Abstract
Materials design and development for resistance to stress corrosion cracking depends upon an understanding of the crack-growth mechanism. The factors controlling stress corrosion cracking may be classified as environmental, material and mechanical. This overview examines the state of the art in stress corrosion cracking and reviews such considerations as phenomenological influences, material chemistry and microstructure, mechanical factors. Also explored are materials design and future considerations.
Similar content being viewed by others
References
R.N. Parkins, Br. Corrosion J., Vol. 14 (1979), p. 5.
C. Edeleneau and A.J. Forty, Phil. Mag., Vol. 46 (1960), p. 521.
J.A. Beavers and E.N. Pugh, Metall. Trans. A., Vol. 11 (1980), p. 809.
M.T. Hahn and E.N. Pugh, Corrosion, Vol. 36 (1980), p. 380.
E.N. Pugh, Atomistics of Fracture, R.M. Latanision and J.R. Pickens, Eds., Plenum Press, New York, 1983, p. 997.
R.C. Newman and K. Sieradzki, Chemistry and Physics of Fracture, R.M. Latanision and R.H. Jones, Eds., Martinus Nijhoff Publishers, Dordrecht, 1986, p. 597.
S.M. Bruemmer, L.A. Chariot and D.G. Atteridge, “Evaluation of Welded and Repair-Welded Stainless Steel for Light Water Reactor (LWR) Service,” NUREG/CR = 3918, December 1984.
L. Long and H. Uhlig, J. Electrochem. Soc., Vol. 112 (1964), p. 1965.
J. Kuppa, H. Erhart and H. Grabke, Corr. Sci., Vol. 21 (1981), p. 227.
N. Bandyopadhyay, R.C. Newman and K. Sieradzki, Proc. 9th International Congress on Metallic Corrosion, Toronto, Canada, 1984.
A. Joshi and D.J. Stein, Corrosion, Vol. 28 (1972), p. 321.
R.H. Jones, Proc. 2nd International Symposium on Environmental Degradation of Materials in Nuclear Power Systems-Water Reactors, American Nuclear Society, 1985, p. 173.
R.W. Staehle, Corrosion, Vol. 26 (1970), p. 451.
P.R. Swann, Corrosion, Vol. 19 (1963), p. 3.
R.H. Jones, M.J. Danielson and D.R. Baer, Proc. 20th National Fracture Mechanics Symposium, Lehigh University, June 232_25, ASTM, 1987.
F.P. Ford, “Mechanisms of Environmental Cracking in Systems Peculiar to the Power Generation Industry,” EPRI NP-2589, Electric Power Research Institute, Palo Alto, California, 1982.
J.M. Silcock and P.R. Swann, Environment-Sensitive Fracture of Engineering Materials, Z.A. Foroulis, Ed., TMS-AIME, Warrendale, PA, 1979, p. 133.
S.P. Lynch, J. Mater. Sci., Vol. 20 (1985), p. 3329.
J.R. Crum and R.C. Scarberry, J. Mater. Energy Systems, Vol. 4 (1982), p. 125.
A.I. Asphahani and H.M. Tawainey, Corrosion and Corrosion Protection, R.P. Frankenthal and F. Mansfield, Eds., The Electrochemical Society, Inc., Pennington, NJ, 1981, p. 154.
A. Turnbull and J.G.N. Thomas, J. Electrochem. Soc., Vol. 129 (1982), pp. 1412–1422.
R.P. Gangloff and A. Turnbull, Modeling Environmental Effects on Crack Growth Processes, R.H. Jones and W.W. Gerberich, Eds., TMS, Warrendale, PA, 1986, p. 55.
M.J. Danielson, C. Oster and R.H. Jones, J. Electrochemical Society, 1987, in press.
F.P. Ford and P.L. Andresen, Proc. 3rd International Symposium on Environmental Degradation of Materials in Nuclear Power Systems—Water Reactors, 1987, TMS, Warrendale, PA, in press.
R.N. Parkins, Proc. Mechanics and Physics of Crack Growth: Application to Life Prediction, Mater. Science Engineering, in press.
J.T. Evans, Acta Metall., Vol. 34 (1986), p. 2075.
Additional information
Russell H. Jones received his Ph.D. in metallurgy from the University of California, Berkeley, in 1971. He is currently technical leader of the Metals Research Group of the Materials Sciences Department of Battelle-Northwest in Richland, Washington. Dr. Jones is also a member of TMS
Rights and permissions
About this article
Cite this article
Jones, R.H. Crack Growth Resistance. JOM 39, 32–39 (1987). https://doi.org/10.1007/BF03257569
Published:
Issue Date:
DOI: https://doi.org/10.1007/BF03257569