Abstract
Sandwich panels with expanded cork agglomerates as core and Aleppo pine wood veneer as face sheets were developed and characterized for compression (in plane and out of plane), traction and bending (three and four point). The load–displacement curves and fracture patterns were analyzed. The expanded cork agglomerate core allowed very good performance under compression while the wood layers strengthened the panel in relation to tensile stresses. Increasing the number of layers had a positive impact on the mechanical performance of the sandwich structure. Such eco-friendly, light and low cost sandwich panels can be used as non-structural construction elements such as partition walls.
Similar content being viewed by others
References
Alcantara F, Teixeira D, Paulino M (2013) Cork composites for the absorption of impact energy. Compos Struct 95:16–27
Amen-Chen C, Pakdel H, Roy C (2001) Production of monomeric phenols by thermochemical conversion of biomass: a review. Bioresour Technol 79:277–299
Anjos O, Pereira H, Rosa ME (2008) Effect of quality; porosity and density on the compression properties of cork. Holz Roh Werkst 66(4):295–301
Anjos O, RodriguesC Morais J, Pereira H (2014) Effect of density on the compression behaviour of cork. Mater Design 53:1089–1096
Baptista APM, Vaz MDC (1993) Comparative wear testing of flooring materials. Wear 162:990–995
Castro O, Silva JM, Devezas T, Silva A, Gil L (2010) Cork agglomerates as an ideal core material in lightweight structures. Mater Design 31:425–432
Diaz A, Diaz MA, Macias A, Rosa P, Serrano V (2003) Bending strength of black and composite agglomerates of cork. Mater Lett 57:4004–4008
Fernandes R, Moura MFSF, Silva FGA, Dourado N (2014) Mode I fracture characterization of a hybrid cork and carbon–epoxy laminate. Compos Struct 112:248–253
Ferreira E, Pereira H (1986) Some anatomical and chemical changes in manufacturing cork black agglomerates. Cortiça 576:274–279
Fortes MA, Rosa ME, Pereira H (2004) A cortiça, IST Press, Lisboa
Gibson LJ, Ashby MF (1997) Cellular solids: structure and properties, 2nd edn. University Press, Cambridge
Gibson LJ, Easterling KE, Ashby MF (1981) The structure and mechanics of cork. In: Proceedings of the Royal Society London series A-Math Phys Eng Sci 377:99-117
Gil L (2007) Cork as a building material. Technical manual, APCOR, Portugal
Gil L (2009) Cork composites: a review. Materials 2(3):776–789
Moreira RAS, Melo FJQ, Dias Rodrigues JF (2010) Static and dynamic characterization of composition cork for sandwich beam cores. J Mater Sci 45(12):3350–3366
NFT 54-602 (1983) Plastics based sandwich structures-perpendicular compression test, Afnor 83647
NFT 54-603 (1983) Plastics based sandwich structures-perpendicular tensile test, Afnor 83648
NFT 54-604 (1986) Plastics based sandwich structures–longitudinal compression test without or with buckling, Afnor 86618
NFT 54-606 (1987) Plastics based sandwich structures-bend test, Afnor 87461
Pereira H (1992) The thermochemical degradation of cork. Wood Sci Technol 26:259–269
Pereira H (2007) Cork: biology, production and uses. Elsevier, Amsterdam
Pereira H, Baptista C (1993) Influence of raw material quality and process parameters in the production of insulation cork agglomerates. Holz Roh Werkst 51(5):301–308
Pereira H, Ferreira E (1989) Scanning electron microscopy observation of insulation cork agglomerates. Mater Sci Eng A111:217–225
Pinto A, Melo B (1988) Insulation: black agglomerated cork and other insulating materials. Cortiça 602:322–328
Reis L, Silva A (2009) Mechanical behaviour of sandwich structures using natural cork agglomerates as core materials. J Sandw Struct Mater 11:487–500
Rosa ME, Fortes MA (1988a) Temperature induced alterations of the structure and mechanical properties of cork. Mater Sci Eng 100:69–78
Rosa ME, Fortes MA (1988b) Rate effects on the compression and recovery of dimensions of cork. J Mater Sci 23(3):879–885
Rosa ME, Pereira H (1994) The effect of long term treatment at 100°C–150°C on structure, chemical composition and compression behavior of cork. Holzforschung 48:226–232
Sen A, Velez Marques A, Gominho J, Pereira H (2012) Study of thermochemical treatments of cork in the 150 400 & #xB0;C range using colour analysis and FTIR spectroscopy. Ind Crop Prod 38:132–138
Sen A, Van den Bulcke J, Defoirdt N, Jo Van Acker, Pereira H (2014) Thermal behaviour of cork and cork components. Thermochim Acta 582:94–100
Shivakumar Kl, Chen H (2009) Structural performance of eco-core sandwich panels. In: Daniel IM, Gdoutos EE, Rajapakse YDS (eds) Major Accomplishments in Composite Materials and Sandwich Structures, Springer Netherlands, pp 381–405
Silva SP, Sabino MA, Fernandes EM, Correlo VM, Boesel LF, Reis RL (2005) Cork: properties, capabilities and applications. Int Mater Rev 50(6):345–365
Simoes N, Moreira A, Branco FG (2007) Effect of natural and expanded granulated cork on strength and thermal behaviour of concrete. In: 35th IAHS World Congress on Housing-planning design construction performance. Melbourne, Australia, pp 4–7
Sousa-Martins J, Kakogiannis D, Coghe F, Reymen B, Teixeira-Dias F (2013) Behaviour of sandwich structures with cork compound cores subjected to blast wave. Eng Struct 46:140–146
Vaz MF, Fortes MA (1998) Friction properties of cork. J Mater Sci 33:2087–2093
Vinson JR (1999) The behaviour of sandwich structures of isotropic and composite materials. Technomic Publishing Co, Lancaster
Zenkert D (1997) The handbook of sandwich construction. EMAS Publishing, London
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Lakreb, N., Bezzazi, B. & Pereira, H. Mechanical strength properties of innovative sandwich panels with expanded cork agglomerates. Eur. J. Wood Prod. 73, 465–473 (2015). https://doi.org/10.1007/s00107-015-0908-y
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00107-015-0908-y