio et al. 2014; Fonseca et al. 2017). In the case of VPI with water, the extraction, identification, and quantification of nematodes after incubation were not conducted as the number of nematodes recovered from the VPI treated wood was high.
The initial number of nematodes in each of the eight experimental units was estimated considering the weight and the total number of nematodes existing in each of the experimental units before treatment. After the VPI treatment and after the incubation period, the respective slices were cut into small pieces of wood (no larger than 1 cm in width, using a grafting scissor), and the nematodes were extracted, identified, and quantified as previously described.
2.7 Data analyses
In the in vitro assays, data on nematicidal activity of the three preservative products were converted to corrected mortality percentage, corrected by Schneider Orelli’s formula with reference to water, used as experimental control (Schneider-Orelli 1947):
The effects of the three preservative products on nematode mortality in in vitro assays were compared in one-way analysis of variance (ANOVA) followed by post-hoc Fisher’s least significant difference (LSD) statistical test.
In the industrial assays, nematode mortality percentage with the water and with the three preservative products was calculated directly using the following formula:
In this case, the mortality was not corrected with reference to water, because the water was considered as treatment.
The % of mortality of the different VPI treatments was compared statistically based on one-way analysis of variance (ANOVA) followed by post-hoc Fisher’s LSD statistical test. Statistical analyses of the data were performed using SPSS Statistics version 26.0 for Windows.
3 Results
3.1 Nematicidal activity of preservative products- in vitro assays
In the 1st assay, the results revealed that the three preservative products have nematicidal properties, with 100% mortality being obtained with the three preservatives. However, the effectiveness of nematicidal activity was higher with X and Y, with 100% mortality after 2 h of exposure. For Z, 100% mortality was only achieved after 14 h of exposure (Fig. 2).
In the 2nd assay, it was possible to detect differences in the nematicidal activity of the two preservatives (X and Y). With the preservative X, 100% mortality was achieved after 2 h of exposure, but with Y, 100% mortality was reached after 30 min of exposure (Fig. 3).
In the 3rd assay, 100% mortality was detected in nematodes exposed to preservative Y after 30 min of exposure (Fig. 4c), as in the previous assay, while in preservative X most were dead and some were still alive with the snaking movement, characteristic of nematodes (Fig. 4b). Contrary, in the preservative Z, most of the nematodes were alive and showing movement (Fig. 4d), and in the control all nematodes were alive (Fig. 4a).
3.2 Industrial assays
3.2.1 Water VPI treatment
In the treatment with water, the identification and quantification of nematodes (B. xylophilus and other nematodes)/100 g of wood before and after the treatment are shown in Table 3, being the number of B. xylophilus before treatment found to be greater than 10 000 nematodes/100 g of wood, corresponding to more than 100 nematodes/g according to the technical requirements for the development and validation of wood treatments and targeting the density of at least 100 000 nematodes/experimental unit (Follett and Neven 2006; Magnusson and Schröder 2009; Schröder et al. 2009; Haack et al. 2011; Schortemeyer et al. 2011; Bonifácio et al. 2014). Other nematodes belonged to the orders Rhabditida and Panagrolaimida, including nematodes from families Rhabditidae, Aphelenchoididae and Aphelenchidae were found (Hodda 2022). The results revealed that the percentage of elimination of B. xylophilus ranged from 77.82 to 84.81% and the percentage of elimination of the total number of nematodes ranged from 80.2 to 87.84% (Table 3).
3.2.2 Preservative X VPI treatment
The number of nematodes (B. xylophilus and other nematodes) was estimated/100 g of wood, and it was found that the number of JIII in the four experimental units was higher than 74% (X6-T1–74.3%, X6-T2–75.9%, X6-B1–77.9%, X6-B2–78%). Despite the number of B. xylophilus being higher than 10 000 nematodes/100 g of wood, only in one of the experimental units, the total number of nematodes/experimental units exceeded largely the 100 000 nematodes (data not shown). Nematodes (B. xylophilus and other nematodes) identification and quantification was carried out as described previously. The results of nematodes identification and quantification in the sections of the experimental units after VPI (X6-T1A, X6-T2A, X6-B1A, X6-B2A), after incubation (X6-T1B, X6-T2B, X6-B1B, X6-B2B) and the respective mortality percentages are shown in Tables 4 and 5, respectively.
After VPI treatment and after an incubation period, 100% mortality was not attained in all experimental units as some live nematodes were still detected.
After treatment, the mortality of the total number of nematodes (B. xylophilus and other nematodes) in the four sections (X6-T1A, X6-T2A, X6-B1A, X6-B2A) was higher than 99%, however only two of them (X6-T1A, X6-T2A) exceeded 99.9968% as required for treatment validation according to Probit 9 requirements (Table 4). After incubation, the mortality of the total number of nematodes increased and, in all experimental unit sections (X6-T1B, X6-T2B, X6-B1B, X6-B2B) it was higher than 99.9968%, and in one of them (X6-T2B) it was 100% (Table 5). It should be noted that, in the incubated sections, despite the detection of some live nematodes, there was no growth in the population, with a decrease in the number of nematodes.
3.2.3 Preservative Y VPI treatment
In this treatment, as in the previous one, it was found that the number of JIII in the four experimental units was higher than 74% (Y6-T1–79.3%, Y6-T2–74.9%, Y6-B1–77.8%, Y6-B2–80.7%). As in the previous industrial assay and although the number of B. xylophilus higher than 10 000 nematodes/100 g of wood was not detected in any of the experimental units (data not shown), the total number of nematodes in each of the experimental units exceeded largely 100 000 nematodes (Table 6).
Nematodes (B. xylophilus and other nematodes) identification and quantification were carried out as described previously. The results of nematodes identification and quantification in the sections of the experimental units after VPI (Y6-T1A, Y6-T2A, Y6-B1A, Y6-B2A) and after incubation (Y6-T1B, Y6-T2B, Y6-B1B, Y6-B2B) and the mortality percentages are shown in Tables 6 and 7, respectively. After VPI treatment and after the incubation period, 100% mortality was not achieved in all experimental units. After VPI and after the incubation period some live nematodes were still detected. After treatment, the mortality of the total number of nematodes (B. xylophilus and other nematodes) in the four experimental unit sections (Y6-T1A, Y6-T2A, Y6-B1A, Y6-B2A) was higher than 99.9968%, and in one of the sections (Y6-B2A) 100% (Table 6). After incubation, the mortality of the total number of nematodes increased in all sections (Y6-T1B, Y6-T2B, Y6-B1B, Y6-B2B) and it was higher than 99.9968%, and in two of them (Y6-T2B and Y6-B1B) it was 100% (Table 7). Similar to the assay with the preservative product X, there was no growth in the nematode population, after incubation.
3.2.4 Preservative Z VPI treatment
The number of nematodes (B. xylophilus and other nematodes) was estimated/100 g of wood, and the number of JIII in the four experimental units was higher than 63% (Z8-T1–64%, Z8-T2–68.1%, Z8-B1–63.6%, Z8-B2–67.2%). However, the number of B. xylophilus higher than 10 000 nematodes/100 g of wood was only detected in one of the experimental units (data not shown), but the total number of nematodes in each of the experimental units exceeded 100 000 nematodes. Nematodes (B. xylophilus and other nematodes) identification and quantification were carried out as described previously. The results of nematodes identification and quantification in the sections of the experimental units after VPI (Z8-T1A, Z8-T2A, Z8-B1A, Z8-B2A) and after incubation (Z8-T1B, Z8-T2B, Z8-B1B, Z8-B2B) and the respective percentages of mortality are indicated in Tables 8 and 9.
The results with the preservative product Z revealed that, after VPI and after the incubation period, 100% mortality was not achieved in all experimental units. After the treatment and after the incubation period some live nematodes were detected (Tables 8 and 9).
After VPI treatment, the % mortality of the total number of nematodes (B. xylophilus and other nematodes) in the four sections (Z8-T1A, Z8-T2A, Z8-B1A, Z8-B2A) was higher than 99%, however only two of them (Z8-T2A and Z8-B2A) exceeded 99.9968% (Table 8). After incubation, the mortality of the total number of nematodes increased and, in all sections (Z8-T1B, Z8-T2B, Z8-B1B, Z8-B2B), it was higher than 99.9968%, being in one of them (Z8-T2B) 100% (Table 9). It should be highlighted that in the incubated sections, as in the assays carried out with the preservative products X and Y, despite the detection of some live nematodes, no population growth was observed.
The means of the percentage of mortality of the total number of nematodes (PWN + other nematodes), of the four experimental units, in each VPI assay, after treatment and after the period of incubation (Table 10) revealed that the VPI assay with the preservative Y was the most effective, after treatment and after incubation, with means of percentage of mortality of 99.9995 and 99.9998, respectively. In the other VPI assays, with the preservatives X and Z, the means of percentage of mortality were lower than 99.9968% after the treatment. However, after the incubation, the percentage increased to 99.9996% and 99.9991%. Despite these differences, the differences found among the three assays were not statistically significant (p > 0.005) (Table 10).
4 Discussion
The in vitro assays, through direct exposure of JIII nematodes, the resistance juvenile stage, extracted from naturally infected wood indicated that the three preservative products have a strong nematicidal activity. However, the most effective preservative product was the product Y. This preservative product induced the mortality of all nematodes in only 30 min of direct exposure to the product. With the product X, 100% mortality was achieved after 2 h of exposure and the product Z was the least effective, with 100% mortality only obtained after 14 h of exposure. Differences in nematicidal activity may be attributed to the chemical composition of each of the preservatives. The preservative product Y has a higher percentage of ammonium in the propionate form of didecylmethylpoly (oxyethyl) ammonium and in dissolved copper in the form of basic copper carbonate. Several studies have already demonstrated the nematicidal activity of compounds rich in ammonium (Oka and Pivonia 2002; Oka et al. 2007; Renco et al. 2011; Wei et al. 2012; Su et al. 2015) and copper (Eloh et al. 2016; Mohamed et al. 2019; Yeon et al. 2019; Akhter et al. 2020) against plant-parasitic nematodes mainly belonging to the genera Globodera (potato cyst nematodes) and Meloidogyne (root knot nematodes). Regarding the PWN, Shoji (1985) showed the efficient eradication of the PWN in pine logs by application of metam-ammonium. Additionally, the effects of in vitro exposure to different concentrations of copper sulphate on the mortality and movement behaviour were evaluated, and the results proved that copper sulphate had strong effects at a low concentration (5 mg/L), revealing that copper sulphate is effective against PWN restricting their harmful effects on plants by increasing mortality and by inhibiting their movement (Tan et al. 2013).
In the industrial assays, conducted in horizontal industrial autoclaves, water (W) and wood preservatives (X, Y and Z) as impregnating agents, PWN naturally infected maritime pine trunks were used. In the 1st assay with water, it was verified that the elimination of B. xylophilus and other nematodes ranged from 77.82 to 87.84% (Table 3). Although there was not 100% elimination of nematodes, these results permitted to conclude that the physical action of vacuum and pressure has effect on the mortality of nematodes inside the wood. A previous laboratory study performed with naturally PWN infected wood sections (75 mm long/20 mm width) and with wood shavings revealed that high pressures (5 and 15 MPa) had effects on the survival of PWN inside the wood, and a pressure of 30 MPa caused 100% mortality (Fonseca et al. 2014), while in the industrial assays, carried out with the three preservative products, the maximum pressure used was lower (1.2 MPa).
In the VPI, with the preservative product Y, the time for pressure impregnation was 45 min, and the time used in each vacuum step was 35 min, and despite the greater diameter of the experimental units, the mortality of the total number of nematodes was higher than 99.9968% in all the sections (after treatment and after incubation) and with means of percentage of mortality of 99.9995 and 99.9998, respectively. Regarding the two other assays with the preservative products X and Z, the total time for pressure impregnation was much higher (75 min) and the time used for each vacuum step was lower (15 min). In these cases, after treatment, the mortality of the total number of nematodes, in the four sections analysed/treatment was higher than 99%, however two of them (X6-T1A, X6-T2A and Z8-T2A, Z8-B2A) exceeded 99.9968% (Tables 4 and 8). After incubation, with both preservatives, the mortality of the total number of nematodes was higher than 99.9968%, having increased in all sections (Tables 5 and 9). In these two VPI assays, the means of percentage of mortality were lower than 99.9968% after the treatment, but after the incubation the percentage increased to 99.9996% and 99.9991% (Table 10). Overall, these results indicate a greater efficacy of the VPI with the preservative product Y in the nematode mortality in all sections analysed (Tables 6, 7 and 10). In all VPI treatments with the three preservative products, after the incubation period, the percentage of mortality of the total number of nematodes was higher than 99.9968% in all experimental units, requirement for treatment validation, and in some of them it was 100%. Previous assays performed with the preservative Z revealed 100% efficacy in experimental units with 15 cm in diameter after treatment and incubation (Fonseca et al. 2017). The detection of live nematodes in a few experimental units could be due to disparities in the preservative product impregnation through all sapwood in the different experimental units. In order to improve the efficacy of the treatment, conditions (pressure, vacuum, and time) could be adjusted. In the VPI assays, the greater mortality with the preservative Y, corroborates the results obtained in the in vitro assays.
5 Conclusion
This study demonstrated the efficiency of the VPI with commercial wood preservative products to eliminate PWN and other nematodes from naturally infected wood. The efficiency of this wood impregnation process is dependent on the diameter of the wood, moisture content, preservative product, product concentration and vacuum/impregnation pressure and time and results from the joint action of the physical effect of pressure and vacuum and the nematicidal effect of the preservative product. Moreover, it should be highlighted that in the incubated experimental wood units with the three preservative products, there was no growth in the nematode population, with a decrease in the number of nematodes, suggesting that impregnated wood does not constitute an environment favourable for the development and reproduction of nematodes. Overall, our findings indicate that the physical action of vacuum and pressure plus the action of the preservative products clearly induce the nematode mortality inside the wood and that this process eliminates PWN and other nematodes from maritime pine wood at industrial scale, eliminating the need of a posterior use of the heat treatment.
References
Akhter G, Khan A, Ali SG, Khan TA, Siddiqi KS, Khan HM (2020) Antibacterial and nematicidal properties of biosynthesized Cu nanoparticles using extract of holoparasitic plant. SN Appl Sci 2:1268. https://doi.org/10.1007/s42452-020-3068-6
Arcos SC, Robertson L, Conde M, Llinares F, Navas A, Troya MT (2015) Efficacy of comercial wood preservatives against Bursaphelenchus xylophilus, a quarantine organism in Europe. Eur J Wood Prod 73:643–649. https://doi.org/10.1007/s00107-015-0933-x
Bonifácio LF, Sousa E, Naves P, Inácio ML, Henriques J, Mota M, Barbosa P, Drinkall MJ, Buckley S (2014) Efficacy of sulfuryl fluoride against the pinewood nematode, Bursaphelenchus xylophilus (Nematoda: Aphelenchidae), in Pinus pinaster boards. J Integr Pest Manag 70:6–13. https://doi.org/10.1002/ps.3507
Eloh K, Demurtas M, Mura MG, Deplano A, Onnis V, Sasanelli N, Maxia A, Caboni P (2016) Potent nematicidal activity of maleimide derivatives on Meloidogyne incognita. J Agric Food Chem 64:4876–4881. https://doi.org/10.1021/acs.jafc.6b02250
EPPO (2013) P. M. 7/4 (3) Bursaphelenchus xylophilus. Bull OEPP/EPPO Bull 43:105–118
EPPO (2022) Bursaphelenchus xylophilus. EPPO datasheets on pests recommended for regulation. Available online. https://gd.eppo.int
Esteves I, Maleita C, Fonseca L, Braga M, Abrantes I, Sousa H (2017) In vitro nematicidal activity of naphthoquinones against the root-lesion nematode Pratylenchus thornei. Phytopathol Mediterr 56:127–132. https://doi.org/10.14601/Phytopathol_Mediterr-19314
FAO (2013) International standards for phytosanitary measures: guidelines for regulating wood packaging material in international trade. (Food and Agriculture Organization) ISPM No. 15. Rome, Italy
Follett PA, Neven LG (2006) Current trends in quarantine entomology. Annu Rev Entomol 51:359–385. https://doi.org/10.1146/annurev.ento.49.061802.123314
Fonseca L, Santos MD, Queirós RP, Abrantes I, Saraiva JA (2014) Laboratory tests on the elimination of the pinewood nematode (Bursaphelenchus xylophilus) in Pinus pinaster wood by high pressure. Eur J Wood Prod 72:825–827. https://doi.org/10.1007/s00107-014-0836-2
Fonseca L, Santos A, Amado S, Pedroso M, Abrantes I (2017) Industrial assay to assess the efficiency of vacuum pressure impregnation to eliminate the pinewood nematode from wood. Eur J Wood Prod 75:1–4. https://doi.org/10.1007/s00107-017-1192-9
Haack RA, Uzunovic A, Hoover K, Cook AJ (2011) Seeking alternatives to probit 9 when developing treatments for wood packaging materials under ISPM No. 15. Bull OEPP/EPPO Bull 41:39–45
Hodda M (2022) Phylum Nematoda: a classification, catalogue, and index of valid genera, with a census of valid species. Zootaxa 5114:1–289. https://doi.org/10.11646/zootaxa.5114.1.1
Kirker GT, Lebow ST (2021) Wood preservation. In: Ross RJ, Anderson JR (eds) Wood handbook: wood as an engineering material. General Technical Report FPL–GTR–282. Department of Agriculture, Forest Products Laboratory, Madison, WI, USA, pp 1–28
Lebow S, Anthony RW (2012) Guide for use of wood preservatives in historic structures, vol FPL–GTR–217. Forest Service, Forest Products Laboratory, pp 1–59
Magnusson C, Schröder T (2009) Technical protocol for testing nematodes during treatment development. IFQRG-2009-13:1–6
Mohamed AE, Elsharabasy SF, Abdulsamad D (2019) Evaluation of in vitro nematicidal efficiency of copper nanoparticles against root-knot nematode, Meloidogyne incognita.South Asian J Parasitol1–6
Mota MM, Braasch H, Bravo MA, Penas AC, Burgermeister W, Metge K, Sousa E (1999) First report of Bursaphelenchus xylophilus in Portugal and in Europe. Nematology 1:727–734. https://doi.org/10.1163/156854199508757
Maleita C, Esteves I, Chim R, Fonseca L, Braga MEM, Abrantes I, Sousa HC (2017) Naphthoquinones from walnut husk residues show strong nematicidal activities against the root-knot nematode Meloidogyne hispanica. ACS Sustain Chem Eng 5:3390–3398. https://doi.org/10.1021/acssuschemeng.7b00039
Nickle WR (1970) A taxonomic review of the genera of the Aphelenchoidae (Fuchs, 1937) Thorne, 1949 (Nematoda: Tylenchida). J Nematol 2:375–392
Nickle WR, Golden AM, Mamiya Y, Wergin WP (1981) On the taxonomy and morphology of pine wood nematode, Bursaphelenchus xylophilus (Steiner & Bührer, 1934) Nickle, 1970. J Nematol 13:385–392
Oka Y, Pivonia S (2002) Use of ammonia-releasing compounds for control of the root-knot nematode Meloidogyne javanica. Nematology 4:65–71. https://doi.org/10.1163/156854102760082212
Oka Y, Tkachi N, Shuker S, Yerumiyahu U (2007) Enhanced nematicidal activity of organic and inorganic ammonia-releasing amendments by Azadirachta indica extracts. J Nematol 39:9–16
Renco M, Sasanelli N, Kovacik P (2011) The effect of soil compost treatments on potato cyst nematodes Globodera rostochiensis and Globodera pallida. Helminthologia 48:184–194. https://doi.org/10.2478/s11687-011-0027-1
Schneider-Orelli O (1947) Entomologisches Praktikum; (Entomology practical course); HR Sauerländer. Aarau, Switzerland
Schröder T, McNamara DG, Gaar V (2009) Guidance on sampling to detect pine wood nematode Bursaphelenchus xylophilus in trees, wood, and insects. Bull OEPP/EPPO Bull 39:179–188. https://doi.org/10.1111/j.1365-2338.2009.02287.x
Schortemeyer M, Thomas K, Haack RA, Uzunovic A, Hoover K, Simpson JA, Grgurinovic CA (2011) Appropriateness of Probit-9 in the development of quarantine treatments for timber and timber commodities. J Econ Entomol 104:717–731. https://doi.org/10.1603/EC10453
Shoji T (1985) Eradication of the pine wood nematode, Bursaphelenchus xylophilus, and the pine sawyer, Monochamus alternatus, in pine logs by the winter application of metam-ammonium (NCS). JJN 15:61–63. https://doi.org/10.14855/jjn1972.15.61
Steiner G, Bührer EM (1934) Aphelenchoides xylophilus n. sp., a nematode associated with blue stain fungi in timber. J Agric Res 48:949–951
Su L, Ruan Y, Yang X, Wang K, Li R, Shen Q (2015) Suppression on plant-parasitic nematodes using a soil fumigation strategy based on ammonium bicarbonate and its effects on the nematode community. Sci Rep 5:17597. https://doi.org/10.1038/srep17597
Tan QQ, Wu HY, Jiang SX, Ma HB (2013) Mortality and movement behaviour of Bursaphelenchus xylophilus under different dosages of copper sulphate. Plant Prot Sci 49:98–103. https://doi.org/10.17221/39/2012-PPS
Yeon J, Park AER, Kim YJ, Seo HJ, Yu NH, Ha S, Park HW, Kim JC (2019) Control of root-knot nematodes by a mixture of maleic acid and copper sulphate. Appl Soil Ecol 141:61–68. https://doi.org/10.1016/j.apsoil.2019.05.010
Wei C, Zheng H, Li Q, Lu X, Yu Q, Zhang H, Chen Q, He N, Kardol P, Liang W, Han X (2012) Nitrogen addition regulates soil nematode community composition through ammonium suppression. PLoS ONE 7(8):e43384. https://doi.org/10.1371/journal.pone.0043384
Whitehead AG, Hemmimg JR (1965) A comparison of some quantitative methods of extracting small vermiform nematodes from soil. Ann Appl Biol 55:25–38. https://doi.org/10.1111/j.1744-7348.1965.tb07864.x
Acknowledgements
The authors would like to thank José Morgado from Toscca - Equipamentos em Madeira, Lda.; Daniela Silva from MTL, Madeiras Tratadas, Lda. and Ricardo Pinto from Madeiras Afonso, Lda. for providing Pinus pinaster trunks, preservative products for the in vitro assays and for giving technical support in the industrial assays. Furthermore, we would like to thank Lenhotec and Vitor Poças, Paulo Verdasca, Alcinda Amaro and Sílvia Leitão from AIMMP for logistic support. and José Pape from Carmo Wood, Nelson Pedrosa from Pedrosa & Irmãos, Lda. and Marcolino Farinha from Pinhal Nova, Madeiras Tratadas, Lda. for providing P. pinaster trunks.
Funding
Open access funding provided by FCT|FCCN (b-on). This research was supported by Associação das Indústrias de Madeira e Mobiliário de Portugal (AIMMP) through national funds and the co-funding by COMPETE 2020 (Programa Operacional Competitividade e Internacionalização, Portugal 2020, Projeto Conjunto SI Qualificação Nº 41359), under the project INOV WOOD & FURNITURE, WOODLAB action. Other funds were provided by Instituto do Ambiente, Tecnologia e Vida (IATV) and by the Portuguese Foundation for Science and Technology (FCT) through national funds and the co-funding by FEDER, PT2020 and COMPETE 2020 under the projects UIDB/04004/2020 and ReNATURE (Centro 2020, Centro-01-0145-FEDER-000007).
Author information
Authors and Affiliations
Contributions
LF and IA contributed to the study conception and design. Material preparation, data collection and analysis were performed by LF, HS and IA. The first draft of the manuscript was written by LF and all authors commented on previous versions of the manuscript. All authors read and approved the final manuscript.
Corresponding author
Ethics declarations
Conflict of Interest
All authors declared that they have no conflict of interest.
Ethics approval
This article does not contain any studies with human participants or vertebrates performed by any of the authors.
Consent to participate
Informed consent was obtained from all individual participants included in the study.
Consent for publication
Informed consent was obtained from all individual participants included in the study.
Additional information
Publisher’s Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Fonseca, L., Silva, H. & Abrantes, I. Industrial assays to evaluate the efficacy of vacuum pressure impregnation with commercial wood preservatives to eliminate the pinewood nematode, Bursaphelenchus xylophilus, and other nematodes from Pinus pinaster wood. Eur. J. Wood Prod. 81, 1147–1159 (2023). https://doi.org/10.1007/s00107-023-01943-6
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00107-023-01943-6