Abstract
Ceramic materials processing consists of powder preparation and fabrication of components by using these powders. Conventional powder preparation and fabrication of ceramic components along with novel methods are reviewed.
Similar content being viewed by others
References
J. C. FARRANT and R. NORTH, “Chemical Engineering Practice”, Vol. 3, edited by H. Cremer and T. Davis (Butterworths, London, 1957).
S. J. GREGG,Chem. Ind. (1968) 611.
C. GRESKOVICH, “Treatise in Materisl Science and Technology”, Vol. 9, edited by F. F. Y. Wang (Academic Press, New York, 1976).
J. J. DIH, PhD Thesis, University of California (1976).
D. A. LEE,Amer. Ceram. Soc. Bull. 53 (1974) 232.
J. THOMPSON, Jr., —ibid.53 (1974) 421.
F. K. ROEHRIG and T. R. WRIGHT,J. Vac. Sci. Tech. 9 (1972) 1368.
D. W. JOHNSON, Jr.,Amer. Ceram. Soc. Bull. 60 (1981) 221.
W. GITZEN, “Alumina as a ceramic material” (American Ceramic Society, Columbus, Ohio, 1970).
M. MURATA, K. WAKINO, K. TANAKA and Y. HAMAKAWA,Mater. Res. Bull. 11 (1976) 323.
A. GOLDMAN and A. M. LAING,J. Phys. (Paris) Colloq. 1 (1977) 297.
R. J. DeANGELIS and P. J. REUCROFT,J. Appl. Phys. 48 (1977) 5296.
J. S. REED and R. B. RUNK, in “Treatise in Materials Science and Technology”, Vol. 9, edited by F. F. Wang (Academic Press, New York, 1976).
F. H. NORTON, “Elements of Ceramics” (Addison-Wesley, Reading, Massachussets, 1952).
J. N. HARRIS and E. A. WELSH, “Fused Silica Design Manual”, Vol. 1 (Engineering Experimental Station, Georgia Institute of Technology, 1973).
W. G. GARRETT and L. S. WILLIAMS,J. Amer. Ceram. Soc. 43 (1960) 114.
R. E. COWEN, “Treatise in Materials Science and Technology”, Vol. 9, edited by F. F. Wang (Academic Press, New York, 1976).
E. SMITH, US Patent 2 942 991 (1960).
G. V. SAMSONOV and A. G. DOBROVOLSKI,Refractories (transl. Russian)6 (1966) 369.
C. R. MASSON, S. G. WHITEWAY and C. A. COLLINGS,Amer. Ceram. Soc. Bull. 42 (1963) 745.
P. E. REMPES, US Patent 2 990 292 (1961).
P. D. S. ST. PIERRE,Res. App. Ind. 12 (1959) 460.
G. N. HOWATT, R. G. BRECKENRIDGE and J. M. BROWNLOW,J. Amer. Ceram. Soc. 30 (1947) 237.
D. J. SHANEFIELD and R. E. MISTLER,Amer. Ceram. Soc. Bull 53 (1974) 416.
J. BIGGERS, T. SHROUT and W. SHULZE, —ibid.58 (1979) 516.
R. B. RUNK and M. J. ANDREJCO, —ibid.54 (1975) 199.
R. T. DRISTINE, Report DOE.EM-78-C-01-5161, US Government Printing Office, 640-258/2464 (1980).
T. D. CLAAR, D. R. BISWAS and D. L. JOHNSON, Report DOE-AC03-78-ET-11276, Institute of Gas Technology, Chicago, CASE-81-943 (1981).
G. C. ROBINSON, “Ceramic Processing Before Firing”, edited by G. Y. Onada and L. L. Hench (John Wiley and Sons, New York, 1978).
A. L. SALAMONE and J. S. REED,Amer. Ceram. Soc. Bull. 58 (1979) 1175.
R. PETT, F. RUNKLE, G. TENNENHOUSE and A. THEODORE, —ibid.61 (1982) 992.
K. SCHWARTRZWALDER, —ibid.28 (1949) 459.
J. MANGELS and R. WILLIAMS, —ibid.62 (1983) 601.
T. J. WHALEN and C. F. JOHNSON, —ibid.60 (1981) 216.
C. R. VEALE, “Fine Powders: Preparation, Properties and Uses” (Applied Science, London, 1972).
R. N. GHOSHTAGORE,J. Electrochem. 125 (1978) 110.
D. R. BISWAS, C. GHOSH and R. LAYMAN, —ibid.130 (1983) 234.
W. CANNON, S. DANFORTH, J. FLINT, J. HAGGERTY and R. MARRA,J. Amer. Ceram. Soc. 65 (1982) 324.
R. F. BADDOUR and B. R. BRONFIN,Ind. Eng. Chem. Proc. Design Devol. 4 (1965) 162.
C. SCHEER and J. KORMAN, “Arcs in Inert Atmospheres and Vacuum”, edited by W. E. Kuhn (Wiley, New York, 1956).
J. HOLMGREN, J. GIBSON and C. SCHEER, “Ultrafine Particles”, edited by W. E. Kuhn (Wiley, New York, 1964).
G. VISSIKOV, K. MANOLOVA and L. BRAKALOV,J. Mater. Sci. Lett. 16 (1981) 1716.
K. TANAKAY, K. SHIPANI, S. TUMOR and T. EGASHINA,J. Mater. Sci. 22 (1987) 2192.
T. B. REED,J. Appl. Phys. 32 (1961) 2534.
T. BARRY, R. BAYLISS and L. LAY,J. Mater. Sci. 3 (1968) 229.
M. GANI and R. McPPHERSON,J. Aust. Ceram. Soc. 8 (1972) 65.
T. YOSHIDA, A. KAWASAKI, K. NAKAGAWA and K. AKASHI,J. Mater. Sci. 14 (1979) 1624.
D. R. BISWAS and P. S. OH,Amer. Ceram. Soc. Bull. 63 (1984) 449.
C. HOLLABAUGH, D. HULL, L. NEWKIRK and J. PETROVIC, —ibid.61 (1982) 814.
M. BOULOS and W. GAUVIN,Can. J. Chem. Eng. 52 (1974) 355.
M. KAWACHI, S. SUDO, N. SHIBATA and T. EDAHIRO,Jap. J. Appl. Phys. 19 (1980) L69.
D. R. BISWAS and D. K. NATH,J. Mater. Sci. Lett. 2 (1983) 245.
D. B. PECK and P. C. SHULTZ, US Patent 3 711 262 (1973).
A. GEORGE, R. MURLEY and E. PLACE,Symp. Fard. Soc. on Fog and Smoke 7 (1973) 63.
S. RAYCHAUDHURI and D. BISWAS,J. Amer. Ceram. Soc. 67 (1984) C57.
R. ROY, —ibid.52 (1969) 344.
K. HABERKO, A. CIESLA and A. PRON.Ceramurgia Intl.,2 (1976) 111.
S. MUKHERJEE, J. ZARZYCKI and J. TRAVERSE,J. Mater. Sci. 11 (1976) 741.
B. YOLDAS, —ibid.14 (1979) 1843.
S. SAKKA and K. KAMIYA in “Emergent Process Methods for High Technology Ceramics”, 19th University Conference, N. C. State University (1982).
E. RABINOVICH, D. JOHNSON, Jr., J. MacCHESNEY and E. VOGEL,J. Non-Cryst. Solids 47 (1982) 435.
M. HOCH and K. NAIR,Amer. Ceram. Soc. Bull. 58 (1979) 187.
K. KOMIYA, T. YOKO and M. BESSITO,J. Mater. Sci. 22 (1987) 937.
U. SUSA, I. MATSUYAMA, S. SATOH and T. SUGANUMA,Elec. Lett. 18 (1982) 499.
S. SHIBATA and M. NAKAHARA, 11th ECOC, 1985.
D. A. YOUNG, “Decomposition of Solids” (Pergamon, New York, 1966).
I. HUSEBY,J. Amer. Ceram. Soc. 66 (1983) 217.
K. MAZDIYASNI, C. LYNCH and J. SMITH, —ibid.48 (1965) 372.
Y. ANDO and R. UYEDA,Commun. Am. Ceram. Soc. 1 (1981) C12.
J. HOLT and D. KINGMAN, in “Emergent Process Methods for High Technology Ceramics”, 19th University Conference, N.C. State University (1982).
R. RUMPUCH, L. STOBIERSKI, J. LIG and M. RACZKA,Mater. Res. Bull. 22 (1987) 1225.
S. HIRANOS,Amer. Ceram. Soc. Bull. 66 (1987) 1342.
C. SMITH and F. ZIMMERMAN, “The Carbide and Tool Journal”, March/April (1980).
H. YEH and P. SIKORA,Amer. Ceram. Soc. Bull. 58 (1979) 444.
M. SHIMADA, K. TANIHATA, T. KABA and M. KOIZUMI, in “Emergent Process Methods for High Technology Ceramics”, 19th University Conference, N. C. State University (1982).
T. YAMADA, M. SHIMADA and M. KOIZUMI,Amer. Ceram. Soc. Bull. 60 (1981) 1225.
P. PANDA and E. SYDEL, —ibid.65 (1986) 338.
D. L. JOHNSON and RIZZO, —ibid.59 (1980) 467.
C. BENNETT, N. McKINNON and L. WILLIAMS,Nature 217 (1968) 1287.
J. KIM and D. L. JOHNSON,Amer. Ceram. Soc. Bull. 62 (1983) 620.
L. CORDONE and W. MARTINSEN,J. Amer. Ceram. Soc. 55 (1972) 380.
G. THOMAS, J. FREIM and W. MARTINSEN,Trans. Amer. Nucl. Soc. 17 (1973) 177.
D. RAYBOULD, D. MORRIS and G. COOPER,J. Mater. Sci. Lett. 14 (1979) 2523.
D. MORRIS,J. Mater. Sci. 17 (1982) 1789.
R. PRUMMER, “Emergent Process Methods for High Technology Ceramics”, 19th University Conference, N.C. State University (1982).
T. SATO, T. ISHII, N. SETAKA,Commun. Amer. Ceram. Soc. (1982) C162.
R. PRUMMER and G. ZIEGLAR,Powder Metall. Intl. 9 (1977) 11.
C. HOENIG and C. YUST,Amer. Ceram. Soc. Bull. 60 (1981) 1175.
E. DOWWHITNEY, “Emergent Process Methods for High Technology Ceramics”, 19th University Conference, N.C. State University (1982).
A. SAWAOKA, K. KONDO, N. HASHIMOTO and S. SAITO, International Symposium on Densification and Sintering of Oxide and Non-Oxide Ceramics, edited by S. Somiya and S. Saito (Tokyo Institute of Technology, Tokyo, 1979).
J. NADEAU,Amer. Ceram. Soc. Bull. 52 (1973) 170.
M. MITOMO,J. Mater. Sci. 11 (1976) 1103.
H. PRIEST, G. PRIEST and G. GAZZA,J. Amer. Ceram. Soc. 60 (1977) 81.
V. ALEKSANDROV, V. OSKIO, A. PROKHOROV and V. TATARINTSEV,Vestnik Akad. Nauk USSR 12 (1973) 29.
J. WENKUS, W. MENASHI and A. CASTONGUAY, US Patent 4 049 389 (1977).
K. NASSAU,Gems Gemology 17 (1981) 9.
D. WHITE, S. CHU, H. HARRISON and H. SATO,Am. Ceram. Soc. Bull. 62 (1983) 385.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Biswas, D.R. Development of novel ceramic processing. J Mater Sci 24, 3791–3798 (1989). https://doi.org/10.1007/BF02385772
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF02385772