Abstract
The microstructural features such as cleanliness, defect density, and phase morphology play important roles in the fracture process and these microstructural variables can be controlled by steel refining and heat treatment techniques. Some of the recent attempts of improving the mechanical properties of AISI 4340 steel by controlling the microstructural features mentioned above have been briefly reviewed.
Similar content being viewed by others
References
K.H. Schwalbe:Engg. Fract. Mech., 1977, vol. 9, pp. 795–832.
M. G. H. Wells and J. Hauser: “Fracture Prevention and Control”,American Society of Metals, 1972, pp. 199–224.
A.J. Birkle, R. P. Wei, and G. E. Pellissier:Trans. A. S. M., 1966, vol. 5, p. 981.
T. Gladman, B. Holmes, and I. D. Mclvor: “Effect of Second Phase Particles on Mechanical Properties of Steel”, Iron and Steel Institute, London, 1971.
M. G. Hebsur, K. P. Abraham, and Y. V. R. K. Prasad:Engg. Fract. Mech., 1980, vol. 13, no. 4, pp. 851–63.
M.G. Hebsur, K.P. Abraham, and Y. V.R.K. Prasad:Journal of Mech. Working Tech., 1981, vol. 4, pp. 341–49.
R.P. Wei:ASTM, STP, 1965, no. 381, p. 279.
E.R. Parker:Metall. Trans., 1977, vol. 8A, pp. 1025–42.
R.M. Horn and R. O. Ritchie:Metall. Trans., 1978, vol. 9A, pp. 1039–53.
V.F. Zackay: L. B.L. Report, no. 3595, 1975, Univ. of California, Berkeley, CA.
G. Y. Lai, W. E. Wood, R. A. Clark, V. F. Zackay, and E. R. Parker:Metall. Trans., 1974, vol. 5, pp. 1663–70.
W.E. Wood:Engg. Fract. Mech., 1975, vol. 7, pp. 219–36.
K.H. Khan and W.E. Wood:Metall. Trans., 1978, vol. 9A, pp. 899–907.
R. O. Ritchie, B. Francis, and W. L. Server:Metall. Trans., 1976, vol. 7A, pp. 831–38.
R.O. Ritchie and R.M. Horn:Metall. Trans., 1978, vol. 9A, pp. 331.
J.L. Youngblood and M. Raghavan:Metall. Trans., 1977, vol. 8, pp. 1639.
D. S. McDarmaid:Metals Technol., 1978, vol. 6, pp. 7–16.
S.K. Banerji, C.J. McMahon, and H.C. Feng:Metall. Trans., 1978, vol 9, p. 237.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Hebsur, M.G. Recent attempts of improving the mechanical properties of AISI 4340 steel by control of microstructure — A brief review. JMES 4, 28–37 (1982). https://doi.org/10.1007/BF02833379
Issue Date:
DOI: https://doi.org/10.1007/BF02833379