Summary
On the basis of a survey of the creep behaviour of metals and alloys, and a detailed analysis of creep data of “Nimonic 90”, it is suggested that the representation of fracture times as function of the minimum, equilibrium, creep-rate in log-log coordinates provides a rational method for the abridgement of long-time creep tests of metals and industrially important alloys. The theoretical significance of this type of correlation is considered.
Zusammenfassung
Auf Grund eines Überblicks über das Kriechverhalten von Metallen und Legierungen und einer detailierten Analyse der Kriechdaten von „Mmonic 90“ wird vermutet, daß die Wiedergabe der Bruchzeiten als Funktion des Minimums, Gleichgewichts, der Kriechgeschwindigkeit in log-log-Darstellung eine rationelle Methode für ein abgekürztes Verfahren von Langzeit-Kriechuntersuchungen bei Metallen und industriewichtigen Legierungen darstellt. Die theoretische Bedeutung dieses Korrelationstyps wird betrachtet.
Similar content being viewed by others
References
Oding, I. A., andV. V. Burdukski, Deformation and Flow of Solids, IUTAM Colloquium p. 298 (Madrid 1955).
Balluffi, R. W., andL. L. Seigle, Acta Met.5, 449 (1957).
Feltham, P., andJ. D. Meakin, Acta Met. (in the Press).
Machlin, E. S., Trans. Amer. Inst. Min. Met. Eng.,206, 106 (1956).
Feltham, P., Proc. Phys. Soc. (London), B66, 865 (1953).
Monkman, F. C., andN. J. Grant, Amer. Soc. Test. Mat.56, 593 (1956).
Zhurkov, S. N., andT. P. Sanfirova, Dok. Akad. Nauk SSSR,101, 237 (1955).
Dennison, J. P., J. Inst. Met.86, 177 (1958).
Betteridge, W., J. Inst. Met.86, 232 (1958).
Larson, F. R., andJ. Miller, Trans. Amer. Soc. Mech. Eng.74, 765 (1952).
Manson, S. S., andA. M. Haferd, (U.S.) Nat. Advis. Cttee Aeonauties, Tech. Note1953, 2890.
Orr, R. L., O. D. Sherby andJ. E. Dorn, Trans. Amer. Soc. Metals46, 113, (1954).
Feltham, P., Phil. Mag.2, 584 (1957).
Meakin, J. D., Metals Trans.209, 297 (1951).
“TheNimonicAlloys” Design Data, Henry Wiggin & Co. Ltd., (Birmingham 1956).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Feltham, P., Meakin, J.D. On the representation and extrapolation of creep data of metals and technical alloys. Rheol Acta 1, 176–179 (1958). https://doi.org/10.1007/BF01968862
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF01968862