Abstract
The dynamic yielding of an Fe-0.17 pct Ti alloy at 298° and 77° has been determined in shock compression experiments. The material was used as annealed and also after 52 pct reduction by cold-rolling. Cold-rolling did not change the dynamic yield point which was about 14 kbar at 298~ and 18 kbar at 77°K. Prior cold work did, however, completely suppress twinning, and an associated yield drop believed to be due to twinning. The dynamic yielding data on the cold-rolled material are uncomplicated by deformation twinning. These data can thus be analyzed on the basis of a simple dislocation dynamics model which has been previously applied to other metallic systems.
Similar content being viewed by others
References
J. W. Taylor and M. Rice: J. Appl. Phys., 1963, vol. 34, pp. 364–71.
O. E. Jones, F. W. Neilson, and W. B. Benedick: J. Appl Phys., 1962, vol 33, pp. 3324–32
J. R. Holland: Acta Met, 1967, vol 15, pp. 691–99.
L. M. Barker, B M. Butcher, and C. H. Karnes: J. Appl. Phys, 1966, vol. 37, pp. 1989–91.
R. W. Rohde: Acta Met., 1969, voL 17, pp. 353–63.
O. E. Jones and J. D. Mote: J Appl. Phys., 1969, vol. 40, pp. 4920–28.
J N. Johnson, O. E. Jones, and T. E Michaels: J Appl. Phys., 1970, vol 41, pp. 2330–39.
B. M. Butcher and D. E. Munson. Dislocation Dynamics, A R. Rosenfield, G. T. Hahn, A. L. Bement, and R I. Jaffee, eds., pp. 591–607, McGraw-Hill, N. Y., 1968.
J. J. Gilman: Appl. Mech. Rev, 1968, vol. 21, pp 767–83
J. W. Taylor J. Appl. Phys., 1965, vol. 36, pp. 3146–50.
B. M Butaher and C. H. Karnes: J Appl. Phys., 1966, vol 37, pp 402–11.
J. N. Johnson and W. Band: J. Appl. Phys, 1967, vol. 38, pp. 1578–85.
W. Herrmann, D. L. Hicks, and E. G. Young: Proc. 17th Sagamore Materials Sci. Conf., 1970, Syracuse Univ. Press, N. Y., to be pubhshed.
A. P. L. Turner and T. Vreeland, Jr.: Acta Met, 1970, vol. 18, pp. 1225–35
D. F. Stein and J R. Low, Jr.: J. Appl. Phys, 1960, vol. 31, pp. 362–69.
R. W. Rohde and J. N. Johnson: Proc. Second Int. Conf. on the Strength of Metals andAnoys, ASM, Metals Park, Ohio, 1970, pp. 985–89.
R. A. Graham, F. W. Neilson, and W. D. Benedick. Z Appl. Phys, 1965, vol. 36, pp. 1775–83.
W. C. Leslie and R. J. Sober: Trans. ASM, 1967, vol 60, pp. 99–111.
W. A. Spitzig and W. C. Leslie, Acta Met, in press.
A. S. Keh, Direct Observation of Imperfections in Crystals, J. B. Newkirk and J. H. Wernick, eds., pp. 213–38, Interscience, N. Y., 1962.
G. E. Ingram and R. A. Graham, Proc 5th Detonatton Symp., August 18, 1970, Pasadena, Calif., in press.
O. E. Jones, Rev. Sci. Inst., 1967, vol. 38, pp. 253–56.
A L. Stevens and O. E. Jones: J. Appl. Mech., in press, presented at Applied Mechanics Western Conference, Aug 23–25, 1971. ASME reprint #71-APMW-16.
C. S. Smith: Response of Metals To High Velocity Deformation, P. G Shewmon and V. F. Zackay, eds., pp. 483–86, Interscience, N Y., 1960.
L. E. Malvern, Quart. Appl. Math., 1951, vol. 8, pp. 405–11.
J. N. Johnson, J. Appl. Phys., 1969, vol. 40, pp. 2287–93.
J. N. Johnson and L. M Barker, J. Appl. Phys., 1969, vol. 40, pp. 4321–34
H. D. Solomon, C. J. McMahon, and W. C. Leslie. Trans. ASM, 1969, vol 62, pp. 886–90.
H. D. Solomon and C. J. McMahon: Acta Met, 1971, vol. 19, pp. 291–302.
T. Imvra, H. Saka, and N. Yukawa: J. Phys Soc. Japan, 1969, vol, 26, p. 1327.
Author information
Authors and Affiliations
Additional information
A correction to this article is available at http://dx.doi.org/10.1007/BF02642772
Rights and permissions
About this article
Cite this article
Rohde, R.W., Leslie, W.C. & Glenn, R.C. The Dynamic Yield Behavior of Annealed and Cold-Worked Fe-0.17 Pct Ti Alloy. Metall Trans 3, 323–328 (1972). https://doi.org/10.1007/BF02684852
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/BF02684852