Abstract
The cracking of a metal alloy will sometimes result from the combined action of a corrodent and tensile stress, and this phenomenon is called stress corrosion cracking (SCC). Stresses that cause cracking can be residual or may be applied during service. A degree of mechanistic understanding of SCC will enable most metallic engineering materials to operate safely, though stress corrosion cracking failures still continue to occur unexpectedly in industry. In this paper, the characteristics, mechanisms and methods of SCC prevention are reviewed. The results of experimental studies on alpha brass are also reported of which the failure mode conformed with the film rupture and anodic dissolution mechanism.
Similar content being viewed by others
References
Dix HH Jr (1940) Acceleration of the role of corrosion by high constant stresses. Trans AIME 137:11
Champion FA (1965) Corrosion testing procedures, 2ND edn. Wiley, New York, p 133
Sheinker AA, Wood JD (1972) Stress corrosion cracking of a high strength steel, Stress corrosion cracking of metals—a state of the art, ASTM STP 518 ASTM, p 16
Thompson DH (1972) Stress corrosion cracking of copper metals’, Stress corrosion cracking of metals—a state of the art, ASTM, STP 518. American Society for Testing and Materials, p 39
Harwood JJ (1956) The phenomena and mechanism of stress corrosion cracking”, Stress corrosion cracking and hydrogen embrittlement. In: Robertson WD (ed) John Wiley, p 1–6
Fontana MG, Greene ND. Corrosion engineering, 2nd edn. McGraw Hill Int. Ed., p 91
Romanov VV (1961) Stress-Corrosion cracking of metals. Jerusalem: Israel Program for Scientific Translations.
Scully JC (1966) The characteristics of transgranular stress-corrosion cracking. Br Corros J 1(9):355–359
Parkins RN (1981) Environment sensitive fracture of metals, Metallic corrosion, Proc. 8th Int. Cong. On Metallic corr. (8th ICMC), Vol. III, p 2180–2200
Nguyen TH, Brown BF, Foley RT (1982) On the nature of the occluded cell in the stress corrosion cracking of AA 7075-T651—effect of potential, composition, morphology. Corrosion 38(6):319
Le AH, Foley RT (1983) Stress corrosion cracking of AA 7075-T651 in various electrolytes—statistical treatment of data obtained using DCB precracked specimens. Corrosion 39(10):379–383. doi:10.5006/1.3593875
Lyle FF (1983) Stress corrosion cracking characterization of 3.5 NiCrMoV low pressure turbine rotor steels in NaOH and NaCl solutions. Corrosion 39(4):120–131. doi:10.5006/1.3580827
Bavarian B, Szklarska-Smialowska Z, MacDonald DD (1982) Effect of temperature on the stress corrosion cracking of tempered type 403 martensitic stainless steel in sodium sulfate solution. Corrosion 38(12):604–608. doi:10.5006/1.3578210
Scully JC (1975) The fundamental of corrosion, 2nd edn. Pergamon Press, p 185
Felloni L, Cammarata GP, Palamobarini G, Poli G (1978) Influence of some metallurgical factors on the corrosion behaviour of two C–Mn steels in acidic solutions. Br Corros J 13(4):167
Bobylev AV (1961) Stress corrosion cracking of metals—Israel Program for Scientific Translation, Jerusalem, p 72
Timonova MA (1961) Stress corrosion cracking of metals—Israel Program for Scientific Translation, Jerusalem, p 73
Pugh EN, Montague WG, Westwood ARC (1966) Corros Sci 6:345
Liu R, Narita N, Attatetter C, Birnhaun H, Pugh EN (1980) Metall Trans 11A:1963
Edeleanu C (1959) In: Rhodin JN (ed) Physical metallurgy of stress corrosion fracture. Interscience Publishers, NY
Hines JG, Hoar TP (1956) J Iron Steel Inst 184(2):166
Hoar TP Hines JG (1961) Stress-Corrosion cracking of metals. Jerusalem: Israel Program for Scientific Translation p 107
Scully JC (1975) The fundamental of corrosion, 2nd edn. Pergamon Press, p 191
Kruger J 1980 in Stress corrosion cracking (eds) J Yahalom and A Aladjem (Israel: Freund Publishing House) p 9–16
Logan HL (1971) NACE Basic Corrosion Course. NACE publication, p 10–13
Uhlig H (1969) in Proc. Conf. fundamental aspects of stress corrosion cracking, NACE, Houston : Staehle RW, Forty AJ, Van Ruoyan D (eds)
Uhlig H (1973) Proc. Int. Conf. on SCC and Hydrogen Embrittlement of Iron Based Alloys. St. Etienne, NACE, Houston
Parkins RN (1971) In: Scully JC (ed) The theory of stress corrosion cracking in alloys. NATO, Brussels, p 167
Staehle RW (1971) In: Scully JC (ed) The theory of stress corrosion cracking in alloys. NATO, Brussels, p 223
Keating FH (1948) Symposium on internal stresses in metals and alloys. Institute for Metals, London, p 311
Mears, R.B., Brown, R.H., Dix Jr., E.H. (1944). “A generalized theory of stress corrosion cracking”, Proc. Symposium on stress-corrosion cracking of metals, ASTM, Inst. mining engineers, 329–323.
Logan HL (1952) Film-rupture mechanism of stress corrosion. J Reg Nat Bur Stds 48:99
Champion FA (1948) Int. Symp. on Stress in Metals and Alloys. Institute of Metals (London)
Ambrose JR, Kruger J (1974) Proc. 5th Int. Cong. On Metallic Corr, NACE, Houston
Scully JC (1967) Kinetic features of stress-corrosion cracking. Corros Sci 7(4):197–207
Parkins RB (1973) in Proc. Int. Conf. on SCC and Hydrogen embrittlement of iron based alloys. St. Etienne, NACE, Houston
Hoar TP, Hines JG (1956) The stress corrosion cracking of austenitic. Stainless Steels J Iron Steel Inst 184:166
Wearmouth WR, Dean GP, Parkins RN (1973) Role of stress in the stress corrosion cracking of a Mg-Al alloy. Corrosion 29:251
Vermilyea DA (1973) in Proc. Int. Conf. on SCC and hydrogen embrittlement of iron based Alloys. St. Etienne, NACE, Houston
Oriani RA (1972) A mechanistic theory of hydrogen embrittlement of steels. Ber Bunnsem Gesell F Phys Chemie 76:848
Troiano AR (1960) The role of hydrogen and other interstitials in the mechanical behaviour of metals. Trans ASM 52:54
Whiteman MB, Troiano AR (1965) Hydrogen embrittlement of austenitic stainless steel. Corrosion 21(2):53–56. doi:10.5006/0010-9312-21.2.53
Latanision RM, Staehle RW (1968) The effect of continuous hydrogenation on the deformation of nickel single crystals. Scripta Met 2:667–672
Davis RA, Dreyer GH, Gallangher WC (1964) Stress corrosion cracking study of several high strength steels. Corrosion 20(3):935
Johnson HH, Schneider EJ, Troiano AR (1958) Stress corrosion cracking and embrittlement. Trans AIME 212:526–536
Shively JH, Hehemann RF, Troiano AR (1966) Hydrogen permeability in a stable austenitic stainless steel. Corrosion 22(9):253–256. doi:10.5006/0010-9312-22.9.253
Birley SS, Troman D (1971) Stress corrosion cracking of 304L austenitic steel and the martensite transformation. Corrosion 27(2):63–71. doi:10.5006/0010-9312-27.2.63
Holzworth ML, Louthan MR Jr (1968) Hydrogen-induced phase transformations in type 304L stainless steels. Corrosion 24(4):110–124. doi:10.5006/0010-9312-24.4.110
Vaughn DA, Phalen DI, Peterson CL, Boyd WK (1963) Relationship between hydrogen pickup and susceptible paths in stress corrosion cracking of type 304 stainless steel. Corrosion 19(9):315t–326t. doi:10.5006/0010–9312-19.9.315
Berstein M, Pickering HW (1974) Carnegie-Melon University report 036-099-2
Wilde BE, Kim CD (1972) The role of hydrogen in the mechanism of stress corrosion cracking of austenitic stainless steels in hot chloride media. Corrosion 28(9):350–358. doi:10.5006/0010–9312-28.9.350
Preece CM (1973) in “Proc. Int. Conf. on SCC and Hydrogen embrittlement of iron based alloys”, St. Etienne, NACE, Houston
Radovici O, Popa MV (1981) The electrochemical study of stress corrosion cracking of some high strength carbon steels. Corrosion 37(8):443
Bradhurst DH, Heuer PM (1981) Environmental cracking of high strength maraging steels: part I—aqueous NaCl solution. Corrosion 37(1):50–55. doi:10.5006/1.3593837
Fontana MG, Greene ND (1987) Corrosion engineering, 2nd Edn. McGraw Hill Int. Ed., p 106
Loto CA (2012) Electrochemical noise measurement technique in corrosion research. Int J Electrochem Sci 7:9248–9270
Loto CA, Cottis RA (1987) Electrochemical noise generation during stress corrosion cracking of alpha-brass (70Cu-30Zn) alloy. Corrosion 43(8):499–504
Loto CA, Cottis RA (1989) Electrochemical noise generation during SCC of high strength aluminium alloy–7075–T6. Corrosion 45(2):136–141
Cottis RA, Loto CA (1989) Electrochemical noise generation during SCC of a high-strength carbon steel. Corrosion 46(1):12–19
Loto CA, Cottis (1988) Electrochemical noise generation during corrosion of stainless steel-type 316 in acid chloride environment. Bull Electrochem 4(12):1001–1005
Loto CA (1984) Electrochemical aspects of stress corrosion cracking, Ph.D. thesis, UMIST, Manchester
Loto CA. Electrochemical noise measurement and statistical parameters evaluation of stressed α-brass in Mattson’s solution. Alex Eng J. doi:10.1016/ j. aej.2016.12.012
Forty AJ (1966) Teknisk-Ventenskaplig Forksning, 32, p. 104, 1961, extracted from H.E. Johnson, J. Leja, Surface chemical factors in the stress-corrosion cracking of alpha brass. Corrosion 22(6): 183
Robertson WD, Tetelman AS (1963) Strengthening mechanisms in solids. ASM International, Metals Park, p 217
Forty AJ, Humble P (1963) The influence of surface tarnish on stress-corrosion of a-brass. Phil Mag 8:247–264
Newman RC, Shahrabi T, Sieradzki K (1989) Film-induced cleavage of alpha-brass. Scr Metall 23:71–74
Newman RC, Sieradzki K (1983) Correlation of acoustic and electrochemical noise in the stress corrosion cracking of alpha brass. Scr Metall 17:621–624
Du XS, Su WJ, Zang C, Li XJ, Qiao LJ, Chu WJ, Chen WC, Zhang QS, Liu DX (2013) Pre-strain enhances film rupture to promote SCC of brass in Mattsson’s solution—a proposal for a film rupture-induced SCC mechanism. Corros Sci 69:302–310
Du XS, Su YJ, Li JX, Qiao LJ, Chu WY (2012) Inhibitive effects and mechanism of phosphates on the stress corrosion cracking of brass in ammonia solutions. Corros Sci 60:69–75
Zhang C, Su YJ, Qiao LJ, Chu WY (2010) Study on the role of tarnishing film in stress corrosion cracking of brass in Mattsson’s solution. J Mater Res 25:991–998 2409–2415
Zhang C, Su YJ, Qiao LJ, Chu WY (2009) Tarnishing film-induced brittle cracking of brass. J Mater Res 24(7):2409–2415. doi:10.1557/jmr.2009.0289
Zhang C, Su YJ, Qiao L j, Chu W y (2009) Influence of hydrogen on the tarnishing film induced brittle cracking of brass. J Mater Res 24:3432–3438. doi:10.1557/jmr.2009.0406
Yu Y, Parkins RN, Xu Y, Thompson G, Wood GC (1987) Stress corrosion crack initiation in a brass exposed to sodium nitrite solutions. Corros Sci 27(2):141–151 153-157
Gad G, Yuan B, Wang C, Li L, Chen S (2014) The anodic dissolution process of copper in sodium fluoride solution. Int J Electrochem Sci 9:2565–2574
Galvele JR (1993) Surface mobility mechanism of stress corrosion cracking. Corros Sci 25(1–4):419–434
Hall MM (2009) Film-rupture model for aqueous stress corrosion cracking under constant and variable stress. Corros Sci 51(2):225–233
Allam NK, Nazeer AM, Ashour EA (2010) Effect of annealing on the stress corrosion cracking of α-brass in aqueous electrolytes containing aggressive ions. Ind Eng Chem Res 49(19):9529–9533. doi:10.1021/ie 101603w
Allam NK, Nazeer AM, Youssef GI, Ashour EA (2013) Electrochemical and stress corrosion cracking behavior of a-aluminium bronze and a-brass in nitrite solutions—a comparative study. Corrosion 69(1):7–84. doi:10.5006/06 60
Serebrinsky SA, Galvele JR (2004) Effect of the strain rate on stress corrosion crack velocities in face-centred cubic alloys: a mechanistic interpretation. Corros Sci 46(3):591–612. doi:10.1016/50010-938x(03)00172-0
Fernandez SA, Alvarez MG (2011) Passivity breakdown and stress corrosion cracking of a-brass in sodium nitrate solutions. Corros Sci 53(1):82–88
Lee CK, Shih HC (1995) Determination of the critical potentials for pitting protection and stress corrosion cracking of 67–33 brass in fluoride solutions. J Electrochem Soc 142(3):731–737. doi:10.1149/1.2048526
Turnbull A (1993) Modelling of environment assisted cracking. Corros Sci 34(6):921–960
Carranza RM, Galvele JR (1988) Repassivation kinetics in stress corrosion cracking—II, α-brass in non-ammoniacal solutions. Corros Sci 28(9):851–865
Bromoaniline—https://en.wikipedia.org/wiki/4-Bromoaniline. Retrieved: 20-06-2017
Pentylamine—http://www.chemspider.com/Chemical-Structure.7769.html. Retrieved: 20-06-2017
Donnelly B, Downier TC, Grzeskowiak R, Hamburg HR, Short D (1978) The effect of electronic delocalization in organic groups R in substituted thiocarbamoyl R–CS–NH2 and related compounds on inhibition efficiency. Corros Sci 18:109
Chetouani A, Hammouti B, Benhadda T, Daoudi M (2005) Inhibitive action of bipyrazolic type organic compounds towards corrosion of pure iron in acidic media. Appl Surf Sci 249:375
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Loto, C.A. Stress corrosion cracking: characteristics, mechanisms and experimental study. Int J Adv Manuf Technol 93, 3567–3582 (2017). https://doi.org/10.1007/s00170-017-0709-z
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00170-017-0709-z