Abstract
The fatigue strengths of welded joints in welded structures are much lower than those of the base metal because there are stress concentrations and tensile residual stresses at weld toes. Ultrasonic peening treatment and the use of low transformation temperature electrodes are possible methods for improving the fatigue strengths of welded joints. It was thought that the latter might be particularly suitable for longitudinal welds containing high tensile residual stresses. Comparative fatigue tests carried out on treated transverse butt welded joints and on plate specimens with longitudinal fillet welded gussets confirmed this.
Similar content being viewed by others
References
Haagensen P.J.: IIW’s Round Robin and Design Recommendation for improvement Methods. IIW 50th Annual Assembly Conference, 1997.
Janosch J., Koneczny H., Debiez S. (France), Statnikov E.C. (Russia), Troufiakov V.J. and Mikhee P.P. (Ukraine): Improvement of fatigue strength in welded joints (in HSS and in aluminium alloys) by ultrasonic hammer peening. Welding in the World, vol. 37, No. 2, 1996, p. 72.
Statnikov E.S., Muktepavel V.O., Trufyakov V.I., Mikheev P.P., Kuzmenko A.Z. and Blomquist A.: Comparison of ultrasonic impact treatment (UIT) and other fatigue life improvement methods, IIW doc. XIII-1817–00, 2000.
Huo L., Wang D., Zhang Y. and Chen J.: Investigation on improving fatigue properties of welded joints by ultrasonic peening method. IIW doc. XIII-1812–00, 2000.
Ohta A. et al. Fatigue strength improvement of box section beam by low transformation temperature welding wire, Welding in the World, vol. 44, No. 5, 2000.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Lixing, H., Dongpo, W., Wenxian, W. et al. Ultrasonic Peening and Low Transformation Temperature Electrodes used for Improving the Fatigue Strength of Welded Joints. Weld World 48, 34–39 (2004). https://doi.org/10.1007/BF03266425
Published:
Issue Date:
DOI: https://doi.org/10.1007/BF03266425