Abstract
The previously elaborated methods of the determination of As, Sc, La, Au, W, Mo, Ga and In have been adapted to the analysis of steel. Samples of Armco steel taken from three various points of a steel bar section were analysed. On the basis of the results obtained the distribution of the elements determined along the steel bar section is discussed.
Similar content being viewed by others
Referneces
H. Jaskólska, L. Rowińska, M. Radwan,J. Radioanal. Chem., 7 (1971) 29.
H. Jaskólska, M. Radwan,Isotopenpraxis, 8 (1972) 95.
H. Jaskólska, L. Wódkiewicz, J. Minczewski,Chem. Anal. (Warsaw), 9 (1964) 453.
H. Jaskólska, L. Wódkiewicz, J. Minczewski,Chem. Anal. (Warsaw), 9 (1964) 459.
G. H. Morrison, H. Freiser, Solvent Extraction in Analytical Chemistry (Polish translation), PWN, Warszawa, 1960.
A. Mizuike, T. Kono,Radioisotopes (Tokyo), 19 (1970) No. 12, 61.
C. Leymonie, Les traceurs radioactifs en métallurgie physique, Dunod, Paris, 1960.
L. Walis, M. Radwan,Neue Hütte 17 (1972) 44.
I. N. Golikov, Dendritnaya likvatsia v stali, Metallurgizdat, Moscow, 1958.
H. J. Eckstein, H. J. Spies, Dendritenmorphologie und Mikroseigerung bei dendritischer Erstarrung von Stahl, Kristallisation, VEB Deutscher Verlag für Grundstoffindustrie, Leipzig, 1969.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Jaskólska, H., Rowińska, L., Waliś, L. et al. Determination of trace amounts of some elements in armco steel by the neutron activation method. J. Radioanal. Chem. 13, 41–52 (1973). https://doi.org/10.1007/BF02514108
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF02514108