Abstract
Surface originated kink bands consist of an important failure mode for fibre-reinforced composites under compression. The mechanical behavior of the fibre bridging kink bands is explored herein in the context of the post-microbuckling theory. Expressions of bridging force are obtained for the entire postbuckling process of the fibres exhibiting weak or strong hardening. The postbuckling formulation of the fibres is applied to yield the toughness increment due to the advancing kink bands, and consequently leads to a quantitative prediction on the overall compressive stress strain curves of the fibre-reinforced composites.
Similar content being viewed by others
References
Kulkarni SV, Rice JS and Rosen BW. An Investigation of the Compressive Strength of PRD-49-III/Epoxy Composites. NASA-CR-112334, 1973
Weaver CW and Williams JG.J Mater Sci, 1975, 10: 1323
Piggot MR and Harris B.J Mater Sci, 1980, 15: 2523
Rosen BW. In: Fiber Composite Materials. Am Soc Metals Seminar, 1965, Chap 3
Wei YG and Yang W.Acta Aero et Astro Sinica, 1992, 13: A388
Yang W and Wei YG.Int J Damage Mech, 1992, 1: 80
Hutchinson JW.J Mech Phys Solids, 1973, 21: 161–191
Cox BN and Marshall DB.Int J Fracture, 1991, 49: 159
Van der Heijden AMA.J Mech Phys Solids, 1979, 27: 441
Budiansky B and Amazigo C.J Mech Phys Solids, 1989, 37: 93
Budiansky B, Hutchinson JW and Evans AG.J Mech Phys Solids, 1986, 34: 167
Wei YG. Micromechanics for the compressive failure of fiber reinforced composites. Ph D Dissertation, Beijing: Tsinghua University, 1992, Chap 3
Author information
Authors and Affiliations
Additional information
The project supported by the National Natural Science Foundation of China
Rights and permissions
About this article
Cite this article
Yueguang, W., Wei, Y. Post-microbuckling of fibre bridging kink bands under compression. Acta Mech Sinica 9, 33–43 (1993). https://doi.org/10.1007/BF02489160
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF02489160