Abstract
The interferometric strain gage has a short gage length, high-frequency response and the capability of measuring large plastic strains. Furthermore, the gage is easily ruled directly onto the specimen, and no mechanical or electrical contact needs to be made during the measurement. These features make the interferometric strain gage particularly suitable for dynamic plastic-strain measurement.
In this paper, the details of an experimental setup for generating and measuring dynamic plastic strain are given. The photometric techniques of measuring the fringe motion of the interference patterns are describle as well as the data-reduction procedure. A typical result is presented, and the validity of the method is established.
Similar content being viewed by others
References
Sharpe, W. N., Jr., “The Interferometric Strain Gage,”Experimental Mechanics 8 (4),164–170 (1968).
Bell, J. F., “Diffraction-grating Strain Gage,”,Proc. of the SESA 17 (2),51–65 (1959).
Bell, J. F. “Propagation of Large-amplitude Waves in Annealed Aluminum,”Jnl. Appl. Phys. 31, (2), 277–282 (1960).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Sharpe, W.N. Dynamic strain measurement with the interferometric strain gage. Experimental Mechanics 10, 89–92 (1970). https://doi.org/10.1007/BF02320138
Issue Date:
DOI: https://doi.org/10.1007/BF02320138