Abstract
TiNi/A16061 shape memory alloy (SMA) composite was fabricated by hot press method to investigate the microstructure and mechanical properties. Interface bonding between TiNi reinforcement and A1 matrix was observed by using SEM and EDS. Pre-strain was imposed to generate compressive residual stress inside composite. A tensile test for specimen, which underwent pre-strain, was performed at high temperature to evaluate the variation of strength and the effect of pre-strain. It was shown that interfacial reactions occurred at the bonding between matrix and fiber, creating two inter-metallic layers. And yield stress increased with the amount of pre-strain. Acoustic Emission technique was also used to nondestructively clarify the microscopic damage behavior at high temperature and the effect of pre-strain of TiNi/A16061 SMA composite.
Similar content being viewed by others
References
Ahn, S. H. and Nam, K. W., 2003, “Characteristics of Elastic Waves Generated by Fatigue Crack Penetration and Growth in an Aluminum Plate,”KSME Journal, Vol. 17, No. 11, pp. 1599–1607.
Ahrens, M, 1999, “Structural Integration of Shape Memory Alloys for Turbomachinery Applications, ”Proceedings of SPIE Smart Structures and Materials 1999 Industrial and Commercial Applications of Smarts Structures Technologies, pp. 426–435.
Emel’yanov, Yu. S., Batist, De., Golyandin, Kustov, S., Nikanorov, Pugachev, Sapozhnikov, G.K., Schaller, R.. Sinani, A. and Van Humbeeck, J., 2000, “Detection of Shock-Wave-Induced Internal Stresses in Cu-Al-Ni Shape Memory Alloy by Means of Acoustic Technique,”Scripta Materialia 43 (12), pp. 1051–1057.
Enoki, M., Kishi, T. and Ohtake, S., 2001, “Classification of Micro-Fracture Process Type in Glass Matrix Composites by Quantitative Acoustic Emission Method,”Materials Transactions, Vol. 42, No. 1, pp. 108–113.
Fregonese, M., Cetre, Y., Idrissi, H., Mazille, H. and Renaud, L., 2001, “Monitoring Pitting Corrosion of AISI 316L Austenitic Stainless Steel by Acoustic Emission Technique: Choice of Representative Acoustic Parameters,”J. of Materials Science, Vol. 36, No. 3, pp. 557–563.
Garcia, J. R., 2000, “Stabilization of Martensite in Cu-Zn-Al Shape Memory Alloys: Effects of Precipitates and Thermal Cycling,”Scripta Materialia 42 (6), pp. 531–536.
Kashiwagura, N., Iwata, S., Jin, J. Y., Kamioka, H. and Ohsawa. Y., 2000, “Ultrasonic Behavior of Ti0.49-Ni0.51 Shape Memory Alloy Between 0°C and 90°C,”Japanese Journal of Applied Physics Part 1-Regular Papers Short Notes & Review Papers, Vol. 39, No. 5B, pp. 2928–2932.
Liu, M., Liu, L., Li, Y. Y., Shelyakov, A. V. and Zhang, X. M.. 2000, “In Situ TEM Observations of Martensite-Austenite Transformations in a Ni49Ti36Hf15 High Temperature Shape Memory Alloy,”J. of Materials Science Letters, Vol. 19, No. 15, pp. 1383–1386.
Oguocha, INA., Radjabi, M. and Yannacopoulos, S., 2000, “The Effect of Cooling Rate on the Quench Sensitivity of 2618 A1/A12O3 MMC,”J. of Materials Science, Vol. 35, No. 22, pp. 5629–5634.
Park, B. G., Crosky, A. G. and Hellier, A. K., 2001, “Material characterization and Mechanical Properties of A12O3A1 Metal Matrix Composites,”J. of Materials Science, Vol. 36. No. 10, pp. 2417–2426.
Shimoo, T., Okamura, K., Seguchi, T. and Tsukada, I., 1999, “Thermal Stability of Low-SiC Fiber (Hi-Nicalon) Treated in a Hot Isostatic Press,”J. of Am Ceram Soc, Vol. 82, No. 12, pp. 3508–3512.
Smagin, G., 1999, “Nonlinear Absorption of Longitudinal Elastic Waves in Dislocationless Crystals,”Proceedings of the 1999IEEE Ultrasonic Symposium- Vol. 1, pp. 553–556.
Sukhodolsky, T. and Sukhodolsky, P. A., 1998, “Coherent Neating of Vector Waves in Active Spectroscopy of Elastic Light Scattering,”Proceedings of SPIE ICONO’98-Laser Spectroscopy and Optical Diagnostics : Novel Trends and Applications in Laser Chemistry, Biophysics, and Biomedicine, pp. 101–108.
Yano, T., Budiyanto, K., Iseki, T. and Yoshida, K., 1998, “Fabrication of Silicon Carbide Fiber-Reinforced Silicon Carbide Composite by Hot-Pressing, ”Fusion Engineering & Design, Vol. 41, pp. 157–163.
Zyuryukin, Yu. A., 1999, “Coupled-Wave Method in the Theory of Light Diffraction by Elastic Waves in Crystals.”Proceedings of SPIE Saratov Fall Meeting ’99-Laser Physics and Spectroscopy, pp. 162–173.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Park, YC., Lee, JK. Fabrication and AE characteristics of TINI/A16061 shape memory alloy composite. KSME International Journal 18, 453–459 (2004). https://doi.org/10.1007/BF02996110
Received:
Revised:
Published:
Issue Date:
DOI: https://doi.org/10.1007/BF02996110