Conclusions
Above we have dealt with a method for testing (plotting) profiles described by any curves. This method is based on the combination of a kinematic method for reproducing cycloidal curves by means of the simplest three-bar motion and programming which sets a definite variable ratio of the angular velocities of two links of this mechanism, thus providing the reproduction of any required curve.
Similar content being viewed by others
Literature cited
N. M. Karelin and V. I. Kiparenko, Izmerit. tekh., No. 11 (1961).
N. M. Karelin and V. I. Kiparenko, Method for Testing Components with Curvilinear Profiles. Authors Certificate Application No. 797785/26-10.
V. A. Ratmirov and B. A. Ivobotenko, Step-by-Step Motors for Automatic Control Systems [in Russian] GÉI (State Power Engineering Press) (Moscow, 1962).
Rights and permissions
About this article
Cite this article
Karelin, N.M., Kiparenko, V.I. Method for automatic checking of components with any curvilinear profile. Meas Tech 6, 725–727 (1963). https://doi.org/10.1007/BF01419341
Issue Date:
DOI: https://doi.org/10.1007/BF01419341