Abstract
The effect of the composition of temporary technological binders (TTB) based on polyelectrolytes on the properties of plastic mixtures and air-dried semiproducts is considered. The TTB are rigid-chain polyacrylic acid and flexible-chain polybutylmethacrylate, nonionogenic methylcellulose, and polyvinyl alcohol, including those modified by aqueous dispersions (latexes). The parameters of the extent of the boundary layer and the coefficient of its compression are shown to be effective criteria for choosing TTB
Similar content being viewed by others
References
Yu. S. Lipatov and L. M. Sergeeva,Adsorption of Polymers [in Russian], Naukova Dumka, Kiev (1972).
Yu. E. Pivinskii,Ceramic Binders and Ceramic Castables [in Russian], Metallurgiya, Moscow (1990).
Yu. M. Mosin, A. F. Krivoshchepov, G. G. Shikhieva, and A. V. Bulynko, “Formation of oxide — solution of high-molecular compound interphase,”Steklo Keram., No. 9, 27–30 (1997).
Yu. M. Mosin and G. G. Shikhieva, “Optimization of binder compositions for plastic corundum mixtures,”Steklo Keram., No. 7, 19–22 (1998).
Water in Disperse Systems [in Russian], Khimiya, Moscow (1989).
Coagulation Contacts in Disperse Systems [in Russian], Khimiya, Moscow (1982).
M. S. Komskaya, A. I. Dolin, and P. V. Kolotiy,New Methods for Control over Processing of Ceramic Mixtures [in Russian], Budivel’nik, Kiev (1975).
V. L. Balkevich, Yu. M. Mosin, and M. N. Firsova, “Determination of plastic strength for evaluating the molding properties of ceramic mixtures,”Steklo Keram., No. 4, 16–17 (1980).
S. V. Kapkov, Yu. M. Mosin, and G. G. Shikhieva, “Special features of drying semiproducts obtained by plastic molding,”Steklo Keram., No. 5, 18–21 (1996).
Yu. E. Pivinskii and A. G. Romashin,Quartz Ceramics [in Russian], Metallurgiya, Moscow (1974).
Z. A. Rogovin,The Chemistry of Cellulose [in Russian], Khimiya, Moscow (1972).
V. L. Balkevich and Yu. M. Mosin, “Structure of concentrated suspensions of oxides and their use in the technology of ceramics and refractories,” in:Coll. Works of MKhTI Im. D. I. Mendeleeva, Issue 118 [in Russian], Moscow (1981), pp. 34–39.
Yu. M. Mosin and V. G. Leonov, “Rheological properties of plastic mixtures of aluminum nitrides on waterless temporary binders,”Ogneupory, No. 12, 17–19 (1991).
S. P. Nichiporenko,Basic Problems in the Theory of Processing and Molding Ceramic Mixtures [in Russian], Izd. Akad. Nauk UkrSSR, Kiev (1960).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Mosin, Y.M., Shikhieva, G.G. Effect of the boundary-layer parameters on technological properties of various oxide mixtures and semiproducts obtained by plastic molding. Refract Ind Ceram 40, 341–346 (1999). https://doi.org/10.1007/BF02762584
Issue Date:
DOI: https://doi.org/10.1007/BF02762584