Abstract
Austenite may be formed during tempering below A1 as determined in continuous heating. The amount formed and the decomposition characteristics depend on time and temperature of tempering. Transformation of this austenite during cooling or by plastic deformation in tensile or impact testing results in increased tensile strength, decreased ductility, and reduced notch toughness.
Similar content being viewed by others
References
E. C. Bain: (Howe Memorial Lecture) Trans. AIME (1932) 100, 13.
H. H. Bleakney and A. W. Grosvenor: Trans. C.I.M.M. (1941) 44, 101.
A. Dube and R. L. Cunningham: Trans. C.I.M.M. (1946) 49, 1.
G. R. Brophy and A. J. Miller: Trans. A.S.M. (1949) 41, 1185.
I. R. Kramer, S. L. Toleman, and W. T. Haswell: Preprint A.S.M. (Oct. 1949).
S. G. Fletcher and M. Cohen: Trans. A.S.M. (1945) 34, 216.
B. L. Averbach and M. Cohen: Trans. AIME (1948) 176, 401; Met. Tech. (Feb. 1948) TP 2342.
L. S. Birks and H. Friedman: Rev. Sci. Instruments. (Aug. 1947) 18, 576.
C. Wells: A.S.M. Metals Handbook. p. 1251 (1948).
A. R. Troiano and A. B. Greninger: A.S.M. Metals Handbook. p. 263 (1948).
M. Cohen: (Campbell Memorial Lecture) Trans. A.S.M. (1949).
A. W. McReynolds: Jnl. Appl. Phys. (Oct. 1949) 20, 896.
Author information
Authors and Affiliations
Additional information
AIME Chicago Meeting, October 1950.
TP 2897 E. Discussion (2 copies) may be sent to Transactions AIME before Dec. 15, 1950.
Paper released by permission of Navy Department.
Rights and permissions
About this article
Cite this article
Bailey, E.F., Harris, W.J. Austenite formation during tempering and its effects on mechanical properties. JOM 2, 997–1000 (1950). https://doi.org/10.1007/BF03399096
Received:
Revised:
Published:
Issue Date:
DOI: https://doi.org/10.1007/BF03399096