References
J. H. Bechtold:Trans. AIME, 1953, vol. 197, pp. 1469–75.
R. C. Koo:Trans. TMS-A1ME, 1963, vol. 227, pp. 280–82.
R. T. Ault:Trans. TMS-AIME, 1964, vol. 230, pp. 1443–53.
A. Gilbert:J. Less-Common Metals, 1966, vol. 10, pp. 328–43.
L. Meyers, Jr., G. Y. Onoda, Jr., A. V. Levy, and R. J. Katfila:Trans. TMS-AIME, 1965, vol. 233, pp. 720–28.
A. P. Valintine and D. Hull:J. Less-Common Metals, 1969, vol. 17, pp. 353–59.
J. C. Thornley and A. S. Wronski:Acta Metall., 1970, vol. 18, pp. 1053–60.
W. D. Klopp:J. Less-Common Metals, 1975, vol. 42, pp. 261–78.
C. L. Briant and S. K. Banerji:Int. Met. Rev., 1978, vol. 23, no. 4, p. 164.
J. Kameda and C. J. McMahon, Jr.:Metall. Trans. A, 1980, vol. 11A, pp. 91–101.
S. Takayama, T. Ogura, Shin-Cheng Fu, and C. J. McMahon, Jr.:Metall. Trans. A, 1980, vol. 11A, pp. 1513–30.
M. Jokl, V. Vitek, and C. J. McMahon, Jr.:Acta Metall., 1980, vol. 28, pp. 1479–88.
J. Kameda and C. J. McMahon, Jr.:Metall. Trans. A, 1981, vol. 12A, pp. 31–37.
J. F. Moulder and A. Joshi:Metall. Trans. A, 1981, vol. 12A, pp. 1140–43.
T. G. Nieh and W. D. Nix:Metall. Trans. A, 1981, vol. 12A, pp. 893–901.
C. Loier and J. Y. Boos:Metall. Trans. A, 1981, vol. 12A, pp. 1223–33.
R. H. Bricknell, R. A. Mulford, and D. A. Woodford:Metall. Trans. A, 1982, vol. 13A, pp. 1223–32.
B. W. Shen: Ph.D. Dissertation, State University of New York, Stony Brook, NY, 1981.
P. Beardmore and D. Hull:J. Inst. Metals, 1966, vol. 94, pp. 14–18.
P.C. Paris and G. Sih: inFracture Toughness Testing and its Applications, Committee E-24 on Fracture Testing of Metallic Materials, ASTM STP 381, 1965, p. 47.
E. Reissner:Transactions ASME, J. Applied Mechanics, 1945, vol. 12, pp. A69-A77.
H. Margolin, K. Hashimoto, and H. Yaguchi:Scripta Metall., 1981, vol. 15, pp. 181–84.
G. T. Hahn and A. R. Rosenfield:Trans. ASM, 1966, vol. 59, pp. 909–19.
D. L. Rohr, L. E. Murr, and S. S. Hecker:Metall. Trans. A, 1979, vol. 10A, pp. 399–405.
L. E. Murr:Interfacial Phenomena in Metals and Alloys, Addison Wesley Publ. Co., Reading, MA, 1975, pp. 203–08.
T. Malis and K. Tangri:Acta Metall., 1979, vol. 27, pp. 25–32.
L.E. Murr:Scripta Metall., 1979, vol. 13, pp. 167–71.
I. M. Bernstein and B. B. Rath:Metall. Trans., 1973, vol. 4, pp. 1545–51.
G.R. Irwin:Trans. ASME, J. Appl. Mech., 1962, vol. 29, p. 651.
Author information
Authors and Affiliations
Additional information
Formerly with the State University of New York at Stony Brook
Formerly with the State University of New York at Stony Brook
Rights and permissions
About this article
Cite this article
Liu, J.M., Shen, B.W. Direct measurement of the work of fracture for grain boundaries of twist misorientation about «100» in tungsten. Metall Trans A 15, 1289–1292 (1984). https://doi.org/10.1007/BF02644725
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/BF02644725