Abstract
An analysis of the processes important in high-temperature, oxidation-resistant coatings for tungsten and its alloys are presented. Existing coatings now in use are evaluated, and additional coatings are proposed for future development. A thorough list of references is included.
Similar content being viewed by others
References
Report of the Subpanel on Coating (draft); Refractory Metals Sheet Rolling Panel of the Materials Advisory Board, February 1962.
O. Kubaschewski and B. E. Hopkins: J. of Less Common Metals, 1960, p. 172.
M. Nicholas and C. D. Dickinson: High-Temperature Protective Coatings for Refractory Metals, Part II; Sixth Meeting of the Refractory Composites Work Group, Dayton, Ohio, 1962.
Air Force Contract: AF 33 (616)-8175.
J. Loners: Compt. Rendus, 1952, p. 91.
L. Leibowitz, J. G. Schnizlein, J. D. Bingle, and R. C. Vogel: J. Electrochem. Soc., 1961, p. 1155.
D. Cubicciotti: J. Amer. Chem. Soc., 1962, p. 1079.
P. Levesque and D. Cubicciotti: J. Amer. Chem. Soc., 1951, p. 2028.
H. P. Probst: Ph. D. Thesis, Case Inst, of Technology, 1959.
L. F. Kendall, R. B. Wheeler, and S. H. Bush: Nucl. Sci. Eng., 1958, p. 171.
E. T. Hayes and A. H. Robeson: Trans. Electrochem. Soc., 1949, p. 142.
C. A. Phalnikar and W. M. Baldwin: Proc. ASTM, 1951, p. 1038.
J. Belle and M. W. Mallet: J. Electrochem. Soc., 1954, p. 339.
D. Cubicciotti: J. Amer. Chem. Soc., 1950, p. 4138.
E. A. Gulbransen and K. F. Andrew: Trans. AIME, 1957, p. 394.
J. D. Gadd and E. B. Evans: Corrosion, 1961, p. 109.
M. T. Sinnad and W. W. Smeltzer: Acta Met., 1957, p. 328.
A. F. Gerds and M. W. Mallett: J. Electrochem. Soc., 1954, p. 171.
H. A. Porte, R. C. Vogel, D. A. Fischer, and L. G. Schnizlein: J. Electrochem. Soc., 1960, p. 506.
E. A. Gulbransen and K. F. Andrews: J. Electrochem. Soc., 1951, p. 383.
C. Wagner: J. Electrochem. Soc, 1952, p. 369.
J. S. Kirkaldy: Can. J. Phys., 1958, p. 907.
A. G. Guy and C. B. Smith: Trans. Quarterly ASM, 1962, p. 7.
J. B. Clark and F. N. Rhines: Trans. ASM, 1959, p. 199.
I. Langmuir: Phys. Rev., 1913, p. 329.
P. E. Blackburn, K. F. Andrew, E. A. Gulbransen, and F. A. Brassart: WADC TR 59-575, Part II.
E. A. Gulbransen and K. F. Andrews: J. Electrochem. Soc., 1957, p. 334.
R. Perkins: Evaluation of Silicide Coating; Electrochem. Soc. Conf., May 1962.
E. M. Passmore, J. E. Boyd, L. P. Neal, C. A. Anderson, and B. S. Lement: WADD TR 60-343, and Progress Report No. 6: April 1961, AF 33 (616)-6354.
O. Kubaschewski: Trans. Brit. Ceramic Soc., 1961, p. 67.
J. L. Margrave: Symposium on High Temperature—A Tool for the Future; Stanford Research Inst., 1956.
Calculated from the data of C. B. Alcock and G. W. Hooper: Proc. Royal Soc., 1960, p. 551.
F. J. Norton: J. Appl. Phys., 1958, p. 1122.
J. C. Withers: Protective Coatings for Refractory Metals; Fifth Meeting of the Refractory Composites Work Group, Dallas, Texas, 1961.
J. D. McKenzie: J. Amer. Ceramic Soc, Dec. 1961.
F. J. Norton: Nature, to be published.
H. L. Shick: Chem. Rev., 1960, p. 331.
H. F. Ramsted and F. D. Richardson: Trans. AIME, 1961, p. 1021
D. D. Lawthers and L. Sama: ASD TR 61-233.
G. E. Oxx and L. F. Coffin: Trans. AIME, 1960, p. 541.
Author information
Authors and Affiliations
Additional information
The work described was performed by the authors at General Telephone & Electronics Labs. Inc.
Rights and permissions
About this article
Cite this article
Dickinson, C.D., Nicholas, M.G., Pranatis, A.L. et al. Protective Coatings For Tungsten. JOM 15, 787–792 (1963). https://doi.org/10.1007/BF03397253
Published:
Issue Date:
DOI: https://doi.org/10.1007/BF03397253