Abstract
The optimum networking of development tools for automotive powertrain projects using an integrated workflow requires new approaches for the development process. This article presents a concept for integrating different modelling and simulation tools using an automatic model transformation process developed by the University of Karlsruhe in cooperation with aquintos GmbH and AVL List GmbH. The development process of a hybrid powertrain is shown as an example.
Similar content being viewed by others
References
VDI-Richtlinie 2206 Juni 2004: Entwicklungsmethodik für mechatronische Systeme
Albers, A.; Schyr, C.: Model Based Verification of Automotive Powertrains. 15th International Conference on Engineering Design, Melbourne, 2005
Albers, A.; Schyr, C.: Modellbasierte Produktvalidierung mittels Integration von funktionalen und physikalischen Beschreibungen. In: HNI (Hrsg.): Tagungsband 4. Paderborner Workshop Entwurf mechatronischer Systeme. Paderborn, Heinz-Nixdorf-Institut, 2006 (HNI-Verlagsschriftenreihe Band 189)
SysML: System Modelling Language Specification Version 1.0, http://www.sysml.org, Stand 2006-11-01
Müller-Glaser, K. D.; Frick, G.; Sax, E.; Kühl, M.: Multiparadigm Modeling in Embedded Systems Design; IEEE Transactions on Control Systems Technology, Vol. 12, No. 2 (March), 2004, pp. 279–292
Kühl, M.; Reichmann, C.; Wolff, H.-J.: Entwurfsbegleitende Modelltransformation - Automatisierung von Werkzeugübergängen durch den Einsatz von regelbasierten Modelltransformationen. AUTOREG - Steuerung und Regelung von Fahrzeugen und Motoren, Wiesloch, 2006 (VDI-Berichte 1931)
Modelica: Modelica Language Specification Version 2.2, http://www.modelica.org, Stand 2006-11-01
Böhl, J.; Kücükay, F.; Pollak, B.; Gschweitl, K.; Bek, M.: Effiziente Entwicklungswerkzeuge zur Motor- und Getriebeapplikation. Getriebe in Fahrzeugen, Friedrichshafen, 2006 (VDI-Berichte 1943).
Häußler, P.; Albers, A.: Shape optimization of structural parts in dynamic mechanical systems based on fatigue calculations. In: International Journal of Structural and Multidisciplinary Optimization, Vol. 29, No. 5 (2005) p. 361–373
Albers, A.; Schyr, C.: Modellgestützte Erprobungsmethodik in der Antriebsstrangentwicklung. Erprobung und Simulation in der Fahrzeugentwicklung, Würzburg, 2005 (VDI-Berichte 1900)
Rights and permissions
About this article
Cite this article
Albers, A., Müller-Glaser, K., Schyr, C. et al. Model-based powertrain development. ATZ Worldw 109, 15–17 (2007). https://doi.org/10.1007/BF03224909
Issue Date:
DOI: https://doi.org/10.1007/BF03224909