Abstract
Monolithic realizations of general telecommunications systems require high-performance internal circuits. To achieve these results digital and analog solutions are available. The general trend is toward digital implementations which guarantee high density and easy design. However, in each overall system there are some blocks requiring necessary an analog solution. Furthermore the entire system performance is often strictly dependent on the performance of the analog section. In this paper the role of analog blocks in three telecommunications systems (ISDN, line card and telephone set) is described.
Résumé
Trois exemples illustrent ľ emploi de circuits intégrés analogiques: blocs rnis tels que le bloc ďinterface U, qui connecte la ligne ďabonné à deux fils avec ľenvironnement à quatre fils de chaque côté et le bloc dit « Combo » (codec-filtre); carte de ligne combinant celui-ci et le joncteur ďabonné (SLIC); poste téléphonique.
Similar content being viewed by others
References
Batruni (R.),et al. Mixed digital/analog signal pro-esing for a single-chip 2B1Q U-interface transceiver.ISSCC Dig. Tech. Papers (Feb. 1990), pp. 26–27.
Colbeck (R. P.),et al. A single-chip 2B1Q U-interface transceiver.IEEE J. Solid State Cir. (Dec. 1989),24, pp. 1614–1624.
Sallaerts (D.),et al. A single-chip U-interface transceiver for ISDN.IEEE J Solid State Cir. (Dec. 1987),22, pp. 1011–1021.
Aggazi (O.), Adan (A. A.). An analog front-end for full-duplex digital transceiver working on twisted pairs.IEEE J Solid State Cir. (Apr. 1989),24, pp. 229–236.
Ramet (S.). A 13-bit, 160 kHz differential analog-to-digital converter.ISSCC Dig. Tech. Papers (Feb. 1989), pp. 20–21.
Khorramabadi (H.). A CMOS line-driver with 80 dB linearity for ISDN applications.IEEE J. Solid State Cir. (Apr. 1992),27, nº 4, pp. 539–544.
Castello (R.), Nicollini (G.), Monguzzi (P.). A high-linearity 50-Ω CMOS differential driver for ISDN applications.IEEE J. Solid State Cir. (Dec. 1991),26, nº 12, pp. 1809–1816.
Nicollini (G.),et al. A 5 V cmos programmable acoustic frontend for ISDN terminals and digital telephone sets.ESSCIRC (1992).
Friedman (V.),et al. A dual-channel voice-band pcm codec using SD modulation technique.IEEE J. Solid State Cir. (Apr. 1989), pp. 274–280.
Smolka (G. J.),et al. A 384 kbit/s burst transceiver.IEEE J. Solid State Cir. (Dec. 1987),226, pp. 1004–1010.
Castello (R.),Lari (F.),Siliconi (M.),Tomasini (L.) 100 V high performance amplifiers in BCD technology for Slic applications.Proc. ESSCIRC’90, Grenoble (1990), pp. 33–36.
Consiglio (P.),Clerici (G. C),Vanalli (G. P.),Antonini (C). A single-chip telephone line interface in bcd technology.ISSCC Dig. Tech. Papers (Feb. 1992).
Castello (R.),Tomasini (L.). A Bicmos speech circuit with only two external components.ESSCIRC (1992).
Castello (R.), Tomasini (L.). 1.5 V high-performance sc filters in Bicmos technology.IEEE J. Solid State Cir. (July 1991),26, pp. 930–936.
Adachi (T.),Ishtnawa (A.),Barlow (A.),Takasuka (K.). A 1.4 V switched capacitor filter.Proc. CICC, Boston (May 1990).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Castello, R., Baschirotto, A. Analog blocks in telecommunications systems. Ann. Télécommun. 48, 413–419 (1993). https://doi.org/10.1007/BF02995467
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF02995467