Abstract
Up until now, piston and diaphragm-controlled two-stroke engines have been used almost exclusively for handheld engine-powered equipment, since these — when compared with four-stroke engines — have advantages mainly in regard to simple design, low weight, wide usable speed range and high power density. A disadvantage is the high hydrocarbon emissions, which due to the principle design are caused by the significant gas-exchange losses. In the future, the simple two-stroke engine will no longer be able to meet the increasingly stricter thresholds in Europe and the USA for pollutant emissions with hand-held engine-powered equipments. This is why Dolmar GmbH developed an innovative oil-ingasoline lubricated high-performance four-stroke engine for chainsaws, which combines the advantages of the two-stroke engine with the low emission of the four-stroke principle.
Similar content being viewed by others
References
EPA (2002): Control of Emission from nonroad spark-ignition engines (EPA Phase II regulation), Revised as of July 1, 2002
EC (1997): Directive 97/68/EC of the European Parliament and of the Council of 16 December 1997
EC (2002): Directive 2002/88/EC of the European Parliament and of the Council of 9 December 2002
Conley, J; Imagawa, Y.; Kurihara, K.; Rickard, G; Suchdey, S.; Bringhurst, R. (1996): The Optimization of a 26.2 cc, OHV, 4-Cycle Engine Aspiration System to Achieve 1999 CARB Emission Standards, SAE-Paper 961737
Dobler, H. (2004): Leichter Viertaktmotor mit Gemischschmierung, MTZ (65) 2004, Nr. 9 Motortechnische Zeitschrift (journal for engine technology), 9/2004, 65th volume
Auler, B. (2001): Development of a 4-stroke engine for chainsaw operation, 4. int. annual convention for the development of small engines 2001, 16.–17.03.2001, University of Applied Sciences, Offenburg
Dolmar (2004): Press release for GAFA 2004, Cologne
Peres, L. (1984): German patent DE 34 38 031 C1
Rights and permissions
About this article
Cite this article
Auler, B., Rodenbeck, J., Lügger, J. et al. Oil-in-gasoline lubricated one-cylinder four-stroke engine for chainsaws. MTZ Worldw 66, 12–14 (2005). https://doi.org/10.1007/BF03227762
Issue Date:
DOI: https://doi.org/10.1007/BF03227762