Abstract
The densification behavior of 2.5 vol.-% SiC/ZTA composites was evaluated. The results showed that the prepared composites are well densified at 1600°C. The phase composition, microstructure, and mechanical properties of the sintered composites were investigated. All the mechanical properties were enhanced by the addition of SiC.
Similar content being viewed by others
References
Rajendran, S., Swain, M.V., Rossell, H.J.: Mechanical properties and microstructure of co-precipitated derived tetragonal Y2O3-ZrO2-Al2O3 composites. J. Mater. Sci. 23 (1988) 1805–1812
Lin, G.Y., Lei, T.C.: Microstructure, mechanical properties and thermal shock behavior of Al2O3 + ZrO3 + SiCw composites. Ceram. Int. 24 (1998) 313–326
Fang, J., Thompson, A.M., Harmer, M.P., Chan, H.M.: Effect of yttrium and lanthanum on the final-stage sintering behavior of ultrahigh-purity alumina. J. Am. Ceram. Soc. 80 (1997) 2005–2012
Laren, I.M., Cannon, R.M., Gügün, M.A., Voytovych, R., Popescu, N.P., Scheu, C., Tüffnen, U., Rühle, M.: Abnormal grain growth in alumina: Synergistic effects of yttria and silica. J. Am. Ceram. Soc. 86 (2003) 650–659
Yazdi, A.R., Baharvandi, H.R., Abdizadeh, H., Ehsani, N.: Study of mechanical properties and fracture mode of alumina-silicon carbide nanocomposites. Inter. J. Modern Phy., Conference Series 5 (2012) 551–558
Shi, X.L., Xu, F.M., Zhang, Z.J., Dong, Y.L., Tan, Y., Wang, L., Yang, J.M.: Mechanical properties of hot-pressed Al2O3/SiC composites. Mater. Sci. Eng. A. 527 (2010) 4646–4649
Choa, Y.H., Nakahira, A., Nihara, K.: Microstructure and mechanical properties of SiC-platelet Al2O3/SiC-particle hybrid composites. J. Mater. Sci. 35 (2000) 3143–3149
Sciti, D., Vicens, J., Bellosi, A.: Microstructure and mechanical properties of alumina-SiC nanocomposite prepared from ultrafine powders. J. Mater. Sci. 37 (2002) 3747–3758
Bamba, N., Choa, Y.H., Sekino, T.: Microstructure and mechanical properties of yttria stabilized zirconia/silicon carbide nanocomposites. J. Eur. Ceram. Soc. 18 (1998) 693–699
Lucchini, E., Maschio, S.: Processing and mechanical properties of SiC-whiskers-reinforced Al2O3-ZrO2 composites. J. Mater. Sci. Lett. 9 (1999) 417–419
Wang, H.Z., Gao, L., Guo, J.K.: Fabrication and microstructure of Al2O3-ZrO2 (3Y)-SiC nanocomposites. J. Euro. Ceram. Soc. 19 (1999) 2125–2131
Ryabkov, Y.I., Sitnikov, P.A.: Conditions for preparation of oxide components and their effect on properties of Al2O3-ZrO2-SiC composite. Refr. Indust. Ceram. 44 (2003) 115–118
Liu, S.Y., Wang, Y., Zhou, C., Pan, Z.Y.: Mechanical properties and tribological behavior of alumina/zirconia composites modified with SiC and plasma treatment. Wear 332–333 (2015) 885–890
Zhang, X.P., Ouyang, J.H., Wang, Y.J., Liu, Z.G., Wang, Y.M.: Microstructure and high-temperature mechanical properties of ZrO2-Al2O3-SiC ceramics. J. Mater. Eng. Perform. 24 (2015) 3615–3621
Anstis, G.R., Chantikul, P., Lawn, B.R., Marshall, B.D.: A critical evaluation of indentation techniques for measuring fracture toughness: I, Direct crack measurement. J. Am. Ceram. Soc. 64 (1981) 533–538
Nishida, T., Hanaki, Y., Pezzotti, G.: Effect of notch-root radius on the fracture toughness of a fine-grained alumina. J. Am. Ceram. Soc. 77 (2006) 606–608
Borsa, C.E., Ferreira, H.S., Kiminami, R.: Liquid phase sintering of Al2O3/SiC nanocomposites. J. Eur. Ceram. Soc. 19 (1999) 615–621
Sun, J., Iwasa, M., Nakayama, T., Niihara, K., Gao, L., Jin, X.: Pressureless sintering of alumina carbon nanotubes composites in air atmosphere furnace and their mechanical properties. J. Ceram. Soc. Jpn. 112 (2004) 403–406
Dong, Y.L., Xu, F.N., Shi, X.L., Zhang, C., Zhang, Z.J., Yang, J.M., Tan, Y.: Fabrication and mechanical properties of nano-/micro-sized Al2O3/SiC composites. Mater. Sci. Eng. A. 504 (2009) 49–54
Levin, I., Kaplan, W.D., Brandon, D.G., Layyous, A.A.: Effect of SiC submicrometer particle size and content on fracture toughness of alumina-SiC nanocomposites. J. Am. Ceram. Soc. 78 (1995) 254–256
Ohji, T., Jeong, Y.K., Choa, Y.H., Niihara, K.: Strengthening and toughening mechanisms of ceramic nanocomposites. J. Am. Ceram. Soc. 81 (1998) 1453–60
Parchoviandky, M., Galusek, D., Sedlacek, J., Svancarek, P., Kasiarova, M., Dusza, J., Sajgalik, P.: Microstructure and mechanical properties of hot pressed Al2O3/SiC nanocomposites. J. Eur. Ceram. Soc. 33 (2013) 2291–2298
Soh, A.K., Fang, D.N., Dong, Z.X.: Analysis of toughening mechanism of ZrO2/nano SiC ceramic composites. J. Composite Mater. 38 (2004) 227–240
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Naga, S.M., Elgamhoudy, M., El-Maghraby, H.F. et al. ZTA Composite Containing 2.5 Vol.-% SiC: Densification and Characterization. Interceram. - Int. Ceram. Rev. 66, 36–40 (2017). https://doi.org/10.1007/BF03401200
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/BF03401200