Abstract
The industrial beneficial effects of nano-structured surface modification of tool steel (SKD 61) have been studying. Ultrasonic cold forging technology (UCFT) is one of severe plastic deformations for the improvement of mechanical properties by making nano-structure on surface. The basic mechanism of UCFT and experimental device for treatment of trimmer knives (SKD 61) are presented. Test results of UCFT treated knives in cold steel milling line and analysis why the improved service life is achieved are explained.
Similar content being viewed by others
References
Alexandrov, V., Dubravina, A. A. and Kim, H. S., 2002, Defect and Diffusion Forum 208-209, 229.
Hall, E. O., 1953, Proceedings of Physical Society of London, B64, 1951, 747: Petch NJ,Journal of Iron and Steel Institute, 174, 25.
Han, C. H., Pyoun, Y. S. and Kim, C. S., 2002, “Ultrasonic Micro-burnishimg in View of Ecomaterials Processing,”ATM, Vol. 4[l], pp. 25–28.
Kaloshkin, S. D., 2002, Formation of Powder and Bulk Al-Cu-Fe Quasicrystals, and of Related Phases During Mechanical Alloying and Sintering, Proceedings of the Conferece, Nanomaterials by Severe Plastic Deformatin.
Mirtich, M. J., 1981: Sputtered Protective Coating for Die-casting die, Thin Sokid Films, 295, 84.
Pye, D., 1997, Nitriding Techniques and Methods, Steel Heat Treatment Handbook, G. E Totten and M. A. H. Howes, Ed., Marcel Dekker, pp. 721-764.
Pyoun, Y. S., Han, C. H. and Azuma, N., 2001, “A Development of an Automated Super Surface Finishing System for the 3D Sculptured Surface of Mold and Dies using Ultrasonic Micro Burnishing Technology,” Proceeding of the 32nd ISR.
Pyoun, Y. S., 2003, An application of micro cold forging technololgy using ultrasonic energy for the nano level surface texture and the improved mechanical properties, Korea-Japan international nano-symposium.
Segal, M., 1995, Mater, Sci. Eng. A 271, 322.
Toith, L. E., 1971, Transition Metal Carbides and Nitrides, Academic Press, New York.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Cho, I.H., Song, G.H., Kim, C.S. et al. Nano structured surface modification of tool steel and its beneficial effects in mechanical properties. J Mech Sci Technol 19, 2151–2156 (2005). https://doi.org/10.1007/BF02916512
Received:
Revised:
Issue Date:
DOI: https://doi.org/10.1007/BF02916512