Abstract
This article presents a comparative analysis of contemporary printed wiring assembly (PWA) batch manufacturing systems employing surface mount technology (SMT), This analysis is accomplished by reviewing a typical case study of PWA manufacturing system in the USA. A previously developed model is then applied to the system to predict the cost and performance in the production of typical PWA designs. Various modifications to the system are then proposed and evaluated. From the case study, conclusions concerning optimum manufacturing system configuration for this industry can be drawn and are presented.
Similar content being viewed by others
References
M. R. Driels and J. S. Klegka, “Cost and performance analysis of printed circuit board manufacture using surface mount devices”,International Journal of Advanced Manufacturing Technology,4(1), pp. 72–94, 1989.
G. Boothroyd, C. Poli and L. Murch,Automatic Assembly, Marcel Dekker, New York, 1982.
G. Boothroyd, “Economics of General Purpose Assembly Robots”,Annals of the CIRP, 33(1), pp. 287–290, 1984.
U. J. Fan, “Product design analysis for robotic assembly using extended group technology techniques”, PhD Dissertation. Department of Mechanical Engineering, Texas A&M University, 1988.
L. E. Bussey,The Economic Analysis of Industrial Projects, Prentice-Hall, Englewood Cliffs, NJ, 1978.
E. F. Brigham,Financial Management: Theory and Practice, CBS College Publishing, New York, 1985.
J. S. Klegka, Analysis of printed wiring assembly manufacturing systems”, PhD Thesis, Department of Mechanical Engineering, Texas A&M University, College Station, Texas, August 1989.
L. K. Keys, J. R. Balmer and R. A. Creswell, “Computerised electronics manufacturing process, operations analysis modelling and simulation tools”,Proceedings IEEE 1986 International Electronics Manufacturing Technology Symposium, pp. 67–77.
M. R. Driels and J. S. Klegka, “Analysis of alternative rework strategies for printed wiring assembly manufacturing systems”,Transactions IEEE on Components, Hybrids and Manufacturing Technology, to appear, 1991.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Driels, M., Klegka, J. An analysis of contemporary printed wiring board manufacturing environment in the USA. Int J Adv Manuf Technol 7, 29–37 (1992). https://doi.org/10.1007/BF02602948
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF02602948