Abstract
Surface structure of thin silver films (200 Å) on two technologically important films, indium tin oxide (ITO) and aluminium oxide, has been studied using scanning tunneling microscope. ITO films were prepared by reactive electron beam evaporation. Aluminium oxide films were prepared by oxidizing 2000 Å thick aluminium films evaporated on to H2 terminated single crystal silicon substrates. The surface structure of silver on ITO and aluminium oxide appeared to be same and was characteristic of Stranski-Krastanov type. The observed asymmetry in the island shape was attributed to the anisotropic nature of the strain fields surrounding the nucleation centres.
Similar content being viewed by others
References
Chopra K L 1969Thin film phenomena (New York: Mc Graw-Hill)
Gimzewski J K, Humbert A, Bednorz J G and Reihl B 1985Phys. Rev. Lett. 55 51
Hamberg I and Granqvist C G 1986J. Appl. Phys. 60 R123
Kaiser J and Bell L D 1988Phys. Rev. Lett. 60 1406
Komiyama M, Kirino M and Kurokawa H 1994J. Vac. Sci. Technol. B12 1869
Kubby J A and Greene W J 1994J. Vac. Sci. Technol. A12 2009
Rao M V H and Mathur B K 1991Indian J. Pure & Appl. Phys. 31 574
Van De Leemput L E C, Van Bentum P J M, Schreurs L W M and Van Kempen H 1988Physica C152 99
Weisendanger 1994Scanning probe microscopy and spectroscopy 1994 (Cambridge: Cambridge University press)
Author information
Authors and Affiliations
Additional information
Paper presented at the poster session of MRSI AGM VI, Kharagpur, 1995
Rights and permissions
About this article
Cite this article
Kasiviswanathan, S., Asoka Kumar, P.S., Mathur, B.K. et al. Surface structure of silver thin films on In2O3:Sn and Al2O †3 . Bull. Mater. Sci. 19, 411–416 (1996). https://doi.org/10.1007/BF02744677
Issue Date:
DOI: https://doi.org/10.1007/BF02744677