Abstract
Porous iron electrodes containing metal additives have been used in nickel-iron cells. The impedances of these electrodes were measured over a wide range of frequency 104 Hz to 10−2 Hz in 6 M KOH + 0·63 M LiOH solutions. Using a cylindrical pore model, porosity and its related parameters were calculated. It is found that Hg and S provide favourable porosity and thus enhance the discharge capacity.
Similar content being viewed by others
References
Bryant W A 1970J. Electrochem. Soc. 126 1899
Candy J P and Fouilloux P 1981Electrochim. Acta 26 1029
Delevie R 1967Advances in electrochemistry and electrochemical engineering (eds.) P Delabay (New York: Interscience) vol. 5, p. 329
Gabrielli C 1984 Identification of electrochemical processes by frequency response analyser, Technical Report number 004/83, Solatron Instruments, France
Handy J, McBaris J M and Stonehast P 1976J. Appl. Electrochem. 6 371
Hordman C C 1972 Westinghouse Electric Corporation, US Pat 3679482
Jayalakshmi M and Muralidharan V S 1991Br. Corros. J. 26 123
Jayalakshmi M and Muralidharan V S 1990J. Power Sources 32 341
Jayalakshmi M and Muralidharan V S 1991Indian J. Technol. (in press)
Linden D 1984Handbook of batteries and fuel cells (New York: McGraw-Hill) vol. 20, p. 1
Lindstorm O B 1978US Patent 4078120
Micka K and Zabransky Z 1987J. Power Sources 19 315
Muralidharan V S and Veerashunmugamani 1985J. Appl. Electrochem. 15 675
Ojefors L 1976Electrochim. Acta 21 302
Paruthimal Kalaignan G, Muralidharan V S and Vasu K I 1987J. Appl. Electrochem. 17 1083
Vassie P R and Tseung A C C 1976Electrochim. Acta 21 263
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Jayalakshmi, M., Muralidharan, V.S. Electrochemical characterisation of porous iron electrodes. Proc. Indian Acad. Sci. (Chem. Sci.) 103, 753–761 (1991). https://doi.org/10.1007/BF02867329
Received:
Revised:
Issue Date:
DOI: https://doi.org/10.1007/BF02867329