Contents
The paper deals with the several firing control methods of the self-controlled converter-fed synchronous motor machine-side converter. Applying the Park vector method, the optimal-, shaft-, flux-, and voltage-triggered firing controls were investigated theoretically. Based on the received and even partly new results for practical application the modified shaft control, the flux direction dependent firing control and the firing control triggered by the subtransient flux are recommended, all of them having good torque performance during operation (high exploitations of the converter and the machine). Finally the article presents test results of a flux-triggered converter-fed synchronous motor.
Übersicht
Der Aufsatz behandelt die verschiedenen Zündungsmethoden des motorseitigen Umrichters des selbstgeregelten Stromrichtermotors. Es wird mit der Park-Vektor Methode die optimale-, die Achsen-, die Fluß- und die Spannung-Zündungssteuerungs theoretisch untersucht. Für praktische Anwendungen werden nach den erhaltenen, teilweise neuen Ergebnissen, die modifizierte Achsensteuerung, die von der Richtung des Flusses abhängige Zündungssteuerung und die subtransiente Fluß-Zündungsteuerung empfohlen, die ein hohes Drehmoment (hohe Ausnützung des Umrichters und des Motors) sichern. Abschließend werden Meßergebnisse eines flußgesteuerten Stromrichtermotors dargestellt.
Similar content being viewed by others
References
Kovács, K. P.; Rácz, I.: Transiente Vorgänge in Wechselstrommaschinen. I–II. Budapest Vlg. d. ungar. Akad. d. Wissenschaften 1959
Rácz, I.: Betrachtungens zur Oberwellenproblemen an Asynchronmotoren bei Stromrichterspeisung. Period. Politech. (Electr. Eng.) 11 (1967) 29–47
Rogowsky, Y.: PI-Regelverstärker für die Löschwinkelregelung bei Wechselrichtern in HGÜ-Anlagen. Wiss. Ber. AEG-Telefunken 44 (1971) 6–12
Rácz, I.; Csörgits, F.; Halász, S.; Hunyár, M.; Schmidt, I.: Meßgerät zur Messung des Drehmoments von Wechselstrommaschinen. Elektrie 29 (1975) 47–50
Rácz, I.: Analysis of three-phase semiconductor connections by park-vectors. Control in power electronics and electrical drives. 2. IFAC Symp. Düsseldorf (1977) 37–44
Ruzsányi, T.; Schmidt, I.: Flux-controlled converterfed synchronous motor (in Hungarian). Elektrotechnika 71 (1978) 162–167
Sack, L.: Adaptiver Abtastregler für die Löschwinkel-Regelung beim Stromrichtermotor. ETZ A. 1 (1979) 157–160
Saupe, R.: Die drehzahlgeregelte Synchronmaschine —optimaler Leistungsfaktor durch Einsatz einer Schonzeitregelung. ETZ 102 (1981) 14–18
Richter, W.: Microprocessor control of the inverterfed synchronous motor. Process Automation. (1981) 100–108
Schmidt, I.; Ruzsányi, T.: Inverter controlled Synchronous motor. 4. Power electronics conf. Budapest (1981) II. 203–214
Bencze, J.; Weiner, G.: Machine commutated inverter drives as an economical solution of A.C. drives. Int. conf. on power electronics and variable-speed drives, London (1984) 385–388
Schmidt, I.; Dementev, Y.: Flux controlled super-synchronous cascade (in Russian). Periodica Politechnica (Electr. Eng.) 27 (1983) 223–240
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Schmidt, I. Self control methods of the converter-fed synchronous motor. Archiv f. Elektrotechnik 70, 11–22 (1987). https://doi.org/10.1007/BF01572103
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF01572103