Abstract
This paper describes the work involved in designing a coplanar waveguide -slotline bandpass filter. The filter designed to achieve at least -30dB insertion loss (S21)in the stopband (8 to 8.5; 9.3 to 10 GHz) and less than -0.2 dB in the passband (8.75 to 9.05 GHz), with a centre frequency of 8.9 GHz. The filter and transition were fabricated on 1.27 mm thick RT-Duriod 6010.2 substrate and S-parameters were tested using standard SMA connectors with an HP-8510A network analyser.
Similar content being viewed by others
References
J.B. Knorr, “Slotline transition,” IEEE Trans. Microwave Theory Tech., vol. MTT-22, pp. 548–554, 1974.
B. Schiek and J. Kohler, “An improved microstrip to microslot transition,” IEEE Trans. Microwave Theory Tech., vol. MTT-24, pp. 231–233, 1976.
A. Podecameni and M. L. Coimbra, “Slotline microstrip transition on iso/anesotropic substrate; A more accurate design,” Electron. Lett., vol. 16, no. 20, pp. 780–781, 1980.
M. Houdart, “Coplanar lines: Application to broadband microwave integrated circuits,” in Proc. Sixth European Microwave Conf., pp. 49–53, 1976.
R. A. Pucel, “Design consideration for monolithic microwave circuits,” IEEE Trans. Microwave Theory Tech, vol. MTT-29, pp. 513–534, June 1981.
D. F. Williams and S. E. Schwarz, “Design and performance of coplanar waveguide band pass filters,” IEEE Trans. Microwave Theory Tech., vol. MTT-31, pp. 558–566, 1983.
B. Schuppert, “Microstrip/slotline transition: modelling and experimental investigation,” IEEE Trans. Microwave Theory Tech., vol. MTT-36, pp. 1272–1282, 1988.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Rastogi, A.K. Design and performance of coplanar waveguide slotline bandpass filter. Int J Infrared Milli Waves 17, 915–920 (1996). https://doi.org/10.1007/BF02101399
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF02101399