Abstract
With the advanced development of computer-based enabling technologies, many engineering, medical, biology, chemistry, physics and food science etc have developed to the unprecedented levels, which lead to many research and development interests in various multi-discipline areas. Among them, biomimetics is one of the most promising and attractive branches of study. Biomimetics is a branch of study that uses biological systems as a model to develop synthetic systems. To learn from nature, one of the fundamental issues is to understand the natural systems such animals, insects, plants and human beings etc. The geometrical characterization and representation of natural systems is an important fundamental work for biomimetics research. 3D modeling plays a key role in the geometrical characterization and representation, especially in computer graphical visualization. This paper firstly presents the typical procedure of 3D modelling methods and then reviews the previous work of 3D geometrical modelling techniques and systems developed for industrial, medical and animation applications. Especially the paper discusses the problems associated with the existing techniques and systems when they are applied to 3D modelling of biological systems. Based upon the discussions, the paper proposes some areas of research interests in 3D modelling of biological systems and for Biomimetics.
Similar content being viewed by others
References
Vincent J F V. http://www.bath.ac.uk/mech-eng/biomimetics/about. htm
Vincent J F V. Stealing ideas from nature. In: Deployable Structures. Ed S Pellegrino, Springer, Vienna, 2001, pp51–58.
Tong J, Guo Z J, Ren L Q, Chen B C. Curvature features of three soil-burrowing animal claws and their potential applications in soil-engaging components. International Agricultural Engineering Journal, 2003, 12 (3 and 4): 119–130.
Ren L Q, Zhang L, Tong J, Shi Y W. GA-based analysis of the fractalness of soil-burrowing animal body surfaces. International Agricultural Engineering Journal, 2001, 10 (1 and 2): 13–27.
Kobayashi H, Kresling B, Vincent J F V. The geometry of unfolding tree leaves. Proc R Soc Land, 1998, B265: 147–154.
Tong J, Sun J Y, Chen D H, Zhang S J. Geometrical features and wettability of dung beetles and potential biomimetic engineering applications in tillage implements. Soil and Tillage Research, 2004(in press).
Li S W, Tong J, Zhang S J, Chen B C. Geometrical modelling of the exterior configuration of a cattle hoof by reverse engineering technique. Transactions of the Chinese Society of Agricultural Engineering, 2004(in press).
Haas F. Geometry and mechanics of hind-wing folding in Dermaptera and Coleoptera. M Phil thesis, University of Exeter, UK, 1994.
Herbig A, Kull U. Leaves and ramification. Proc 2nd Int Symp. SFB 230 Part 2, Stuttgart Germany, 1991, pp109–117.
Kresling B. Folded structures in natureö lesson in design. Proc 2nd Int Symp. SFB 230 Part 2, Stuttgart, Germany, 1991, pp155–161.
Kesel A B. The insect wing-a multifunctional mechanical system. Proc 3rd Int Symp. SFB 230, Stuttgart, Germany, 1994, pp181–184.
Wootton R J. Support and deformability in insect wings. J Zool Lond, 1981, 193: 447–468.
Okabe M. 3D modeling of trees from freehand sketch. BSc. Thesis, the University of Tokyo, Japan, 2003.
Deussen O, Lintermann B. Interactive modeling of plants. IEEE Computer Graphics and Applications, 1999, 19(1): 56–65.
Mech R, Prusinkiewicz P. Visual models of plants interacting with their environment. Proceedings of SIGGRAPH, 1996, 96: 397–410.
Ghanem T A, Rabbitt R D, Tresco P A. Three-dimensional reconstruction of the membranous vestibular labyrinth in the toadfish. Opsanus tau. Hearing Research, 1998, 124: 27–43.
Angelo J, Beraldin J A, Biais F, Boulanger P, Cournoyer L, Domey J, Elhakim S F, Godin G, Rioux M, Taylor J. Real world modelling through high resolution digital 3D imaging of objects and structures. ISPRS Journal of Photogrammetry and Remote Sensing, 2000, 55: 230–250.
Gledhill D, Tian G Y, Taylor D, Clarke D. Panoramic imaging-a review. Computers and Graphics, 2003, 27: 435–445.
Huang D, Yan H. NURBS curve controlled modelling for facial animation. Computers and Graphics, 2003, 27: 373–385.
Craig J G, Cramer K E, Cody D D, Hearshen D O, Ceulemans R Y, Van Holsbeeck M T, Eyler W R. Premature partial closure and other deformities of the growth plate: MR Imaging and Three-dimensional Modeling. Radiology, 1999, 210: 835–843.
Kim J S, Park T S, Park S B, Kim J S, Kim I Y, Kim S I. Measurement of femoral neck anteversion in 3D, Part 1: 3D imaging method. Medical and Biological Engineering and Computing, 2000, 38: 603–609.
Kim J S, Park T S, Park S B, Kim J S, Kim I Y, Kim S I. Measurement of femoral neck anteversion in 3D, Part 2: 3D modelling method. Medical and Biological Engineering and Computing, 2000, 38: 610–616.
Gruen A, Murai S J. High-resolution 3D modelling and visualization of mount everest. ISPRS Journal of Photogrammetry and Remote Sensing, 2002, 57: 102–113.
Swingen C M, Seethamraju R T, Jerosch-Herold M. Feed-back-assisted three-dimensional reconstruction of the left ventricle with MRI. Journal of Magnetic Resonance Imaging, 2003, 17: 528–537.
Pollefeys M, Koch R, Vergauwen M, Van Gool L. Automated reconstruction of 3D scenes from sequences of images. ISPRS Journal of Photogrammetry and Remote Sensing, 2000, 55: 251–267.
Sarti A, Gori R, Lamberti C. A physically based model to simulate maxillo-facial surgery from 3D CT images. Future Generation Computer Systems, 1999, 15: 217–221.
Han M, Kanade T. A perspective factorization method for Euclidean reconstruction with uncalibrated cameras. The Journal of Visualization and Computer Animation, 2002, 13: 211–223.
Streicher J, Müller G B. 3D modelling of gene expression patterns. TRENDS in Biotechnology, 2001, 19 (4): 145–148.
Behr J, Choi S M, Grokopf S, Hong H, Nam S A, Hilde-brand A, Kim M H, Sakas G. 3D modelling for diagnosis and treatment planning in cardiology. Radiologe, 2000, 40: 256–261.
Kehl H G, Jager J, Papazis N, Dimitrelos D, Gehrmann J, Kassenbohmer R, Vogt J, Sakas G. 3D heart modelling from biplane, rotational angiocardiographic X-ray sequences. Computers and Graphics, 2000, 24: 731–739.
Courrioux G, Nullans S, Guillen A, Boissonnat J D, Repusseau P, Renaud X, Thibaut M. 3D volumetric modeling of Cadomian terranes (Northern Brittany, France): an automatic method using Voronoi diagrams. Tectonophysics, 2001, 333: 181–196.
Tamas V, Ralph R M, Jordan C. Reverse engineering of geometric models-an introduction. Computer-Aided Design, 1997, 29(4): 225–268.
Zhang S J, Raja V, Lim W L, Fernandes K J, Garside J. Error analysis of data acquisition of reverse engineering process using design of experiment. Advanced Manufacturing Technology-XVI. Edited by Professor K Cheng and D Webb, Professional Engineering Publishing Limited, 2002, pp145–150.
Renishaw. http://www.renishaw.com/client/product/UKEnglish/PGP-890.shtml
Wicks and Wilson, http://www.wwl.co.uk/
3D Café. http://www.3dcafestore.com/3dmodelsl.html
3D Model Works, http://www.3dmodelworks.com/redir.asp
Anderson R C. Photogrammetry: the pros and cons for archaeology. World Archaeology, 1982, 14(2): 200.
Jeyapalan K. Photogrammetry in recording the historic ship Niantic. Photogrammetric Engineering and Remote Sensing, 1980, 46: 1531.
Introduction to Photogrammetry. http://www.univie.ac.at/Luftbildarchiv/wgv/intro.htm
Urquhart C W, Siebert J P. Towards real-time dynamic close range photogrammetry. Proc SPIE Videometrics II, 1993, 2067: 240–251.
Siebert J P, Marshall S J. Human body 3D imaging by speckle texture projection photogrammetry. Sensor Review, 2000, 20 (3): 218–226.
William J, Wing N. Geometric analysis, visualization, and conceptualisation of 3D image data. Report of Imaging and Distributed Computing Group, Information and Computing Sciences Division, Lawrence Berkeley Laboratory, Publication number: LBL-35329, http://www-itg.lbl.gov/ITG/Whole.Frog/3D.study.html
Zhang S J, Raja V, Ryall C, Wimpenny D. Rapid prototyping models and their quality evaluation using reverse engineering. Journal of Mechanical Engineering Science, 2003, 217(C): 81–96.
Jun Y T, Raja V H. Extracting geometric attributes directly from scanned point set for feature recognition. Int J of Computer Integrated Manufacturing, 2002, 15 (1): 50–61.
Jun Y T, Raja V H, Park S. Geometric feature recognition for reverse engineering using neural networks. Int J of Advanced Manufacturing Technology, 2001, 17: 462–470.
Park S, Jun Y T. Automated segmentation of scanned point data in feature-based reverse engineering system. 2001 International CIRP Design Seminar. Stockholm, Sweden, 2001, pp353–358.
Imageware Surfacer-http://www.eds.com/products/plm/imageware/index.shtml
Raindrop Geomagic Studio-http://www.geomagic.com/products
Mullins J. Secrets of a perfect skin: sharks do it, dolphins do it-now even aircraft engineers are managing to banish turbulence and drag Mullins. J Source: New Scientist, 1997, 2065: 28.
Mullins J. Secrets of a perfect skin: sharks do it, dolphins do it-now even aircraft engineers are managing to banish turbulence and drag Mullins. J Source: New Scientist, 1997, 2065: 28.
Ridgway S H, Carder D A. Features of dolphin skin with potential hydrodynamic importance. IEEE Engineering in Medicine and Biology, 1993, 12(3): 83–88.
Zhang S J, Howard D, Sanger D J, Miao S. Multi-legged walking machine body designs. Robotica, 1998, 16: 593–598.
Howard D, Zhang S J, Sanger D J. Multi-legged walker design-the joint torque versus workspace compromise. Journal of Mechanical Engineering Science, 1998, 212 (C): 477–488.
Chung A. Bionics information exchange portal system. MSc Thesis, University of Warwick, UK, 2002.
Lean from nature web-portal-http://www.learnfromnature.com
Mitutoyo’s Series 318 Litematic. http://www.mitutoyo.co.uk
Reid G T, Rixon R C, Stewart H. Stripe scanning for engineering. Sensor Review, 1998, 8(2): 67–71.
Reid G T, Marshall S J, Rixon R C, Stewart H. A laser scanning camera for range data acquisition. J Phys D: Appl Phys, 1988, 21: S1–S3.
Reid G T, Rixon R C, Stewart H. Moiré topography with large contour intervals. Proc SPIE, 1988, 814: 307–313.
Isdale J. 3D scanner technology review, http://vr.isdale.com/3DScanners
http://biocomp.Stanford.edu/3dreconstruction
http://www.cs.ubc.ca/spider/ladic/overview.html
Stevens J K, Mills L R, Trogadis J E. Three-dimensional Confocal Microscopy: Volume Investigation of Biological Systems. Academic Press, London, 1994.
MicroScribe-http://www.immersion.com/digitizer/products
Mulcahy C. The basic curves and surfaces of computer aided geometric design, http://www.matapp.unimib.it/naldi/cagd.pdf
Gerald Farin. Curves and Surfaces for CAGD (a Practical Guide). 3rd Edition. Academic Press, London, 1993.
Josef Hoschek, Dieter Lasser. Fundamentals of Computer Aided Geometric Design. A. K. Peters, Ltd, USA, 1993.
Huang D, Yan H. NURBS curve controlled modelling for facial animation. Computers and Graphics, 2003, 27: 373–385.
Piegl L, Tiller W. The NURBS Book (2nd ed). Springer, Berlin, 1997.
Gudo M, Gutmann M, Scholz J. Concepts of functional, engineering and constructional morphology: introductory remarks. Senckenbergiana lethaea, 2002, 82 (1): 7–10.
Schmidt-Kittler N, Vogel K P. Constructional Morphology and Evolution. Berlin, Heidelberg, New York, Tokyo, Springer, 1991.
Vincent J F V, Mann D L. Systematic technology transfer from biology to engineering. Phil Trans R Soc A, 2002, 360: 159–174.
The BIONIS Network - http://www.extra.rdg.ac.uk/eng/BIONIS
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Zhang, S., Hapeshi, K. & Bhattacharya, A.K. 3D Modelling of Biological Systems for Biomimetics. J Bionic Eng 1, 20–40 (2004). https://doi.org/10.1007/BF03399451
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/BF03399451